When dma is disabled inside dwc2 (because the hardware does not support it, or the code was changed to disable it for testing), let the usb core know about this by clearing hcd->self.uses_dma. By default, the usb core assumes that dma is used when a dma_mask is set, but this might not always match the dma_enable value in dwc2. To prevent problems resulting from a mismatch, better to explicitely disable dma in this case (though everything seemed to work with the wrong value of uses_dma as well, probably only resulted in some unneeded work). Signed-off-by: Matthijs Kooijman <matthijs@xxxxxxxx> Acked-by: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx> --- drivers/staging/dwc2/hcd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c index b5b229a..50a379d 100644 --- a/drivers/staging/dwc2/hcd.c +++ b/drivers/staging/dwc2/hcd.c @@ -2826,6 +2826,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, if (!hcd) goto error1; + if (hsotg->core_params->dma_enable <= 0) + hcd->self.uses_dma = 0; + hcd->has_tt = 1; spin_lock_init(&hsotg->lock); -- 1.8.3.rc1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
