Remove the vendor and product module parameters which were added a long
time ago when we did not have the dynamic sysfs interface to add
new device ids (and which isn't limited to five new vid/pid pair).
A vid/pid pair can be added dynamically using sysfs, for example:
echo 0451 1234 >/sys/bus/usb-serial/drivers/ti_usb_3410_5052_1/new_id
for 1-port adapters, or
echo 0451 1234 >/sys/bus/usb-serial/drivers/ti_usb_3410_5052_2/new_id
for 2-port adapters.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/ti_usb_3410_5052.c | 72 ++++-------------------------------
1 file changed, 7 insertions(+), 65 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index f3e21f5..5585b20 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -141,20 +141,9 @@ static int ti_download_firmware(struct ti_device *tdev);
/* module parameters */
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
-static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
-static unsigned int vendor_3410_count;
-static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
-static unsigned int product_3410_count;
-static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
-static unsigned int vendor_5052_count;
-static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
-static unsigned int product_5052_count;
/* supported devices */
-/* the array dimension is the number of default entries plus */
-/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
-/* null entry */
-static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -171,16 +160,18 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+ { } /* terminator */
};
-static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_5052[] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+ { } /* terminator */
};
-static struct usb_device_id ti_id_table_combined[19+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -200,7 +191,7 @@ static struct usb_device_id ti_id_table_combined[19+2*TI_EXTRA_VID_PID_COUNT+1]
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
- { }
+ { } /* terminator */
};
static struct usb_serial_driver ti_1port_device = {
@@ -289,61 +280,12 @@ module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
"Maximum wait for data to drain in close, in .01 secs, default is 4000");
-module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_3410,
- "Vendor ids for 3410 based devices, 1-5 short integers");
-module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
-MODULE_PARM_DESC(product_3410,
- "Product ids for 3410 based devices, 1-5 short integers");
-module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_5052,
- "Vendor ids for 5052 based devices, 1-5 short integers");
-module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
-MODULE_PARM_DESC(product_5052,
- "Product ids for 5052 based devices, 1-5 short integers");
-
MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
+module_usb_serial_driver(serial_drivers, ti_id_table_combined);
/* Functions */
-static int __init ti_init(void)
-{
- int i, j, c;
-
- /* insert extra vendor and product ids */
- c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
- j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
- ti_id_table_3410[j].idVendor = vendor_3410[i];
- ti_id_table_3410[j].idProduct = product_3410[i];
- ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
- ti_id_table_combined[c].idVendor = vendor_3410[i];
- ti_id_table_combined[c].idProduct = product_3410[i];
- ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
- }
- j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
- ti_id_table_5052[j].idVendor = vendor_5052[i];
- ti_id_table_5052[j].idProduct = product_5052[i];
- ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
- ti_id_table_combined[c].idVendor = vendor_5052[i];
- ti_id_table_combined[c].idProduct = product_5052[i];
- ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
- }
-
- return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined);
-}
-
-static void __exit ti_exit(void)
-{
- usb_serial_deregister_drivers(serial_drivers);
-}
-
-module_init(ti_init);
-module_exit(ti_exit);
-
-
static int ti_startup(struct usb_serial *serial)
{
struct ti_device *tdev;
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
