[PATCH v2 1/5] usb: chipidea: imx: rename the DT doc name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To reflect source file name change

Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   31 --------------------
 .../devicetree/bindings/usb/ci_hdrc_imx.txt        |   31 ++++++++++++++++++++
 Documentation/devicetree/bindings/usb/mxs-phy.txt  |   13 --------
 .../devicetree/bindings/usb/phy-mxs-usb.txt        |   13 ++++++++
 4 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
deleted file mode 100644
index b4b5b79..0000000
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
-  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
-  property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbphy: phandler of usb phy that connects to the only one port
-- fsl,usbmisc: phandler of non-core register device, with one argument
-  that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-
-Examples:
-usb@02184000 { /* USB OTG */
-	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-	reg = <0x02184000 0x200>;
-	interrupts = <0 43 0x04>;
-	fsl,usbphy = <&usbphy1>;
-	fsl,usbmisc = <&usbmisc 0>;
-	disable-over-current;
-	external-vbus-divider;
-};
diff --git a/Documentation/devicetree/bindings/usb/ci_hdrc_imx.txt b/Documentation/devicetree/bindings/usb/ci_hdrc_imx.txt
new file mode 100644
index 0000000..b4b5b79
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci_hdrc_imx.txt
@@ -0,0 +1,31 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- fsl,usbmisc: phandler of non-core register device, with one argument
+  that indicate usb controller index
+- vbus-supply: regulator for vbus
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+
+Examples:
+usb@02184000 { /* USB OTG */
+	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+	reg = <0x02184000 0x200>;
+	interrupts = <0 43 0x04>;
+	fsl,usbphy = <&usbphy1>;
+	fsl,usbmisc = <&usbmisc 0>;
+	disable-over-current;
+	external-vbus-divider;
+};
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
deleted file mode 100644
index 5835b27..0000000
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Freescale MXS USB Phy Device
-
-Required properties:
-- compatible: Should be "fsl,imx23-usbphy"
-- reg: Should contain registers location and length
-- interrupts: Should contain phy interrupt
-
-Example:
-usbphy1: usbphy@020c9000 {
-	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-	reg = <0x020c9000 0x1000>;
-	interrupts = <0 44 0x04>;
-};
diff --git a/Documentation/devicetree/bindings/usb/phy-mxs-usb.txt b/Documentation/devicetree/bindings/usb/phy-mxs-usb.txt
new file mode 100644
index 0000000..5835b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/phy-mxs-usb.txt
@@ -0,0 +1,13 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: Should be "fsl,imx23-usbphy"
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+
+Example:
+usbphy1: usbphy@020c9000 {
+	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+	reg = <0x020c9000 0x1000>;
+	interrupts = <0 44 0x04>;
+};
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux