On Fri, 28 Jun 2013, Roger Quadros wrote: > Just found the problem. It seems that enabling the ehci_irq _after_ the root hub is resumed > is the root cause of the problem. Doing so will miss events from the root hub. This sounds like a bug in the IRQ setup. It's the sort of thing you see when a level-triggered IRQ is treated as though it were edge-triggered. In any case, the wakeup should have worked whether the IRQ was issued or not. > The following modification worked for me without any delays. > > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c > index 72df4eb..b3af1aa 100644 > --- a/drivers/usb/core/hcd.c > +++ b/drivers/usb/core/hcd.c > @@ -2136,11 +2136,6 @@ static void hcd_resume_work(struct work_struct *work) > usb_lock_device(udev); > usb_remote_wakeup(udev); > usb_unlock_device(udev); > - if (HCD_IRQ_DISABLED(hcd)) { > - /* Interrupt was disabled */ > - clear_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); > - enable_irq(hcd->irq); > - } > } > > /** > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > index 593d28d..f2a1a46 100644 > --- a/drivers/usb/host/ehci-hcd.c > +++ b/drivers/usb/host/ehci-hcd.c > @@ -1110,6 +1110,12 @@ int ehci_resume(struct usb_hcd *hcd, bool hibernated) > { > struct ehci_hcd *ehci = hcd_to_ehci(hcd); > > + if (HCD_IRQ_DISABLED(hcd)) { > + /* Interrupt was disabled */ > + clear_bit(HCD_FLAG_IRQ_DISABLED, &hcd->flags); > + enable_irq(hcd->irq); > + } > + > if (time_before(jiffies, ehci->next_statechange)) > msleep(100); I appreciate the symmetry of putting the enable_irq call in ehci-hcd, seeing as how the disable_irq is there too. On the other hand, every HCD using this mechanism is going to have to do the same thing, which argues for putting the enable call in the core. Perhaps at the start of hcd_resume_work() instead of the end. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html