Suspend scenario in case of ohci-spear glue was not
properly handled as it was not suspending generic part
of ohci controller. Calling explicitly the ohci_suspend()
routine in spear_ohci_hcd_drv_suspend() will ensure proper
handling of suspend scenario.
Signed-off-by: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
V2:
-Incase ohci_suspend() fails, return right away without
executing further.
V3:
-Aligned variable "do_wakeup" and "ret".
V4:
-The do_wakeup and ret variable alignment is removed.
---
drivers/usb/host/ohci-spear.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 31ff3fc..41148f8 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -130,20 +130,26 @@ static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
}
#if defined(CONFIG_PM)
-static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
+static int spear_ohci_hcd_drv_suspend(struct platform_device *pdev,
pm_message_t message)
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct spear_ohci *sohci_p = to_spear_ohci(hcd);
+ bool do_wakeup = device_may_wakeup(&pdev->dev);
+ int ret;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup);
+ if (ret)
+ return ret;
+
clk_disable_unprepare(sohci_p->clk);
- return 0;
+ return ret;
}
static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
