Re: [PATCH 1/2] extcon: extcon-dra7xx: Add extcon driver for USB ID detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephen,

On 8/20/2013 10:23 PM, Stephen Warren wrote:
>ID pins are connected to pcf8575, and the pcf8575's interrupt line is
>inturn connected to
>gpio bank6 pin 11, we use this gpio interrupt to detect the ID pin change.
In that case, the PCF8575 node needs to be a GPIO controller and an IRQ
controller, as does the driver for the PCF8575. This binding should have
a single entry in the gpios property, and the driver can call
gpio_to_irq() on that so it knows which IRQ to request.

You meant some thing like this?

       pcf_usb: pcf8575@21 {
                compatible = "ti,pcf8575";
                reg = <0x21>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-parent = <&gpio6>;
                interrupts = <11 2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };

	 usb_vid_gpio {
                compatible = "ti,dra7xx-usb";
                gpios = <&pcf_usb 1 0>;
};


--
-George

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux