Thank you Felipe [add CC Giancarlo from ST] On Tuesday 16 July 2013 15:04:25 Felipe Balbi wrote: > Hi, > > On Tue, Jul 16, 2013 at 02:01:33PM +0200, Federico Vaga wrote: > > Hello, > > > > I have an x86 board made by STMicroelectronics (STA2X11) with the Synopsis > > USB-OTG DesignWare 2 on it and connected through the PCI-e bus. > > > > I know that there are two drivers for the same controller: > > (host) drivers/staging/dwc2/* > > (device) drivers/usb/gadget/s3c-hsotg.{c|h} > > > > So, at the moment I cannot have a board with both host/device working at > > the same time. I have to choose to use the block as device or host, > > right? > > > > I know that the plan is to merge the s3c-hsotg in the dwc2 driver > > (https://lwn.net/Articles/540283/). Are still accepted patch to s3c-hsotg? > > Or it is work in progress right now (soon), so it is better to wait after > > the merge? > > > > In order to use the s3c-hsotg I must implement a PCI wrapper that uses > > this > > driver. It will be accepted in the kernel even if it will be removed > > sooner or later because of the driver merge? > > currently s3c-hsotg has too much knowledge of the Samsung platform. My > suggestion would be to help dwc2 get in better shape. It should be > rather easy to support your board since that already has a PCI wrapper > driver. > > So, stick to host only for now, help clean up dwc2 and move it out of > staging, then later it should be fairly simple to merge the device side > in it. Is there something like a TODO list of dwc2 known problems? -- Federico Vaga -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html