On 07/19/2013 08:33 PM, Sergei Shtylyov wrote:
> Hello.
Hello,
>> usb: usb@47400000 {
>> compatible = "ti,am33xx-usb";
>>
>> usb0_phy: phy@47401300 {
>> compatible = "ti,am335x-usb-phy";
>> }
>> usb0: usb@47401000 {
>> musb0: usb@47401400 {
>> compatible = "mg,musbmhdrc";
>> }
>> }
>> usb1_phy: phy@47402300 {
>> compatible = "ti,am335x-usb-phy";
>> }
>> usb1: usb@47402000 {
>> musb1: usb@47402400 {
>> compatible = "mg,musbmhdrc";
>> }
>> }
>> }
>
>> And you want usb0_phy to be child of usb0? In the TRM they are all in
>> the same block.
>
> Ah, the fact that PHYs didn't have the "reg" property got me muddled,
> I didn't pay attention to the address part of the node names... BTW,
> where is the "reg" prop?
I skipped it for the general idea. I planned to repost is today but I
messed up dsps and need to get it working first…
> I see PHYs share the address space with
> "omap-control-usb@44e10620" device -- what's the point with this?
I decided to get rid of this. Both phys have 8 bytes (2 registers)
which are exclusive for them.
There is one register for the wakeup which is shared by both.
I changed this to limit it only to the 8bytes per phy. I care about
wakeup later - hopefully George will take care of this :)
>
>> Sebastian
>
> WBR, Sergei
>
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
