Function xhci_readl() is used to read 32bit xHC registers residing in MMIO
address space. It takes as first argument a pointer to the xhci_hcd although
it does not use it because internally it simply calls readl. This creates
an illusion that xhci_readl() is an xhci specific function that has to be
called in a context where a pointer to xhci_hcd is available.
This patch replaces calls to xhci_readl() with calls to readl() in xhci.c.
This is done so that xhci_readl() can be removed completely and code can
become more straightforward.
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---
drivers/usb/host/xhci.c | 92 ++++++++++++++++++++++++-------------------------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9f22ddf..6f47c2b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -60,7 +60,7 @@ int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
u32 result;
do {
- result = xhci_readl(xhci, ptr);
+ result = readl(ptr);
if (result == ~(u32)0) /* card removed */
return -ENODEV;
result &= mask;
@@ -82,11 +82,11 @@ void xhci_quiesce(struct xhci_hcd *xhci)
u32 mask;
mask = ~(XHCI_IRQS);
- halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+ halted = readl(&xhci->op_regs->status) & STS_HALT;
if (!halted)
mask &= ~CMD_RUN;
- cmd = xhci_readl(xhci, &xhci->op_regs->command);
+ cmd = readl(&xhci->op_regs->command);
cmd &= mask;
xhci_writel(xhci, cmd, &xhci->op_regs->command);
}
@@ -124,7 +124,7 @@ static int xhci_start(struct xhci_hcd *xhci)
u32 temp;
int ret;
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
temp);
@@ -158,14 +158,14 @@ int xhci_reset(struct xhci_hcd *xhci)
u32 state;
int ret, i;
- state = xhci_readl(xhci, &xhci->op_regs->status);
+ state = readl(&xhci->op_regs->status);
if ((state & STS_HALT) == 0) {
xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
return 0;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_RESET;
xhci_writel(xhci, command, &xhci->op_regs->command);
@@ -422,7 +422,7 @@ static void compliance_mode_recovery(unsigned long arg)
xhci = (struct xhci_hcd *)arg;
for (i = 0; i < xhci->num_usb3_ports; i++) {
- temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ temp = readl(xhci->usb3_ports[i]);
if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
/*
* Compliance Mode Detected. Letting USB Core
@@ -611,19 +611,19 @@ int xhci_run(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Set the interrupt modulation register");
- temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
temp |= (u32) 160;
xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp |= (CMD_EIE);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Enable interrupts, cmd = 0x%x.", temp);
xhci_writel(xhci, temp, &xhci->op_regs->command);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
@@ -698,9 +698,9 @@ void xhci_stop(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Disabling event ring interrupts");
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
xhci_print_ir_set(xhci, 0);
@@ -709,7 +709,7 @@ void xhci_stop(struct usb_hcd *hcd)
xhci_mem_cleanup(xhci);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_stop completed - status = %x",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
}
/*
@@ -736,21 +736,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_shutdown completed - status = %x",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
}
#ifdef CONFIG_PM
static void xhci_save_registers(struct xhci_hcd *xhci)
{
- xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
- xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+ xhci->s3.command = readl(&xhci->op_regs->command);
+ xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
- xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
- xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
+ xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
}
static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -858,7 +858,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
/* skipped assuming that port suspend has done */
/* step 2: clear Run/Stop bit */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (xhci_handshake(xhci, &xhci->op_regs->status,
@@ -873,7 +873,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci_save_registers(xhci);
/* step 4: set CSS flag */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (xhci_handshake(xhci, &xhci->op_regs->status,
@@ -939,7 +939,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
xhci_set_cmd_ring_deq(xhci);
/* step 3: restore state and start state*/
/* step 3: set CRS flag */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (xhci_handshake(xhci, &xhci->op_regs->status,
@@ -948,7 +948,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
}
/* If restore operation fails, re-initialize the HC during resume */
@@ -972,9 +972,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
xhci_cleanup_msix(xhci);
xhci_dbg(xhci, "// Disabling event ring interrupts\n");
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
xhci_print_ir_set(xhci, 0);
@@ -982,7 +982,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
/* USB core calls the PCI reinit and start functions twice:
* first with the primary HCD, and then with the secondary HCD.
@@ -1011,7 +1011,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
}
/* step 4: set Run/Stop bit */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
@@ -1452,7 +1452,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret || !urb->hcpriv)
goto done;
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"HW died, freeing TD.");
@@ -3583,7 +3583,7 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
spin_lock_irqsave(&xhci->lock, flags);
/* Don't disable the slot if the host controller is dead. */
- state = xhci_readl(xhci, &xhci->op_regs->status);
+ state = readl(&xhci->op_regs->status);
if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
(xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_free_virt_device(xhci, udev->slot_id);
@@ -4082,12 +4082,12 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
if (ret != -ETIMEDOUT) {
/* enter L1 successfully */
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
port_num, temp);
ret = 0;
} else {
- temp = xhci_readl(xhci, pm_addr);
+ temp = readl(pm_addr);
xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
port_num, temp & PORT_L1S_MASK);
ret = -EINVAL;
@@ -4105,7 +4105,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
/* Check PORTSC to make sure the device is in the right state */
if (!ret) {
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp);
if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
(temp & PORT_PLS_MASK) != XDEV_U0) {
@@ -4163,7 +4163,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
port_array = xhci->usb2_ports;
port_num = udev->portnum - 1;
pm_addr = port_array[port_num] + PORTPMSC;
- pm_val = xhci_readl(xhci, pm_addr);
+ pm_val = readl(pm_addr);
hlpm_addr = port_array[port_num] + PORTHLPMC;
field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
@@ -4205,7 +4205,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
xhci_writel(xhci, hlpm_val, hlpm_addr);
/* flush write */
- xhci_readl(xhci, hlpm_addr);
+ readl(hlpm_addr);
} else {
hird = xhci_calculate_hird_besl(xhci, udev);
}
@@ -4213,16 +4213,16 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
pm_val &= ~PORT_HIRD_MASK;
pm_val |= PORT_HIRD(hird) | PORT_RWE;
xhci_writel(xhci, pm_val, pm_addr);
- pm_val = xhci_readl(xhci, pm_addr);
+ pm_val = readl(pm_addr);
pm_val |= PORT_HLE;
xhci_writel(xhci, pm_val, pm_addr);
/* flush write */
- xhci_readl(xhci, pm_addr);
+ readl(pm_addr);
} else {
pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
xhci_writel(xhci, pm_val, pm_addr);
/* flush write */
- xhci_readl(xhci, pm_addr);
+ readl(pm_addr);
if (udev->usb2_hw_lpm_besl_capable) {
spin_unlock_irqrestore(&xhci->lock, flags);
mutex_lock(hcd->bandwidth_mutex);
@@ -4823,7 +4823,7 @@ int xhci_get_frame(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
/* EHCI mods by the periodic size. Why? */
- return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+ return readl(&xhci->run_regs->microframe_index) >> 3;
}
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
@@ -4867,16 +4867,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
- HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+ HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
xhci->run_regs = hcd->regs +
- (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+ (readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
/* Cache read-only capability registers */
- xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
- xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
- xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
- xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
+ xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
+ xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
+ xhci->hcc_params = readl(&xhci->cap_regs->hc_capbase);
xhci->hci_version = HC_VERSION(xhci->hcc_params);
- xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
xhci_print_registers(xhci);
get_quirks(dev, xhci);
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
