[PATCH 2/2] USB : serial : invoke dcd_change ldisc's handler.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The DCD pin of the serial port can receive a PPS signal. By calling
the port line discipline dcd handle, this patch allow to monitor PPS
through USB serial devices.

However the performance aren't as good as the uart drivers, so
document this point too.

Signed-off-by: Paul Chavent <paul.chavent@xxxxxxxx>
---
 Documentation/pps/pps.txt    | 15 +++++++++++++++
 drivers/usb/serial/generic.c | 10 ++++++++++
 2 files changed, 25 insertions(+)

diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index d35dcdd..c03b1be 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -66,6 +66,21 @@ In LinuxPPS the PPS sources are simply char devices usually mapped
 into files /dev/pps0, /dev/pps1, etc..
 
 
+PPS with USB to serial devices
+------------------------------
+
+It is possible to grab the PPS from an USB to serial device. However,
+you should take into account the latencies and jitter introduced by
+the USB stack. Users has reported clock instability around +-1ms when
+synchronized with PPS through USB. This isn't suited for time server
+synchronization.
+
+If your device doesn't report PPS, you can check that the feature is
+supported by its driver. Most of the time, you only need to add a call
+to usb_serial_handle_dcd_change after checking the DCD status (see
+ch341 and pl2303 examples).
+
+
 Coding example
 --------------
 
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 1f31e6b..3a5dac8 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -570,6 +570,16 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 
 	dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status);
 
+	if (tty) {
+		struct tty_ldisc *ld = tty_ldisc_ref(tty);
+
+		if (ld) {
+			if (ld->ops->dcd_change)
+				ld->ops->dcd_change(tty, status);
+			tty_ldisc_deref(ld);
+		}
+	}
+
 	if (status)
 		wake_up_interruptible(&port->open_wait);
 	else if (tty && !C_CLOCAL(tty))
-- 
1.7.12.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux