On Fri, Aug 02, 2013 at 04:33:53PM +0800, Peter Chen wrote: > This patchset adds tested otg id switch function and vbus connect > and disconnect detection for chipidea driver. And fix kinds of > bugs found at chipidea drivers after enabling id and vbus detection. > > This patch are fully tested at imx6 sabresd and imx28evk platform by me. > Besides, marek tested it on two STMP3780-based boards (not yet mainline) > and two MX28-based boards. > > My chipidea repo: https://github.com/hzpeterchen/linux-usb.git > > Changes for v14: > - This patchset is based on below recent chipidea patches and newest > usb-next, it can decrease rebase effort. > > Fabio Estevam (3): > chipidea: ci_hdrc_imx: Remove unused variable 'res' > chipidea: core: Move hw_phymode_configure() into probe > chipidea: Remove previous MODULE_ALIAS > > Lothar Wabmann (3): > usb: chipidea: improve kconfig 2.0 > usb: chipidea: don't clobber return value of ci_role_start() > usb: chipidea: ci_hdrc_imx: remove an unsolicited module_put() call > from ci_hdrc_imx_remove() > > Peter Chen (1): > usb: chipidea: fix the build error with randconfig > > - [Michael comments]: move vbus operation to core, and squash two vbus > patches. [1/12], [2/12] > - [Michael comments]: move out non vbus and non id related patches. [14/14 at v13] Hi Alex, any comments? > > Chagnes for v13: > - Add Tested-by: Marek Vasut <marex@xxxxxxx> > - [Sascha's comments]: Add return value check for devm_regulator_get. [3/14] > - [Marc's comments]: Change timeout usage at hw_wait_reg. [11/14] > - [Alex's comments]: Using platdata flag to indicate dual role but not > OTG controller. [7/14] > > Changes for v12: > - Rebased greg's usb-next tree (3.10.0-rc7+) > - Split more small patches for single function and fix. > > Peter Chen (12): > usb: chipidea: move vbus regulator operation to core > usb: chipidea: host: add vbus regulator control > usb: chipidea: udc: otg_set_peripheral is useless for some chipidea > users > usb: chipidea: otg: Add otg file used to access otgsc > usb: chipidea: Add role init and destory APIs > usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG > usb: chipidea: disable all interrupts and clear all interrupts status > usb: chipidea: move otg relate things to otg file > usb: chipidea: add vbus interrupt handler > usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts > usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and > CI_HDRC_PULLUP_ON_VBUS > usb: chipidea: udc: .pullup is valid when vbus is on at > CI_HDRC_PULLUP_ON_VBUS > > drivers/usb/chipidea/Makefile | 2 +- > drivers/usb/chipidea/bits.h | 10 ++ > drivers/usb/chipidea/ci.h | 8 ++ > drivers/usb/chipidea/ci_hdrc_imx.c | 26 +----- > drivers/usb/chipidea/core.c | 184 +++++++++++++++++++++++++----------- > drivers/usb/chipidea/host.c | 30 ++++++- > drivers/usb/chipidea/host.h | 6 + > drivers/usb/chipidea/otg.c | 135 ++++++++++++++++++++++++++ > drivers/usb/chipidea/otg.h | 22 +++++ > drivers/usb/chipidea/udc.c | 59 +++++++++--- > drivers/usb/chipidea/udc.h | 6 + > include/linux/usb/chipidea.h | 6 + > 12 files changed, 401 insertions(+), 93 deletions(-) > create mode 100644 drivers/usb/chipidea/otg.c > create mode 100644 drivers/usb/chipidea/otg.h > -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
