The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.12-rc1
for you to fetch changes up to b9a1048137f4ae43ee90f61a3f34f0efe863cfeb:
usbcore: fix incorrect type in assignment in descriptors_changed() (2013-08-30 18:50:43 -0700)
----------------------------------------------------------------
USB patches for 3.12-rc1
Here's the big USB driver pull request for 3.12-rc1
Lots of USB driver fixes and updates. Nothing major, just the normal
xhci, gadget, and other driver changes. Full details in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Al Cooper (1):
usb: Add Device Tree support to XHCI Platform driver
Alan Stern (9):
USB: remove redundant "#if"
USB: simplify the interface of usb_get_status()
USB: refactor code for enabling/disabling remote wakeup
USB: handle LPM errors during device suspend correctly
USB: EHCI: keep better track of resuming ports
USB: EHCI: don't depend on hardware for tracking port resets and resumes
USB: handle LPM errors during device suspend correctly
USB: OHCI: Allow runtime PM without system sleep
USB: fix build error when CONFIG_PM_SLEEP isn't enabled
Alexey Khoroshilov (1):
usb: gadget: amd5536udc: unconditionally use GFP_ATOMIC in udc_queue()
Anatolij Gustschin (1):
usb: phy: fix build breakage
Andrzej Pietrasiewicz (1):
usb: gadget: configfs: keep a function if it is not successfully added
Andy Shevchenko (4):
usbtmc: remove trailing spaces
usbtmc: call pr_err instead of plain printk
usbtmc: remove redundant braces
usbtmc: convert to devm_kzalloc
Boris BREZILLON (4):
usb: gadget: atmel_usba: prepare clk before calling enable
USB: ohci-at91: add usb_clk for transition to common clk framework
usb: gadget: at91_udc: add missing clk_put on fclk and iclk
usb: gadget: at91_udc: add usb_clk for transition to common clk framework
Chen Wang (1):
USB: usb-skeleton.c: add retry for nonblocking read
Dan Carpenter (6):
USB: mos7720: use GFP_ATOMIC under spinlock
usb: gadget: gadgetfs: use after free in dev_release()
usb: gadget: gadgetfs: potential use after free in unbind()
usb: phy: signedness bugs in suspend/resume functions
usb: gadget: double unlocks on error in atmel_usba_start()
dma: cppi41: off by one in desc_to_chan()
Daniel Mack (1):
usb: ehci-mxc: check for pdata before dereferencing
David Daney (1):
usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs.
Dmitry Kasatkin (2):
xhci:prevent "callbacks suppressed" when debug is not enabled
dev-core: fix build break when DEBUG is enabled
Fabio Estevam (4):
usb: phy: phy-mxs-usb: Check the return value from stmp_reset_block()
usb: chipidea: ci_hdrc_imx: remove unused variable 'res'
usb: chipidea: move hw_phymode_configure() into probe
usb: chipidea: remove previous MODULE_ALIAS
Felipe Balbi (32):
usb: class: cdc-acm: be careful with bInterval
usb: atm: speedtch: be careful with bInterval
usb: clamp bInterval to allowed range
usb: dwc3: make glue layers selectable
usb: gadget: remove imx_udc
usb: dwc3: gadget: don't request IRQs in atomic
usb: dwc3: switch to GPL v2 only
usb: phy: protect against NULL phy pointers
usb: common: introduce of_usb_get_maximum_speed()
usb: dwc3: let non-DT platforms pass tx-fifo-resize flag;
usb: dwc3: make maximum-speed a per-instance attribute
usb: dwc3: core: switch to snps,dwc3
usb: dwc3: gadget: drop dwc3 manual phy control
usb: dwc3: omap: switch over to devm_ioremap_resource()
usb: dwc3: core: switch over to devm_ioremap_resource()
usb: dwc3: gadget: move debugging print around
usb: dwc3: gadget: move direction setting up
usb: dwc3: gadget: add a debugging print when initializing endpoints
usb: dwc3: core: don't redefine DWC3_DCFG_LPM_CAP
usb: dwc3: gadget: don't enable LPM early
usb: dwc3: core: introduce and use macros for Event Size register
usb: dwc3: gadget: get rid of IRQF_ONESHOT
usb: dwc3: gadget: rename dwc3_process_event_buf
usb: dwc3: gadget: introduce dwc3_process_event_buf
usb: gadget: udc-core: move sysfs_notify() to a workqueue
usb: dwc3: ep0: only change to ADDRESS if set_config() succeeds
usb: dwc3: ep0: don't change to configured state too early
usb: of: fix build breakage caused by recent patches
usb: dwc3: use dev_get_platdata()
Merge branch 'nop-phy-rename' into next
usb: musb: dsps: make it depend on OF_IRQ
usb: dwc3: core: cope with NULL pdata
Feng-Hsin Chiang (1):
usb: host: Faraday fotg210-hcd driver
Frank Schäfer (12):
USB: serial: pl2303: fix the upper baud rate limit check for type_0/1 chips
USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type
usb: pl2303: fix+improve the divsor based baud rate encoding method
usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method
usb: pl2303: remove 500000 baud from the list of standard baud rates
usb: pl2303: move the two baud rate encoding methods to separate functions
usb: pl2303: increase the allowed baud rate range for the divisor based encoding method
usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips
usb: pl2303: add two comments concerning the supported baud rates with HX chips
pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()
pl2303: improve the chip type information output on startup
pl2303: improve the chip type detection/distinction
Geert Uytterhoeven (3):
usb: gadget: USB_FUSB300 should depend on HAS_DMA
usb: gadget: USB_R8A66597 should depend on HAS_DMA
usb: gadget: USB_NET2272_DMA should depend on HAS_DMA
Graham Williams (1):
usb: acm gadget: Null termintate strings table
Greg Kroah-Hartman (46):
USB: ldusb: remove custom dbg_info() macro
USB: legotower: remove unneeded tracing macros
USB: legousbtower: remove custom debug macro
USB: legotower: remove custom debug macro and module parameter
USB: legotower: remove direct calls to printk()
USB: adutux: remove unneeded tracing macros
USB: adutux: remove custom debug macro
USB: adutux: remove custom debug macro and module parameter
USB: adutux: remove direct calls to printk()
USB: misc: remove CONFIG_USB_DEBUG from Makefile
USB: usbatm: remove unused UDSL_ASSERT macro
USB: usbatm: remove unneeded trace printk calls
USB: usbatm: don't rely on CONFIG_USB_DEBUG
USB: usbatm: move the atm_dbg() call to use dynamic debug
USB: usbatm: remove CONFIG_USB_DEBUG dependancy
USB: phy: remove custom DBG macro
USB: phy: remove CONFIG_USB_DEBUG usage
USB: gadget: fix up comment
USB: isp1362: remove unused _BUG_ON() calls
USB: isp1362: remove unused _WARN_ON() calls
USB: isp1362: remove _DBG() usage
USB: isp1362: remove CONFIG_USB_DEBUG dependency
USB: isp116x: remove dependency on CONFIG_USB_DEBUG
USB: sl811: remove CONFIG_USB_DEBUG dependency
Merge tag 'for-usb-next-2013-07-23' of git://git.kernel.org/.../sarah/xhci into usb-next
USB: remove unneeded idr.h include
USB: sl811: move debug files from proc to debugfs
USB: isp1362: move debug files from proc to debugfs
Revert "usb: host: Faraday fotg210-hcd driver"
usb: musb: get rid of unused proc_dir_entry
Merge 3.11-rc3 into usb-next
Merge 3.11-rc4 into usb-next
USB: serial: move the "simple" drivers into usb-serial-simple.c
Merge tag 'usb-for-v3.12' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'for-usb-next-2013-08-15' of git://git.kernel.org/.../sarah/xhci into usb-next
Merge 3.11-rc6 into usb-next
Merge tag 'for-usb-2013-08-15-step-2' of ra.kernel.org:/.../sarah/xhci into work-next
USB: core: use DRIVER_ATTR_RW()
USB: core: be specific about attribute permissions
USB: usbtmc: fix up attribute permissions
USB: serial: clean up attribute permissions
USB: gadget: audit sysfs attribute permissions
Merge tag 'for-usb-next-2013-08-27' of git://git.kernel.org/.../sarah/xhci into usb-next
USB storage: audit sysfs attribute permissions
Merge tag 'usb-for-v3.12-part2' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'for-usb-next-2013-08-27-15-07' of git://git.kernel.org/.../sarah/xhci into usb-next
H Hartley Sweeten (4):
usb: ohci-ep93xx: use devm_ioremap_resource()
usb: ohci-ep93xx: use platform_get_irq()
usb: ohci-ep93xx: use devm_clk_get()
usb: ohci-ep93xx: tidy up driver (*probe) and (*remove)
Hans de Goede (8):
usbfs: Allow printer class 'get_device_id' without needing to claim the intf
usb: config->desc.bLength may not exceed amount of data returned by the device
proc_usb_info.txt: Correct documentation about endianness of config descriptors
Documentation sysfs-bus-usb: Correct use of devnum
Documentation sysfs-bus-usb: Document all files used by libusb
Documentation sysfs-bus-usb: Move files with known users to stable
Documentation sysfs-bus-usb: Document the speed file used by libusb
Documentation sysfs-bus-usb: Document which files are used by libusb
Huang Rui (2):
usb: dwc3: clean up redundant parameter comment
usb: dwc3: fix typo in comment of dwc3_ep
Ivan T. Ivanov (1):
usb: dwc3: core: modify IO memory resource after deferred probe completes
Jack Pham (1):
usb: host: add Kconfig option for EHSET
Jingoo Han (18):
usb: gadget: use dev_get_platdata()
usb: phy: use dev_get_platdata()
usb: musb: use dev_get_platdata()
usb: renesas: use dev_get_platdata()
USB: c67x00: use dev_get_platdata()
usb: renesas: use dev_get_platdata()
usb: misc: usb3503: use dev_get_platdata()
USB: host: use dev_get_platdata()
usb: dwc3: pci: add CONFIG_PM_SLEEP to suspend/resume functions
usb: gadget: goku_udc: use NULL instead of 0
usb: gadget: fusb300_udc: Staticize fusb300_rdcxf()
usb: gadget: f_mass_storage: use NULL instead of 0
usb: gadget: rndis: Staticize rndis_init()/rndis_exit()
usb: gadget: u_uac1: add __user annotation
usb: gadget: f_uac1: Staticize local functions
usb: phy: mv-u3d: Staticize mv_u3d_phy_shutdown()
usb: phy: mv-usb: remove incorrect __exit_p annotation
uwb: Staticize local symbols
Joe Perches (2):
xhci: Correct misplaced newlines
MAINTAINERS: USB, remove F: drivers/net/usb/ pattern
Johan Hovold (29):
USB: serial: remove defensive test from set_termios
USB: serial: remove hupping check from tiocmiwait
USB: serial: clean up dtr_rts
USB: serial: set drain delay at port probe
USB: console: use dev_dbg
USB: console: remove unnecessary operations test
USB: pl2303: refactor baud-rate handling
USB: pl2303: clean up baud-rate handling
USB: pl2303: clean up set_termios
USB: pl2303: remove debugging noise
USB: oti6858: do not call set_termios with uninitialised data
USB: ftdi_sio: clean up device initialisation
USB: ftdi_sio: remove redundant raise of DTR/RTS at open
USB: ftdi_sio: remove vendor/product module parameters
USB: ftdi_sio: remove unused defines
USB: io_edgeport: remove unused defines
USB: io_ti: kill private fifo
USB: io_ti: move port initialisation to probe
USB: mos7840: remove broken chase implementation
USB: safe_serial: remove vendor/product module parameters
USB: ti_usb_3410_5052: kill private fifo
USB: ti_usb_3410_5052: remove unused wait queue
USB: ti_usb_3410_5052: remove vendor/product module parameters
USB: keyspan: fix serial DMA-buffer allocations
USB: keyspan: fix port DMA-buffer allocations
USB: quatech2: fix serial DMA-buffer allocations
USB: quatech2: fix port DMA-buffer allocations
USB: uss720: fix DMA-buffer allocation
USB: mos7720: fix big-endian control requests
Julia Lawall (1):
usb: musb: dsps: fix devm_ioremap_resource error detection code
Julius Werner (1):
usb: core: don't try to reset_device() a port that got just disconnected
Krzysztof Mazur (3):
usb: fix cleanup after failure in hub_configure()
usb: fail on usb_hub_create_port_device() errors
usb: don't use bNbrPorts after initialization
Kumar Gala (1):
usb: dwc3: core: clarify usb-phy array binding
Kuninori Morimoto (1):
usb: renesas_usbhs: tidyup original usbhsx_for_each_xxx macro
Lan Tianyu (1):
usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
Laurent Pinchart (1):
usb: gadget: uvc: Fix error handling in uvc_queue_buffer()
Lee Jones (1):
usb: musb: ux500: Add check for NULL board data
Libo Chen (5):
usb: fotg210-udc: use platform_{get,set}_drvdata()
usb: renesas_usbhs: use platform_{get,set}_drvdata()
usb: ohci-at91: remove unnecessary dev_set_drvdata()
usb: phy-tegra-usb: use platform_{get,set}_drvdata()
usb: r8a66597-hcd: use platform_{get,set}_drvdata()
Lothar Waßmann (4):
usb: chipidea: improve kconfig 2.0
usb: chipidea: ci_hdrc_imx: remove an unsolicited module_put() call from ci_hdrc_imx_remove()
usb: chipidea: don't clobber return value of ci_role_start()
usb: chipidea: prevent endless loop registering platform_devices when probe fails
Maarten ter Huurne (1):
usb: musb: avoid null pointer dereference in debug logging
Manu Gautam (2):
usb: misc: EHSET Test Fixture device driver for host compliance
usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
Mark Brown (12):
usb: misc: Fix swapped properties in usb3503 DT parsing
usb: misc: usb3503: Convert to devm_ APIs
usb: misc: usb3503: Use gpio_set_value_cansleep()
usb: misc: usb3503: Actively manage Hub Connect GPIO
usb: misc: usb3503: Convert to regmap
usb: misc: usb3503: Factor out I2C probe
usb: misc: usb3503: Fix typos in error messages
usb: misc: usb3503: Default to hub mode
usb: misc: usb3503: Add USB3503A to the compatible list
usb: misc: usb3503: Don't specify all DT properties as required
usb: misc: usb3503: Support operation with no I2C control
usb/hcd: Log error code if reset() fails
Mathias Nyman (2):
Intel xhci: refactor EHCI/xHCI port switching
xhci: fix port BESL LPM capability checking
Mikko Perttunen (6):
arm: dts: tegra20: Rename USB UTMI parameters according to new definitions
usb: phy: tegra: Read UTMIP parameters from device tree
usb: tegra: Use regulators instead of GPIOs for USB PHY VBUS
usb: tegra: Add vbus-supply property for host mode PHYs
arm: tegra: Remove obsolete nvidia,vbus-gpio properties
usb: tegra: Fix typo in tegra20-usb-phy documentation
Ming Lei (10):
USB: check sg buffer size in usb_submit_urb
USB: HCD: support giveback of URB in tasklet context
USB: URB documentation: claim complete() will be run with IRQs enabled
USB: EHCI: improve ehci_endpoint_disable
USB: EHCI: improve interrupt qh unlink
USB: EHCI: support running URB giveback in tasklet context
USB: introduce usb_device_no_sg_constraint() helper
USB: XHCI: mark no_sg_constraint
USBNET: support DMA SG
USBNET: ax88179_178a: enable tso if usb host supports sg dma
Oliver Neukum (1):
USB: cdc-wdm: fix race between interrupt handler and tasklet
Paul Gortmaker (1):
usb: limit OMAP related USB options to OMAP2PLUS platforms
Peter Chen (14):
usb: chipidea: imx: delete the dead code
usb: chipidea: move vbus regulator operation to core
usb: chipidea: host: add vbus regulator control
usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users
usb: chipidea: otg: add otg file used to access otgsc
usb: chipidea: add role init and destroy APIs
usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
usb: chipidea: disable all interrupts and clear all interrupts status
usb: chipidea: move otg related things to otg file
usb: chipidea: add vbus interrupt handler
usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
usb: chipidea: udc: fix misuse of REGS_SHARED and PULLUP_ON_VBUS flags
usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS
usb: chipidea: udc: .pullup is valid only when vbus is there
Philippe De Swert (1):
usb:gadget Fix comment for pointer to configfs
Roger Quadros (4):
USB: host: Use usb_hcd_platform_shutdown() wherever possible
usb: phy: make PHY driver selection possible by controller drivers
usb: ehci-omap: select NOP_USB_XCEIV PHY driver
usb: phy: omap-usb3: Improve DPLL parameter lookup code
Ruchika Kharwar (1):
usb: dwc3: adapt to use dr_mode device tree helper
Sachin Kamat (1):
usb: dwc3: Remove duplicate inclusion of otg.h
Sarah Sharp (6):
xhci: Refactor port status into a new function.
xhci: Report USB 2.1 link status for L1
usb: Don't fail port power resume on device disconnect.
xhci-plat: Don't enable legacy PCI interrupts.
Merge tag 'for-usb-2013-08-15-step-1' into for-usb-next
xhci: Fix warning introduced by disabling runtime PM.
Sascha Hauer (1):
USB: chipidea: i.MX: simplify usbmisc
Sean O. Stalley (1):
usb: rh_call_control tbuf overflow fix
Sebastian Andrzej Siewior (32):
usb: musb: replace ifndef with ifdef for CONFIG_MUSB_PIO_ONLY
usb: musb: musbhsdma: drop the controller check in dma_controller_destroy()
usb: musb: dma: merge ->start/stop into create/destroy
usb: musb: provide empty dma_controller_create() in PIO mode
usb: musb: remove a few is_dma_capable() in init/exit code
usb: musb: core: call dma_controller_destroy() in the err path
usb: musb: unmap reqs in musb_gadget_queue()'s error case
usb: musb: dsps: init / shutdown the phy
usb: musb: remove ti81xx pieces from musb
usb: musb: do not change dev's dma_mask
usb: musb: dsps: rename ti81xx_driver_data to am33xx_driver_data
usb: musb: dsps: remove EOI access
usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
usb: phy: phy-generic: export init functions
usb: phy: Add AM335x PHY driver
usb: musb: dsps: remove the hardcoded phy pieces
usb: musb: dsps: use proper child nodes
usb: musb dma: add cppi41 dma driver
usb: musb: Use is_cppi_enabled() and tusb_dma_omap() instead of the ifdef
usb: musb: cppi41: Enable in device-TX mode
usb: phy: am335x: include linux/err.h
usb: musb: honour the return value of dma_map_single()
usb: phy: am335x-control: make it compile with
dma: cpp41: make it compile with CONFIG_BUG=n
usb: musb: only remove host/udc if it has been added
usb: musb: dsps fix the typo in reg-names of the dma node
usb: usb: dsps: update device tree bindings
usb: usb: dsps: update code according to the binding document
usb: musb: dsps: do not set is_active on the first drvbus interrupt
usb: musb: am335x-evm: Do not remove the session bit HOST-only mode
usb: musb: am335x: add second port to beagle bone
dma: cpp41: enable pm_runtime during init
Shawn Nematbakhsh (1):
usb: xhci: Disable runtime PM suspend for quirky controllers
Thomas Pugliese (9):
wusbcore: fix root hub hub_status_data to only return > 0 if status has actually changed
wusbcore: clean up list locking in urb enqueue
HWA RC: fix a kernel panic when unplugging the HWA dongle
HWA: avoid constant suspend and resume on the root hub
UWB: fix sysfs warning on HWA device unplug.
USB: WUSBCORE: clear RPIPE stall for control endpoints
USB: WUSBCORE: fix resource cleanup in error path in __wa_xfer_setup_segs
USB: WUSBCORE: fix leak of urb in wa_xfer_destroy.
USB: WUSBCORE: Use usb_init_urb instead of creating the URB manually
Tomasz Figa (1):
usb: gadget: s3c-hsotg: Allow driver instantiation using device tree
Tuomas Tynkkynen (16):
usb: phy: tegra: Remove unnecessary 'dev' field
usb: host: tegra: Remove leftover code
usb: tegra: host: Remove references to plat data
ARM: tegra: Remove USB platform data
usb: phy: tegra: Register as an USB PHY.
usb: host: tegra: Locate a PHY via standard API
usb: phy: tegra: Remove custom PHY locating APIs
usb: phy: tegra: Use DT helpers for phy_type
usb: phy: tegra: Use DT helpers for dr_mode
usb: phy: tegra: Use switch instead of if-else
usb: host: add has_tdi_phy_lpm capability bit
usb: phy: tegra: Fix wrong PHY parameters
usb: phy: tegra: Tegra30 support
Documentation: New DT parameters for tegra30-usb-phy
usb: phy: tegra: Program new PHY parameters
usb: host: tegra: Tegra30 support
Vikas Sajjan (1):
usb: xhci: add the suspend/resume functionality
Wei Yongjun (1):
usb: musb: cppi41: fix missing unlock on error in cppi41_dma_callback()
Wolfram Sang (1):
usb: phy: don't check resource with devm_ioremap_resource
Xenia Ragiadakou (19):
xhci: replace xhci_info() with xhci_dbg()
xhci: replace printk(KERN_DEBUG ...)
xhci: remove CONFIG_USB_XHCI_HCD_DEBUGGING and unused code
xhci: add traces for debug messages in xhci_address_device()
xhci: add trace for debug messages related to changing contexts
xhci: add trace for debug messages related to quirks
xhci: add trace for debug messages related to endpoint reset
xhci: add xhci_address_ctx trace event
xhci: add xhci_cmd_completion trace event
xhci: trace debug statements for urb cancellation
xhci: trace debug messages related to driver initialization and unload
xhci: trace debug statements related to ring expansion
xhci: fix dma mask setup in xhci.c
ehci: remove ehci_vdbg() verbose debugging statements
ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set
ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c
ehci: remove debugging statement with ehci statistics in ehci_stop()
usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()
usbcore: fix incorrect type in assignment in descriptors_changed()
Yacine Belkadi (1):
usb: fix some scripts/kernel-doc warnings
Yann Droneaud (1):
USB: serial: fix stringify operator in usb-serial-simple
Yuan-Hsin Chen (1):
usb: host: Faraday fotg210-hcd driver
caizhiyong (1):
USB: ohci_usb warn "irq nobody cared" on shutdown
Documentation/ABI/stable/sysfs-bus-usb | 142 +
Documentation/ABI/testing/sysfs-bus-usb | 89 -
.../devicetree/bindings/usb/am33xx-usb.txt | 222 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 8 +-
Documentation/devicetree/bindings/usb/generic.txt | 24 +
.../bindings/usb/nvidia,tegra20-usb-phy.txt | 17 +-
.../devicetree/bindings/usb/samsung-hsotg.txt | 40 +
Documentation/devicetree/bindings/usb/usb-xhci.txt | 14 +
Documentation/devicetree/bindings/usb/usb3503.txt | 7 +-
Documentation/usb/URB.txt | 21 +-
Documentation/usb/proc_usb_info.txt | 9 +-
MAINTAINERS | 1 -
arch/arm/boot/dts/am335x-bone.dts | 29 +
arch/arm/boot/dts/am335x-evm.dts | 29 +
arch/arm/boot/dts/am335x-evmsk.dts | 16 +
arch/arm/boot/dts/am33xx.dtsi | 143 +-
arch/arm/boot/dts/omap5.dtsi | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 1 -
arch/arm/boot/dts/tegra20-trimslice.dts | 1 -
arch/arm/boot/dts/tegra20-whistler.dts | 2 -
arch/arm/boot/dts/tegra20.dtsi | 28 +-
arch/arm/mach-omap2/board-omap3beagle.c | 4 +-
arch/arm/mach-omap2/board-omap3evm.c | 4 +-
arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
arch/arm/mach-omap2/usb-host.c | 10 +-
arch/arm/mach-tegra/tegra.c | 38 +-
drivers/dma/Kconfig | 8 +
drivers/dma/Makefile | 1 +
drivers/dma/cppi41.c | 1059 ++++
drivers/net/usb/ax88179_178a.c | 8 +
drivers/net/usb/usbnet.c | 45 +-
drivers/usb/Kconfig | 17 +
drivers/usb/Makefile | 3 +-
drivers/usb/atm/Makefile | 3 -
drivers/usb/atm/speedtch.c | 2 +-
drivers/usb/atm/usbatm.c | 49 +-
drivers/usb/atm/usbatm.h | 35 +-
drivers/usb/c67x00/c67x00-drv.c | 4 +-
drivers/usb/chipidea/Kconfig | 7 +-
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/bits.h | 10 +
drivers/usb/chipidea/ci.h | 8 +
drivers/usb/chipidea/ci_hdrc_imx.c | 110 +-
drivers/usb/chipidea/ci_hdrc_imx.h | 17 +-
drivers/usb/chipidea/ci_hdrc_msm.c | 1 -
drivers/usb/chipidea/core.c | 197 +-
drivers/usb/chipidea/host.c | 31 +-
drivers/usb/chipidea/host.h | 6 +
drivers/usb/chipidea/otg.c | 120 +
drivers/usb/chipidea/otg.h | 35 +
drivers/usb/chipidea/udc.c | 78 +-
drivers/usb/chipidea/udc.h | 6 +
drivers/usb/chipidea/usbmisc_imx.c | 95 +-
drivers/usb/class/cdc-acm.c | 2 +-
drivers/usb/class/cdc-wdm.c | 13 +-
drivers/usb/class/usbtmc.c | 62 +-
drivers/usb/core/buffer.c | 5 +-
drivers/usb/core/config.c | 3 +-
drivers/usb/core/devio.c | 6 +-
drivers/usb/core/driver.c | 46 +-
drivers/usb/core/endpoint.c | 37 +-
drivers/usb/core/file.c | 2 +-
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/core/hcd.c | 227 +-
drivers/usb/core/hub.c | 235 +-
drivers/usb/core/message.c | 62 +-
drivers/usb/core/port.c | 20 +-
drivers/usb/core/sysfs.c | 303 +-
drivers/usb/core/urb.c | 43 +-
drivers/usb/core/usb.c | 60 +-
drivers/usb/dwc3/Kconfig | 32 +
drivers/usb/dwc3/Makefile | 13 +-
drivers/usb/dwc3/core.c | 197 +-
drivers/usb/dwc3/core.h | 53 +-
drivers/usb/dwc3/debug.h | 34 +-
drivers/usb/dwc3/debugfs.c | 34 +-
drivers/usb/dwc3/dwc3-exynos.c | 22 +-
drivers/usb/dwc3/dwc3-omap.c | 44 +-
drivers/usb/dwc3/dwc3-pci.c | 54 +-
drivers/usb/dwc3/ep0.c | 49 +-
drivers/usb/dwc3/gadget.c | 257 +-
drivers/usb/dwc3/gadget.h | 34 +-
drivers/usb/dwc3/host.c | 34 +-
drivers/usb/dwc3/io.h | 34 +-
drivers/usb/dwc3/platform_data.h | 27 +
drivers/usb/gadget/Kconfig | 24 +-
drivers/usb/gadget/Makefile | 1 -
drivers/usb/gadget/amd5536udc.c | 4 +-
drivers/usb/gadget/at91_udc.c | 25 +-
drivers/usb/gadget/at91_udc.h | 2 +-
drivers/usb/gadget/atmel_usba_udc.c | 26 +-
drivers/usb/gadget/bcm63xx_udc.c | 2 +-
drivers/usb/gadget/composite.c | 8 +-
drivers/usb/gadget/configfs.c | 4 +-
drivers/usb/gadget/dummy_hcd.c | 8 +-
drivers/usb/gadget/f_acm.c | 1 +
drivers/usb/gadget/f_fs.c | 2 +-
drivers/usb/gadget/f_mass_storage.c | 18 +-
drivers/usb/gadget/f_uac1.c | 4 +-
drivers/usb/gadget/fotg210-udc.c | 4 +-
drivers/usb/gadget/fsl_mxc_udc.c | 4 +-
drivers/usb/gadget/fsl_udc_core.c | 6 +-
drivers/usb/gadget/fusb300_udc.c | 2 +-
drivers/usb/gadget/goku_udc.c | 2 +-
drivers/usb/gadget/hid.c | 2 +-
drivers/usb/gadget/imx_udc.c | 1544 -----
drivers/usb/gadget/imx_udc.h | 351 --
drivers/usb/gadget/inode.c | 4 -
drivers/usb/gadget/m66592-udc.c | 4 +-
drivers/usb/gadget/mv_u3d_core.c | 12 +-
drivers/usb/gadget/mv_udc_core.c | 4 +-
drivers/usb/gadget/net2272.c | 4 +-
drivers/usb/gadget/net2280.c | 18 +-
drivers/usb/gadget/omap_udc.c | 2 +-
drivers/usb/gadget/pxa25x_udc.c | 2 +-
drivers/usb/gadget/pxa27x_udc.c | 2 +-
drivers/usb/gadget/r8a66597-udc.c | 2 +-
drivers/usb/gadget/rndis.c | 4 +-
drivers/usb/gadget/s3c-hsotg.c | 14 +-
drivers/usb/gadget/s3c-hsudc.c | 4 +-
drivers/usb/gadget/s3c2410_udc.c | 2 +-
drivers/usb/gadget/storage_common.c | 27 +-
drivers/usb/gadget/u_uac1.c | 2 +-
drivers/usb/gadget/udc-core.c | 26 +-
drivers/usb/gadget/uvc_queue.c | 6 +-
drivers/usb/host/Kconfig | 63 +-
drivers/usb/host/Makefile | 5 +
drivers/usb/host/ehci-dbg.c | 9 +-
drivers/usb/host/ehci-fsl.c | 18 +-
drivers/usb/host/ehci-grlib.c | 13 +-
drivers/usb/host/ehci-hcd.c | 33 +-
drivers/usb/host/ehci-hub.c | 232 +-
drivers/usb/host/ehci-mem.c | 1 +
drivers/usb/host/ehci-mv.c | 4 +-
drivers/usb/host/ehci-mxc.c | 16 +-
drivers/usb/host/ehci-octeon.c | 2 +-
drivers/usb/host/ehci-omap.c | 14 +-
drivers/usb/host/ehci-orion.c | 2 +-
drivers/usb/host/ehci-pci.c | 42 -
drivers/usb/host/ehci-platform.c | 12 +-
drivers/usb/host/ehci-pmcmsp.c | 2 +-
drivers/usb/host/ehci-ppc-of.c | 13 +-
drivers/usb/host/ehci-ps3.c | 2 +-
drivers/usb/host/ehci-q.c | 119 +-
drivers/usb/host/ehci-s5p.c | 12 +-
drivers/usb/host/ehci-sched.c | 105 +-
drivers/usb/host/ehci-sead3.c | 2 +-
drivers/usb/host/ehci-sh.c | 4 +-
drivers/usb/host/ehci-tegra.c | 95 +-
drivers/usb/host/ehci-tilegx.c | 6 +-
drivers/usb/host/ehci-timer.c | 34 +-
drivers/usb/host/ehci-w90x900.c | 2 +-
drivers/usb/host/ehci-xilinx-of.c | 19 +-
drivers/usb/host/ehci.h | 17 +-
drivers/usb/host/fotg210-hcd.c | 6049 ++++++++++++++++++++
drivers/usb/host/fotg210.h | 750 +++
drivers/usb/host/fsl-mph-dr-of.c | 4 +-
drivers/usb/host/hwa-hc.c | 7 +
drivers/usb/host/imx21-hcd.c | 2 +-
drivers/usb/host/isp116x-hcd.c | 2 +-
drivers/usb/host/isp116x.h | 13 +-
drivers/usb/host/isp1362-hcd.c | 85 +-
drivers/usb/host/isp1362.h | 53 +-
drivers/usb/host/isp1760-if.c | 2 +-
drivers/usb/host/ohci-at91.c | 37 +-
drivers/usb/host/ohci-da8xx.c | 8 +-
drivers/usb/host/ohci-ep93xx.c | 137 +-
drivers/usb/host/ohci-exynos.c | 2 +-
drivers/usb/host/ohci-hcd.c | 2 +-
drivers/usb/host/ohci-omap.c | 4 +-
drivers/usb/host/ohci-omap3.c | 10 +-
drivers/usb/host/ohci-pci.c | 2 +-
drivers/usb/host/ohci-platform.c | 10 +-
drivers/usb/host/ohci-ppc-of.c | 11 +-
drivers/usb/host/ohci-pxa27x.c | 8 +-
drivers/usb/host/ohci-s3c2410.c | 11 +-
drivers/usb/host/ohci-tilegx.c | 4 +-
drivers/usb/host/pci-quirks.c | 48 +-
drivers/usb/host/pci-quirks.h | 3 +-
drivers/usb/host/r8a66597-hcd.c | 6 +-
drivers/usb/host/sl811-hcd.c | 109 +-
drivers/usb/host/sl811.h | 21 +-
drivers/usb/host/u132-hcd.c | 6 +-
drivers/usb/host/xhci-dbg.c | 14 +
drivers/usb/host/xhci-ext-caps.h | 2 +-
drivers/usb/host/xhci-hub.c | 228 +-
drivers/usb/host/xhci-mem.c | 187 +-
drivers/usb/host/xhci-pci.c | 28 +-
drivers/usb/host/xhci-plat.c | 48 +-
drivers/usb/host/xhci-ring.c | 113 +-
drivers/usb/host/xhci-trace.c | 15 +
drivers/usb/host/xhci-trace.h | 151 +
drivers/usb/host/xhci.c | 378 +-
drivers/usb/host/xhci.h | 18 +-
drivers/usb/misc/Kconfig | 14 +
drivers/usb/misc/Makefile | 4 +-
drivers/usb/misc/adutux.c | 200 +-
drivers/usb/misc/ehset.c | 152 +
drivers/usb/misc/ldusb.c | 31 +-
drivers/usb/misc/legousbtower.c | 124 +-
drivers/usb/misc/usb3503.c | 284 +-
drivers/usb/misc/usbtest.c | 9 +-
drivers/usb/misc/uss720.c | 24 +-
drivers/usb/musb/Kconfig | 9 +
drivers/usb/musb/Makefile | 4 +
drivers/usb/musb/am35x.c | 16 +-
drivers/usb/musb/blackfin.c | 4 +-
drivers/usb/musb/cppi_dma.c | 18 +-
drivers/usb/musb/da8xx.c | 4 +-
drivers/usb/musb/davinci.c | 4 +-
drivers/usb/musb/musb_am335x.c | 55 +
drivers/usb/musb/musb_core.c | 31 +-
drivers/usb/musb/musb_core.h | 8 -
drivers/usb/musb/musb_cppi41.c | 557 ++
drivers/usb/musb/musb_dma.h | 21 +-
drivers/usb/musb/musb_dsps.c | 395 +-
drivers/usb/musb/musb_gadget.c | 102 +-
drivers/usb/musb/musb_host.c | 2 +
drivers/usb/musb/musbhsdma.c | 17 +-
drivers/usb/musb/omap2430.c | 8 +-
drivers/usb/musb/tusb6010.c | 4 +-
drivers/usb/musb/tusb6010_omap.c | 24 -
drivers/usb/musb/ux500.c | 2 +-
drivers/usb/musb/ux500_dma.c | 25 +-
drivers/usb/phy/Kconfig | 50 +-
drivers/usb/phy/Makefile | 7 +-
drivers/usb/phy/am35x-phy-control.h | 21 +
drivers/usb/phy/phy-am335x-control.c | 137 +
drivers/usb/phy/phy-am335x.c | 99 +
drivers/usb/phy/phy-fsl-usb.c | 12 +-
drivers/usb/phy/phy-fsl-usb.h | 2 +-
drivers/usb/phy/phy-fsm-usb.c | 2 +-
drivers/usb/phy/phy-fsm-usb.h | 11 +-
drivers/usb/phy/{phy-nop.c => phy-generic.c} | 167 +-
drivers/usb/phy/phy-generic.h | 20 +
drivers/usb/phy/phy-gpio-vbus-usb.c | 10 +-
drivers/usb/phy/phy-isp1301-omap.c | 6 +-
drivers/usb/phy/phy-msm-usb.c | 4 +-
drivers/usb/phy/phy-mv-u3d-usb.c | 4 +-
drivers/usb/phy/phy-mv-usb.c | 6 +-
drivers/usb/phy/phy-mxs-usb.c | 13 +-
drivers/usb/phy/phy-omap-control.c | 3 +-
drivers/usb/phy/phy-omap-usb2.c | 7 +-
drivers/usb/phy/phy-omap-usb3.c | 87 +-
drivers/usb/phy/phy-rcar-usb.c | 9 +-
drivers/usb/phy/phy-samsung-usb2.c | 2 +-
drivers/usb/phy/phy-samsung-usb3.c | 2 +-
drivers/usb/phy/phy-tegra-usb.c | 462 +-
drivers/usb/phy/phy-twl4030-usb.c | 2 +-
drivers/usb/phy/phy-twl6030-usb.c | 2 +-
drivers/usb/renesas_usbhs/common.c | 6 +-
drivers/usb/renesas_usbhs/mod_gadget.c | 6 +-
drivers/usb/renesas_usbhs/mod_host.c | 6 +-
drivers/usb/renesas_usbhs/pipe.h | 6 +-
drivers/usb/serial/Kconfig | 84 +-
drivers/usb/serial/Makefile | 9 +-
drivers/usb/serial/bus.c | 5 +-
drivers/usb/serial/console.c | 27 +-
drivers/usb/serial/cp210x.c | 3 -
drivers/usb/serial/cypress_m8.c | 4 +-
drivers/usb/serial/f81232.c | 3 +-
drivers/usb/serial/flashloader.c | 39 -
drivers/usb/serial/ftdi_sio.c | 67 +-
drivers/usb/serial/funsoft.c | 40 -
drivers/usb/serial/generic.c | 13 +-
drivers/usb/serial/hp4x.c | 51 -
drivers/usb/serial/io_edgeport.c | 2 -
drivers/usb/serial/io_ti.c | 79 +-
drivers/usb/serial/iuu_phoenix.c | 8 +-
drivers/usb/serial/keyspan.c | 104 +-
drivers/usb/serial/mos7720.c | 6 +-
drivers/usb/serial/mos7840.c | 48 -
drivers/usb/serial/moto_modem.c | 48 -
drivers/usb/serial/oti6858.c | 10 +-
drivers/usb/serial/pl2303.c | 352 +-
drivers/usb/serial/quatech2.c | 35 +-
drivers/usb/serial/safe_serial.c | 51 +-
drivers/usb/serial/siemens_mpi.c | 47 -
drivers/usb/serial/spcp8x5.c | 4 +-
drivers/usb/serial/suunto.c | 41 -
drivers/usb/serial/ti_usb_3410_5052.c | 103 +-
drivers/usb/serial/usb-serial-simple.c | 110 +
drivers/usb/serial/usb-serial.c | 14 +-
drivers/usb/serial/vivopay-serial.c | 43 -
drivers/usb/serial/zio.c | 39 -
drivers/usb/storage/scsiglue.c | 16 +-
drivers/usb/usb-common.c | 49 +-
drivers/usb/usb-skeleton.c | 3 +-
drivers/usb/wusbcore/rh.c | 28 +-
drivers/usb/wusbcore/wa-hc.h | 15 +-
drivers/usb/wusbcore/wa-rpipe.c | 21 +
drivers/usb/wusbcore/wa-xfer.c | 139 +-
drivers/uwb/drp-ie.c | 4 +-
drivers/uwb/hwa-rc.c | 16 +-
drivers/uwb/pal.c | 40 +-
include/linux/device.h | 16 +-
include/linux/platform_data/tegra_usb.h | 32 -
include/linux/usb.h | 32 +-
include/linux/usb/chipidea.h | 7 +-
include/linux/usb/gadget.h | 4 +
include/linux/usb/hcd.h | 19 +-
include/linux/usb/of.h | 10 +-
include/linux/usb/phy.h | 18 +-
include/linux/usb/tegra_usb_phy.h | 40 +-
.../usb/{nop-usb-xceiv.h => usb_phy_gen_xceiv.h} | 4 +-
include/linux/usb/usbnet.h | 1 +
include/linux/usb/wusb-wa.h | 1 +
307 files changed, 14858 insertions(+), 7044 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-bus-usb
create mode 100644 Documentation/devicetree/bindings/usb/generic.txt
create mode 100644 Documentation/devicetree/bindings/usb/samsung-hsotg.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb-xhci.txt
create mode 100644 drivers/dma/cppi41.c
create mode 100644 drivers/usb/chipidea/otg.c
create mode 100644 drivers/usb/chipidea/otg.h
create mode 100644 drivers/usb/dwc3/platform_data.h
delete mode 100644 drivers/usb/gadget/imx_udc.c
delete mode 100644 drivers/usb/gadget/imx_udc.h
create mode 100644 drivers/usb/host/fotg210-hcd.c
create mode 100644 drivers/usb/host/fotg210.h
create mode 100644 drivers/usb/host/xhci-trace.c
create mode 100644 drivers/usb/host/xhci-trace.h
create mode 100644 drivers/usb/misc/ehset.c
create mode 100644 drivers/usb/musb/musb_am335x.c
create mode 100644 drivers/usb/musb/musb_cppi41.c
create mode 100644 drivers/usb/phy/am35x-phy-control.h
create mode 100644 drivers/usb/phy/phy-am335x-control.c
create mode 100644 drivers/usb/phy/phy-am335x.c
rename drivers/usb/phy/{phy-nop.c => phy-generic.c} (66%)
create mode 100644 drivers/usb/phy/phy-generic.h
delete mode 100644 drivers/usb/serial/flashloader.c
delete mode 100644 drivers/usb/serial/funsoft.c
delete mode 100644 drivers/usb/serial/hp4x.c
delete mode 100644 drivers/usb/serial/moto_modem.c
delete mode 100644 drivers/usb/serial/siemens_mpi.c
delete mode 100644 drivers/usb/serial/suunto.c
create mode 100644 drivers/usb/serial/usb-serial-simple.c
delete mode 100644 drivers/usb/serial/vivopay-serial.c
delete mode 100644 drivers/usb/serial/zio.c
delete mode 100644 include/linux/platform_data/tegra_usb.h
rename include/linux/usb/{nop-usb-xceiv.h => usb_phy_gen_xceiv.h} (81%)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
