On 8/2/2013 3:59 PM, Sebastian Andrzej Siewior wrote:
On 08/01/2013 01:30 PM, Sebastian Andrzej Siewior wrote:
On 08/01/2013 12:52 PM, Sebastian Andrzej Siewior wrote:
On 08/01/2013 07:24 AM, George Cherian wrote:
b/arch/arm/boot/dts/am33xx.dtsi
index 38b446b..0f756ca 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -333,21 +337,85 @@
status = "disabled";
};
- usb@47400000 {
- compatible = "ti,musb-am33xx";
- reg = <0x47400000 0x1000 /* usbss */
- 0x47401000 0x800 /* musb instance 0 */
- 0x47401800 0x800>; /* musb instance 1 */
- interrupts = <17 /* usbss */
- 18 /* musb instance 0 */
- 19>; /* musb instance 1 */
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- port0-mode = <3>;
- port1-mode = <3>;
- power = <250>;
+ usb: usb@47400000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
ti,hwmods = "usb_otg_hs";
+ status = "disabled";
+
+ ctrl_mod: control@44e10000 {
+ compatible = "ti,am335x-ctrl-module";
+ reg = <0x44e10000 0x650>;
Do you really need to map Control Module base to 0x650? If some other
driver does this mapping
This is what I cam currently not sure about. Either we minimize the
register window and introduce two (the other wakeup) or we keep using
the same reset driver for other devices.
I mean drivers/reset or something like that.
If there are no further comments / preferences on this I'm going to
shrink to registers and make usb only.
Yes, USB only makes sense for now.
Sebastian
--
-George
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
