Re: [alsa-devel] Buffer size for ALSA USB PCM audio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 29 Aug 2013, James Stone wrote:

> On Wed, Aug 28, 2013 at 7:46 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> > On Wed, 28 Aug 2013, Clemens Ladisch wrote:
> >
> >> Sorry, what I said applies more to explicit sync endpoints.  When using
> >> implicit sync, a playback URB is submitted for each completed capture
> >> URB, with the number of samples per packet identical to the
> >> corresponding capture packet, so the parameters must be identical.
> >
> > Got it.  Below is an updated patch.
> >
> > James, the problem you encountered was most likely a result of the
> > faulty treatment of capture endpoints that Clemens pointed out.  It was
> > quite obvious in the usbmon traces that the unpatched driver used 8
> > packets per URB whereas the patched driver used 22.  This updated patch
> > should fix that problem.
> >
> 
> Works fine. With this, it is possible to get clear playback at 64
> frames/period too. With vanilla 3.10.9, there was some glitchy
> distortion to the sound at that latency, so this seems to be an
> improvement.

That's good.  What happens if you push frames/period even lower?

Daniel and Eldad, more testing of the most recent proposed patch would
be welcome.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux