On Thu, 27 Jun 2013, Manjunath Goudar wrote: > Separate the W90X900(W90P910) on-chip host controller driver from > ehci-hcd host code so that it can be built as a separate driver module. > This work is part of enabling multi-platform kernels on ARM; > however, note that other changes are still needed before W90X900(W90P910) > can be booted with a multi-platform kernel > > and an ehci driver that only works on one of them. > > With the infrastructure added by Alan Stern in patch 3e0232039 > "USB: EHCI: prepare to make ehci-hcd a library module", we can > avoid this problem by turning a bus glue into a separate > module, as we do here for the w90X900 bus glue. > diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c > index 59e0e24..d9ecd79 100644 > --- a/drivers/usb/host/ehci-w90x900.c > +++ b/drivers/usb/host/ehci-w90x900.c > @@ -11,13 +11,28 @@ > * > */ > > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/usb.h> > +#include <linux/usb/hcd.h> > +#include <linux/dma-mapping.h> > +#include <linux/of.h> Alphabetical order, please. > #include <linux/platform_device.h> > > +#include "ehci.h" > + > /* enable phy0 and phy1 for w90p910 */ > #define ENPHY (0x01<<8) > #define PHY0_CTR (0xA4) > #define PHY1_CTR (0xA8) > > +#define DRIVER_DESC "w90p910 usb ehci driver!" I know this is what it said originally, but let's make it look more like the other drivers. It doesn't need to say "usb", and it doesn't need the '!' character at the end. Also, 'ehci' should be in capital letters. Finally, shouldn't it say "w90x900" instead of "w90p910"? The rest of the patch is okay. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
