Michael Grzeschik <mgr@xxxxxxxxxxxxxx> writes:
> From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
>
> This patch makes it possible to set the chipidea udc
> into full-speed only mode. It can be set by the oftree
> property "force-full-speed".
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/ci13xxx-imx.txt | 2 ++
> drivers/usb/chipidea/bits.h | 2 ++
> drivers/usb/chipidea/core.c | 6 ++++++
> 3 files changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index b4b5b79..1943aef 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -18,6 +18,7 @@ Optional properties:
> - vbus-supply: regulator for vbus
> - disable-over-current: disable over current detect
> - external-vbus-divider: enables off-chip resistor divider for Vbus
> +- force-full-speed: limit the maximum connection speed to full-speed
>
> Examples:
> usb@02184000 { /* USB OTG */
> @@ -28,4 +29,5 @@ usb@02184000 { /* USB OTG */
> fsl,usbmisc = <&usbmisc 0>;
> disable-over-current;
> external-vbus-divider;
> + force-full-speed;
> };
> diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> index 93efe4e..4c14ab7 100644
> --- a/drivers/usb/chipidea/bits.h
> +++ b/drivers/usb/chipidea/bits.h
> @@ -49,11 +49,13 @@
> #define PORTSC_HSP BIT(9)
> #define PORTSC_PTC (0x0FUL << 16)
> /* PTS and PTW for non lpm version only */
> +#define PORTSC_PFSC BIT(24)
> #define PORTSC_PTS(d) ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
> #define PORTSC_PTW BIT(28)
> #define PORTSC_STS BIT(29)
>
> /* DEVLC */
> +#define DEVLC_PFSC BIT(23)
> #define DEVLC_PSPD (0x03UL << 25)
> #define DEVLC_PSPD_HS (0x02UL << 25)
> #define DEVLC_PTW BIT(27)
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index ae239c7..b70b1d0 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -65,6 +65,7 @@
> #include <linux/usb/otg.h>
> #include <linux/usb/chipidea.h>
> #include <linux/usb/of.h>
> +#include <linux/of_device.h>
> #include <linux/phy.h>
>
> #include "ci.h"
> @@ -240,6 +241,11 @@ static void hw_phymode_configure(struct ci13xxx *ci)
> return;
> }
>
> + if (of_find_property(ci->dev->of_node, "force-full-speed", NULL)) {
Breaks compilation on x86, because of_device.h only includes of.h (which
declares of_find_property()) under #ifdef CONFIG_OF_DEVICE. A *nasty*
interface you've got yourselves there.
Regards,
--
Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
