From: Dan Williams <dcbw@xxxxxxxxxx> Date: Mon, 06 May 2013 16:34:56 -0500 > The driver and firmware sync up through SYNC messages, and the > firmware's affirmative reply to these SYNC messages appears to be the > "Reset" indication received via the status interrupt endpoint. Thus the > driver needs the status interrupt endpoint always active so that the > Reset indication can be received even if the netdev is closed, which is > the case right after device insertion. > > If the Reset indication is not received by the driver, it continues > sending SYNC messages to the firmware, which crashes about 10 seconds > later and the device stops responding. > > Signed-off-by: Dan Williams <dcbw@xxxxxxxxxx> Applied. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
