We no longer need to model a RESET line as a regulator since we have the reset-gpio driver available. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++--------- 1 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index dfd8310..01fbad6 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -45,14 +45,12 @@ }; /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 19 0>; /* gpio_147 */ - startup-delay-us = <70000>; - enable-active-high; + hsusb2_reset: hsusb2_reset { + compatible = "gpio-reset"; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + reset-delay-us = <70000>; + initially-in-reset; + #reset-cells = <0>; }; /* HS USB Port 2 Power */ @@ -68,7 +66,8 @@ /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + resets = <&hsusb2_reset>; + reset-names = "reset"; vcc-supply = <&hsusb2_power>; }; -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html