On Tue, 2013-08-20 at 16:06 +0100, Pawel Moll wrote: > On Tue, 2013-08-20 at 16:01 +0100, Kumar Gala wrote: > > On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote: > > > > > > > > Hi, > > > > > > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote: > > >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote: > > >>> Hi, > > >>> > > >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote: > > >>>> Hi, > > >>>> > > >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote: > > >>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote: > > >>>>>>> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> > > >>>>>>> > > >>>>>>> These drivers handles control and configuration of the HS > > >>>>>>> and SS USB PHY transceivers. They are part of the driver > > >>>>>>> which manage Synopsys DesignWare USB3 controller stack > > >>>>>>> inside Qualcomm SoC's. > > >>>>>>> > > >>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx> > > >>>>>>> --- > > >>>>>>> drivers/usb/phy/Kconfig | 11 ++ > > >>>>>>> drivers/usb/phy/Makefile | 2 + > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c | 327 ++++++++++++++++++++++++++++++++ > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c | 374 +++++++++++++++++++++++++++++++++++++ > > >>>>>> > > >>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs > > >>>>>> don't care about the USB controller. > > >>>>> > > >>>>> I think they are SNPS DesignWare PHY's, additionally > > >>>>> wrapped with Qualcomm logic. I could substitute "dwc3" > > >>>>> with just "dw", which will be more correct. > > >>>> > > >>>> alright, thank you. Let's add Paul to the loop since he might have very > > >>>> good insight in the synopsys PHYs. > > >>>> > > >>>> mental note: if any other platform shows up with Synopsys PHY, ask them > > >>>> to use this driver instead :-) > > >>> > > >>> I really doubt that this will bi possible. Control of the PHY's is > > >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough > > >>> QSCRATCH registers, which of course is highly Qualcomm specific. > > >> > > >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of > > >> registers ? > > > > > > From what I see it is not directly mapped. How QSCRATCH write and > > > reads transactions are translated to DW IP is unclear to me. > > > > > > I think the question is how does SW access them? > > I afraid the answer may be: "it depends on the SOC". In my past I had to > initialize a (SATA) PHY by implementing a software JTAG state machine, > as the PHY's registers were not memory mapped *at all*. And the IP > itself came from Synopsys, Cadence or yet another EDA company... Having said all that... If the PHY's spec at least defined layout of the registers in question and driver was using regmap API to talk to the device (initially regmap-mmio), it has some chances to become universal. The SOCs designed like "my" one would have to provide a custom regmap implementation. Paweł -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
