Since the slot id retrieved from the command TRB matches the one in Slot ID
field of the command completion event, which is available, there is no need
to determine it again.
This patch removes the uneccessary reassignment to slot id and adds a WARN_ON
in case the two Slot ID fields differ.
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---
Differences from v3:
-the above change is performed now in a separate patch
-a warning is triggered in case the slot id reported in event trb is
different from the slot id renoted in command trb
drivers/usb/host/xhci-ring.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f00d9ef..f68a1f0 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1444,6 +1444,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
}
}
+ WARN_ON(slot_id != TRB_TO_SLOT_ID(
+ le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])));
+
switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
& TRB_TYPE_BITMASK) {
case TRB_TYPE(TRB_ENABLE_SLOT):
@@ -1528,8 +1531,6 @@ bandwidth_change:
break;
case TRB_TYPE(TRB_RESET_DEV):
xhci_dbg(xhci, "Completed reset device command.\n");
- slot_id = TRB_TO_SLOT_ID(
- le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
virt_dev = xhci->devs[slot_id];
if (virt_dev)
handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
