The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the omap1 defconfig, avoiding these build warnings: warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG) Also fix a Makefile typo while we're at it. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Cc: linux-usb@xxxxxxxxxxxxxxx Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Felipe Balbi <balbi@xxxxxx> --- arch/arm/configs/omap1_defconfig | 1 + drivers/usb/gadget/Kconfig | 1 + drivers/usb/phy/Makefile | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 2280d9d..a1ee534 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -196,6 +196,7 @@ CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index f85b427..83300d9 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -196,6 +196,7 @@ config USB_FUSB300 config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 + depends on USB_PHY select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG help Many Texas Instruments OMAP processors have flexible full diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 33863c0..a9169cb 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_USB_PHY) += phy.o obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o -obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301.omap.o +obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
