Re: linux-next: Tree for Apr 24 [ PM: Device 1-1.2 failed to resume async: error -32 ]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 24, 2013 at 10:07 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> Hi all,
>
> There will be no linux-next release tomorrow (April 25).
>
> Changes since 20130423:
>
> The net-next tree lost its build failure.
>
> The staging tree gained a build failure for which I disabled a driver.
>
> The arm-soc tree gained a conflict against the pm tree.
>
> ----------------------------------------------------------------------------
>

[ CC linux-pm and linux-usb (ehci) folks ]

This happens with my external USB mouse after suspend/resume.

Excerpt (full dmesg and kernel-config attached):

$ dmesg | egrep -i 'usb|async' | grep 1-1.2
[    1.258602] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.368649] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.368661] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    1.368668] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.368672] usb 1-1.2: Manufacturer: Logitech
[    1.957999] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[   62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[   62.636893] PM: Device 1-1.2 failed to resume async: error -32
[   64.243543] usb 1-1.2: USB disconnect, device number 3
[   64.380328] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
[   64.477612] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[   64.477618] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[   64.477621] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[   64.477623] usb 1-1.2: Manufacturer: Logitech
[   64.481934] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11

Any help/hints/infos welcome :-)!

Regards,
- Sedat .-
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc8-next20130424-2-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Apr 24 21:26:42 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130424-2-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[    0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[    0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x02032000, 0x02032fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86656 r8192 d23936 u262144
[    0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130424-2-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938728k/4716544k available (6999k kernel code, 630544k absent, 147272k reserved, 6305k data, 1316k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.379 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.75 BogoMIPS (lpj=6385516)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000140] Security Framework initialized
[    0.000152] AppArmor: AppArmor initialized
[    0.000154] Yama: becoming mindful.
[    0.000541] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001603] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002070] Mount-cache hash table entries: 256
[    0.002584] Initializing cgroup subsys memory
[    0.002649] Initializing cgroup subsys devices
[    0.002653] Initializing cgroup subsys freezer
[    0.002657] Initializing cgroup subsys blkio
[    0.002660] Initializing cgroup subsys perf_event
[    0.002665] Initializing cgroup subsys hugetlb
[    0.002746] Disabled fast string operations
[    0.002750] CPU: Physical Processor ID: 0
[    0.002753] CPU: Processor Core ID: 0
[    0.002759] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002759] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002767] mce: CPU supports 7 MCE banks
[    0.002785] CPU0: Thermal monitoring enabled (TM1)
[    0.002795] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002795] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002795] tlb_flushall_shift: 5
[    0.002888] Freeing SMP alternatives: 24k freed
[    0.003881] ACPI: Core revision 20130328
[    0.014645] ACPI: All ACPI Tables successfully acquired
[    0.016191] ftrace: allocating 26454 entries in 104 pages
[    0.031234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070895] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.070907] TSC deadline timer enabled
[    0.070920] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.070932] ... version:                3
[    0.070935] ... bit width:              48
[    0.070937] ... generic registers:      4
[    0.070939] ... value mask:             0000ffffffffffff
[    0.070942] ... max period:             000000007fffffff
[    0.070945] ... fixed-purpose events:   3
[    0.070947] ... event mask:             000000070000000f
[    0.083903] Disabled fast string operations
[    0.087080] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098521] Disabled fast string operations
[    0.112178] Disabled fast string operations
[    0.072970] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.114311] Brought up 4 CPUs
[    0.114319] smpboot: Total of 4 processors activated (12771.03 BogoMIPS)
[    0.118333] devtmpfs: initialized
[    0.120316] EVM: security.selinux
[    0.120320] EVM: security.SMACK64
[    0.120322] EVM: security.capability
[    0.120408] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.121886] regulator-dummy: no parameters
[    0.122038] NET: Registered protocol family 16
[    0.122387] ACPI: bus type PCI registered
[    0.122504] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122510] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129282] PCI: Using configuration type 1 for base access
[    0.132585] bio: create slab <bio-0> at 0
[    0.132987] ACPI: Added _OSI(Module Device)
[    0.132991] ACPI: Added _OSI(Processor Device)
[    0.132995] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.132998] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134777] ACPI: EC: Look up EC in DSDT
[    0.162382] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168322] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.179812] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.180320] ACPI: Dynamic OEM Table Load:
[    0.180324] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.190797] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.191382] ACPI: Dynamic OEM Table Load:
[    0.191386] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.202490] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.202963] ACPI: Dynamic OEM Table Load:
[    0.202967] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.216791] ACPI: Interpreter enabled
[    0.216808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.216833] ACPI: (supports S0 S1 S3 S4 S5)
[    0.216836] ACPI: Using IOAPIC for interrupt routing
[    0.216893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.240503] ACPI: Power Resource [FN00] (off)
[    0.240689] ACPI: Power Resource [FN01] (off)
[    0.240875] ACPI: Power Resource [FN02] (off)
[    0.241055] ACPI: Power Resource [FN03] (off)
[    0.241239] ACPI: Power Resource [FN04] (off)
[    0.242335] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.242678] \_SB_.PCI0:_OSC invalid UUID
[    0.242680] _OSC request data:1 8 0 
[    0.243660] PCI host bridge to bus 0000:00
[    0.243666] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.243670] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.243674] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.243678] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.243682] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.243685] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.243703] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.243864] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.243878] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.243885] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.243890] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.244077] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.244105] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.244191] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.244352] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.244376] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.244476] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.244583] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.244602] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.244681] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.244726] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.244796] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.244888] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.244937] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.245010] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.245098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.245156] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.245229] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.245359] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.245494] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.245518] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.245618] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.245720] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.245921] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.245943] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.245953] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.245963] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.245974] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.245983] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.245993] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.246050] pci 0000:00:1f.2: PME# supported from D3hot
[    0.246171] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.246190] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.246214] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.246596] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.246777] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.247510] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.247680] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.254456] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.254466] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.254642] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.254713] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.254836] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.254912] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.255249] pci 0000:02:00.0: supports D1 D2
[    0.255251] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.255373] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.262373] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.262388] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.262410] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.262608] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.262646] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.262846] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.270367] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.270386] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.270581] \_SB_.PCI0:_OSC invalid UUID
[    0.270583] _OSC request data:1 1f 0 
[    0.270587] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.270592] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.271474] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.271593] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.271710] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.271824] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.271939] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.272054] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272170] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.272284] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.272923] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.272933] acpi root: \_SB_.PCI0 notify handler is installed
[    0.272997] Found 1 acpi root devices
[    0.273063] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.273272] ACPI: No dock devices found.
[    0.273475] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.273482] vgaarb: loaded
[    0.273484] vgaarb: bridge control possible 0000:00:02.0
[    0.274159] SCSI subsystem initialized
[    0.274163] ACPI: bus type ATA registered
[    0.274278] libata version 3.00 loaded.
[    0.274343] ACPI: bus type USB registered
[    0.274393] usbcore: registered new interface driver usbfs
[    0.274419] usbcore: registered new interface driver hub
[    0.274474] usbcore: registered new device driver usb
[    0.274791] PCI: Using ACPI for IRQ routing
[    0.276469] PCI: pci_cache_line_size set to 64 bytes
[    0.276579] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.276582] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.276584] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.276586] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.276865] NetLabel: Initializing
[    0.276868] NetLabel:  domain hash size = 128
[    0.276871] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.276920] NetLabel:  unlabeled traffic allowed by default
[    0.277005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.277015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.279030] Switching to clocksource hpet
[    0.296136] AppArmor: AppArmor Filesystem Enabled
[    0.296195] pnp: PnP ACPI init
[    0.296213] ACPI: bus type PNP registered
[    0.296641] pnp 00:00: [dma 4]
[    0.296685] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.296728] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.296895] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.296949] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.297025] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.297031] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.297035] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.297039] system 00:04: [io  0xffff] has been reserved
[    0.297043] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.297047] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.297051] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.297055] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.297059] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.297064] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.297069] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297117] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.297210] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.297216] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.297274] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.297364] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.297675] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297680] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.297684] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.297689] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.297693] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.297697] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.297701] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.297706] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.297710] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.297715] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.297720] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.298350] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.298389] pnp: PnP ACPI: found 11 devices
[    0.298392] ACPI: bus type PNP unregistered
[    0.305956] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.305965] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.305978] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.305983] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.305994] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.306004] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.306011] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.306447] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.306450] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.306452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.306454] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.306456] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.306458] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.306460] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.306462] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.306464] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.306583] NET: Registered protocol family 2
[    0.306925] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.307118] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.307402] TCP: Hash tables configured (established 32768 bind 32768)
[    0.307663] TCP: reno registered
[    0.307683] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.307750] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.307993] NET: Registered protocol family 1
[    0.308015] pci 0000:00:02.0: Boot video device
[    0.308781] PCI: CLS 64 bytes, default 64
[    0.308993] Trying to unpack rootfs image as initramfs...
[    0.380435] Freeing initrd memory: 3204k freed
[    0.381119] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.381128] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.381464] Scanning for low memory corruption every 60 seconds
[    0.381835] Initialise module verification
[    0.381901] audit: initializing netlink socket (disabled)
[    0.381921] type=2000 audit(1366839907.376:1): initialized
[    0.411369] bounce pool size: 64 pages
[    0.411397] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.412016] VFS: Disk quotas dquot_6.5.2
[    0.412060] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.412776] fuse init (API version 7.21)
[    0.412872] msgmni has been set to 7699
[    0.413422] Key type asymmetric registered
[    0.413426] Asymmetric key parser 'x509' registered
[    0.413476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.413530] io scheduler noop registered
[    0.413534] io scheduler deadline registered (default)
[    0.413566] io scheduler cfq registered
[    0.413959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.414004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.414096] intel_idle: MWAIT substates: 0x21120
[    0.414098] intel_idle: v0.4 model 0x2A
[    0.414099] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.414572] ACPI: AC Adapter [ADP1] (on-line)
[    0.414903] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.415046] ACPI: Lid Switch [LID0]
[    0.415115] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.415123] ACPI: Power Button [PWRB]
[    0.415187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.415193] ACPI: Power Button [PWRF]
[    0.415292] ACPI: Fan [FAN0] (off)
[    0.415345] ACPI: Fan [FAN1] (off)
[    0.415398] ACPI: Fan [FAN2] (off)
[    0.415450] ACPI: Fan [FAN3] (off)
[    0.415505] ACPI: Fan [FAN4] (off)
[    0.415600] ACPI: Requesting acpi_cpufreq
[    0.422736] thermal LNXTHERM:00: registered as thermal_zone0
[    0.422742] ACPI: Thermal Zone [TZ00] (62 C)
[    0.423178] thermal LNXTHERM:01: registered as thermal_zone1
[    0.423182] ACPI: Thermal Zone [TZ01] (30 C)
[    0.423246] GHES: HEST is not enabled!
[    0.423453] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.428031] ACPI: Battery Slot [BAT1] (battery present)
[    0.428045] Linux agpgart interface v0.103
[    0.430465] brd: module loaded
[    0.431691] loop: module loaded
[    0.431917] mei_me 0000:00:16.0: setting latency timer to 64
[    0.431981] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.435056] ahci 0000:00:1f.2: version 3.0
[    0.435241] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.435445] ahci: SSS flag set, parallel bus scan disabled
[    0.450958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.450965] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.450973] ahci 0000:00:1f.2: setting latency timer to 64
[    0.475735] scsi0 : ahci
[    0.475894] scsi1 : ahci
[    0.476004] scsi2 : ahci
[    0.476116] scsi3 : ahci
[    0.476226] scsi4 : ahci
[    0.476384] scsi5 : ahci
[    0.476458] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.476464] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.476467] ata3: DUMMY
[    0.476471] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.476476] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.476480] ata6: DUMMY
[    0.477390] libphy: Fixed MDIO Bus: probed
[    0.477654] tun: Universal TUN/TAP device driver, 1.6
[    0.477657] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.477730] PPP generic driver version 2.4.2
[    0.477843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.477847] ehci-pci: EHCI PCI platform driver
[    0.478028] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.478038] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.478050] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.478071] ehci-pci 0000:00:1a.0: debug port 2
[    0.481981] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.482027] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.490905] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.490951] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.490956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.490960] usb usb1: Product: EHCI Host Controller
[    0.490963] usb usb1: Manufacturer: Linux 3.9.0-rc8-next20130424-2-iniza-small ehci_hcd
[    0.490967] usb usb1: SerialNumber: 0000:00:1a.0
[    0.491124] hub 1-0:1.0: USB hub found
[    0.491133] hub 1-0:1.0: 2 ports detected
[    0.491411] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.491418] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.491427] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.491447] ehci-pci 0000:00:1d.0: debug port 2
[    0.495368] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.495413] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.506896] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.506936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.506940] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.506944] usb usb2: Product: EHCI Host Controller
[    0.506947] usb usb2: Manufacturer: Linux 3.9.0-rc8-next20130424-2-iniza-small ehci_hcd
[    0.506951] usb usb2: SerialNumber: 0000:00:1d.0
[    0.507099] hub 2-0:1.0: USB hub found
[    0.507107] hub 2-0:1.0: 2 ports detected
[    0.507236] ehci-platform: EHCI generic platform driver
[    0.507255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.507293] uhci_hcd: USB Universal Host Controller Interface driver
[    0.507421] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.507430] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.517212] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.517219] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.517226] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.517235] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.517242] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.517523] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.517527] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.517531] usb usb3: Product: xHCI Host Controller
[    0.517535] usb usb3: Manufacturer: Linux 3.9.0-rc8-next20130424-2-iniza-small xhci_hcd
[    0.517539] usb usb3: SerialNumber: 0000:03:00.0
[    0.517642] xHCI xhci_add_endpoint called for root hub
[    0.517644] xHCI xhci_check_bandwidth called for root hub
[    0.517679] hub 3-0:1.0: USB hub found
[    0.517694] hub 3-0:1.0: 2 ports detected
[    0.517801] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.517808] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.517872] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.517875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.517879] usb usb4: Product: xHCI Host Controller
[    0.517883] usb usb4: Manufacturer: Linux 3.9.0-rc8-next20130424-2-iniza-small xhci_hcd
[    0.517887] usb usb4: SerialNumber: 0000:03:00.0
[    0.517985] xHCI xhci_add_endpoint called for root hub
[    0.517986] xHCI xhci_check_bandwidth called for root hub
[    0.518022] hub 4-0:1.0: USB hub found
[    0.518034] hub 4-0:1.0: 2 ports detected
[    0.534946] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.542103] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.542111] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.542323] mousedev: PS/2 mouse device common for all mice
[    0.542764] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.542800] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.542866] device-mapper: uevent: version 1.0.3
[    0.542943] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx
[    0.542953] Intel P-state driver initializing.
[    0.550208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.570856] Intel pstate controlling: cpu 0
[    0.570884] Intel pstate controlling: cpu 1
[    0.570908] Intel pstate controlling: cpu 2
[    0.570929] Intel pstate controlling: cpu 3
[    0.571166] cpuidle: using governor ladder
[    0.571174] ledtrig-cpu: registered to indicate activity on CPUs
[    0.571178] EFI Variables Facility v0.08 2004-May-17
[    0.571377] ashmem: initialized
[    0.571528] TCP: cubic registered
[    0.571622] NET: Registered protocol family 10
[    0.572118] NET: Registered protocol family 17
[    0.572139] Key type dns_resolver registered
[    0.572623] PM: Hibernation image not present or could not be loaded.
[    0.572626] Loading module verification certificates
[    0.573975] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f865458f152a8f151e5b909da4d790a110354bf2'
[    0.574011] registered taskstats version 1
[    0.577493] Key type trusted registered
[    0.582903] Key type encrypted registered
[    0.591597] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.591603] EDD information not available.
[    0.794813] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.795965] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.795978] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.797033] ata1.00: configured for UDMA/133
[    0.797450] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.797840] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.797849] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.797878] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.797995] sd 0:0:0:0: [sda] Write Protect is off
[    0.798003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.798063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.802734] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.807942]  sda: sda1 sda2 sda3
[    0.808856] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.935092] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.935106] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.935608] hub 1-1:1.0: USB hub found
[    0.935781] hub 1-1:1.0: 6 ports detected
[    1.050575] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.110587] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.111366] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.111389] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.112083] ata2.00: configured for UDMA/133
[    1.112567] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.113008] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.113041] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.113295] sd 1:0:0:0: [sdb] Write Protect is off
[    1.113313] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.113498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.114780]  sdb: sdb1 sdb2
[    1.115230] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.183272] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.183289] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.183799] hub 2-1:1.0: USB hub found
[    1.183954] hub 2-1:1.0: 6 ports detected
[    1.258602] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.368649] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.368661] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.368668] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.368672] usb 1-1.2: Manufacturer: Logitech
[    1.378348] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.378358] Switching to clocksource tsc
[    1.430351] ata4: SATA link down (SStatus 0 SControl 300)
[    1.442465] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.706555] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.706568] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.706576] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.706581] usb 1-1.4: Manufacturer: 123
[    1.750085] ata5: SATA link down (SStatus 0 SControl 300)
[    1.752140] Freeing unused kernel memory: 1316k freed
[    1.752417] Write protecting the kernel read-only data: 12288k
[    1.756228] Freeing unused kernel memory: 1180k freed
[    1.759137] Freeing unused kernel memory: 1048k freed
[    1.782120] udevd[121]: starting version 175
[    1.904236] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.904643] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.905138] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.905146] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.915558] hidraw: raw HID events driver (C) Jiri Kosina
[    1.921952] usbcore: registered new interface driver usbhid
[    1.921969] usbhid: USB HID core driver
[    1.950031] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.957999] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.958354] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.046912] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.046930] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.736941] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   24.057057] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   24.089703] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   24.117728] udevd[588]: starting version 175
[   24.245369] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   24.245380] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.245386] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.245391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.245394] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.245399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.245401] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.245406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.245407] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.363192] lp: driver loaded but no devices found
[   24.590613] wmi: Mapper loaded
[   24.693070] cfg80211: Calling CRDA to update world regulatory domain
[   24.709507] samsung_laptop: detected SABI interface: SwSmi@
[   24.709511] samsung_laptop: Backlight controlled by ACPI video driver
[   24.777070] Bluetooth: Core ver 2.16
[   24.777168] NET: Registered protocol family 31
[   24.777172] Bluetooth: HCI device and connection manager initialized
[   24.777303] Bluetooth: HCI socket layer initialized
[   24.777318] Bluetooth: L2CAP socket layer initialized
[   24.777345] Bluetooth: SCO socket layer initialized
[   24.879672] cfg80211: World regulatory domain updated:
[   24.879678] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.879682] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.879686] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.879689] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.879692] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.879695] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.944242] [drm] Initialized drm 1.1.0 20060810
[   24.986405] usbcore: registered new interface driver btusb
[   24.988102] Linux video capture interface: v2.00
[   25.149237] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   25.220364] ppdev: user-space parallel port driver
[   25.420470] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.420477] Bluetooth: BNEP filters: protocol multicast
[   25.420500] Bluetooth: BNEP socket layer initialized
[   25.505879] Bluetooth: RFCOMM TTY layer initialized
[   25.505900] Bluetooth: RFCOMM socket layer initialized
[   25.505902] Bluetooth: RFCOMM ver 1.11
[   25.582567] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   25.585129] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   25.587900] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   25.590315] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[   25.700908] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   25.700913] Copyright(c) 2003-2013 Intel Corporation
[   25.701331] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   25.702060] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   25.887663] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   25.902781] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   25.924118] type=1400 audit(1366832732.932:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=906 comm="apparmor_parser"
[   25.924229] type=1400 audit(1366832732.932:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
[   25.924303] type=1400 audit(1366832732.932:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=966 comm="apparmor_parser"
[   25.924922] type=1400 audit(1366832732.936:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=906 comm="apparmor_parser"
[   25.925080] type=1400 audit(1366832732.936:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
[   25.925333] type=1400 audit(1366832732.936:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=966 comm="apparmor_parser"
[   25.925437] type=1400 audit(1366832732.936:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=906 comm="apparmor_parser"
[   25.925570] type=1400 audit(1366832732.936:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
[   25.995390] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   26.252392] init: failsafe main process (990) killed by TERM signal
[   26.331816] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   26.348501] type=1400 audit(1366832733.356:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1096 comm="apparmor_parser"
[   26.349335] type=1400 audit(1366832733.360:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1096 comm="apparmor_parser"
[   26.351218] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   26.351448] usbcore: registered new interface driver uvcvideo
[   26.351452] USB Video Class driver (1.1.1)
[   26.393513] [drm] Memory usable by graphics device = 2048M
[   26.393523] i915 0000:00:02.0: setting latency timer to 64
[   26.422243] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   26.422264] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.422266] [drm] Driver supports precise vblank timestamp query.
[   26.422421] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   26.433196] [drm] Wrong MCH_SSKPD value: 0x16040307
[   26.433201] [drm] This can cause pipe underruns and display issues.
[   26.433202] [drm] Please upgrade your BIOS to fix this.
[   26.450526] fbcon: inteldrmfb (fb0) is primary device
[   26.529142] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   26.529144] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   26.529146] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   26.529148] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   26.529149] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   26.529152] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   26.529211] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.581552] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   26.598735] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.605365] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   26.997248] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.003874] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.202124] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.416092] Console: switching to colour frame buffer device 170x48
[   27.418755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   27.418758] i915 0000:00:02.0: registered panic notifier
[   27.439280] acpi device:33: registered as cooling_device9
[   27.439725] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   27.441705] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   27.442041] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.442443] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   27.463227] init: alsa-restore main process (1188) terminated with status 19
[   27.517423] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   27.517716] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   27.517987] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   27.803795] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   28.464047] init: plymouth-stop pre-start process (1461) terminated with status 1
[   33.412364] wlan0: authenticate with 00:04:0e:e4:00:3d
[   33.416876] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   33.418847] wlan0: authenticated
[   33.418999] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   33.419004] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   33.419639] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   33.423445] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   33.429366] wlan0: associated
[   33.429467] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.133819] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[   56.142133] cfg80211: Calling CRDA to update world regulatory domain
[   56.148841] cfg80211: World regulatory domain updated:
[   56.148847] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   56.148850] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   56.148853] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   56.148855] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   56.148857] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   56.148859] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.429571] PM: Syncing filesystems ... done.
[   60.434760] PM: Preparing system for mem sleep
[   60.435168] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   60.448690] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   60.464586] PM: Entering mem sleep
[   60.464670] Suspending console(s) (use no_console_suspend to debug)
[   60.465139] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   60.465167] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   60.468191] sd 1:0:0:0: [sdb] Stopping disk
[   60.477446] mei_me 0000:00:16.0: suspend
[   60.663555] sd 0:0:0:0: [sda] Stopping disk
[   61.280049] PM: suspend of devices complete after 815.651 msecs
[   61.280288] PM: late suspend of devices complete after 0.237 msecs
[   61.295977] r8169 0000:02:00.0: System wakeup enabled by ACPI
[   61.375862] PM: noirq suspend of devices complete after 95.639 msecs
[   61.376127] ACPI: Preparing to enter system sleep state S3
[   61.377134] PM: Saving platform NVS memory
[   61.378894] Disabling non-boot CPUs ...
[   61.380592] smpboot: CPU 1 is now offline
[   61.483730] smpboot: CPU 2 is now offline
[   61.484756] Broke affinity for irq 1
[   61.484775] Broke affinity for irq 12
[   61.587656] smpboot: CPU 3 is now offline
[   61.589491] ACPI: Low-level resume complete
[   61.589545] PM: Restoring platform NVS memory
[   61.590837] Enabling non-boot CPUs ...
[   61.591915] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   61.603044] Disabled fast string operations
[   61.605451] Intel pstate controlling: cpu 1
[   61.605549] CPU1 is up
[   61.606621] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   61.617658] Disabled fast string operations
[   61.620087] Intel pstate controlling: cpu 2
[   61.620184] CPU2 is up
[   61.621237] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   61.632272] Disabled fast string operations
[   61.634786] Intel pstate controlling: cpu 3
[   61.634880] CPU3 is up
[   61.639761] ACPI: Waking up from system sleep state S3
[   61.786360] PM: noirq resume of devices complete after 143.474 msecs
[   61.786609] PM: early resume of devices complete after 0.209 msecs
[   61.786677] i915 0000:00:02.0: setting latency timer to 64
[   61.786697] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[   61.786854] ahci 0000:00:1f.2: setting latency timer to 64
[   61.786995] r8169 0000:02:00.0: System wakeup disabled by ACPI
[   61.786997] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[   61.787151] usb usb3: root hub lost power or was reset
[   61.787154] usb usb4: root hub lost power or was reset
[   61.787228] ehci-pci 0000:00:1a.0: setting latency timer to 64
[   61.792112] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   61.792233] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[   61.792246] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[   61.792258] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[   61.792270] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[   61.792281] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[   61.792466] ehci-pci 0000:00:1d.0: setting latency timer to 64
[   61.793721] [drm] Wrong MCH_SSKPD value: 0x16040307
[   61.793722] [drm] This can cause pipe underruns and display issues.
[   61.793723] [drm] Please upgrade your BIOS to fix this.
[   62.002247] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[   62.121846] ata4: SATA link down (SStatus 0 SControl 300)
[   62.137868] ata5: SATA link down (SStatus 0 SControl 300)
[   62.145867] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   62.150004] ata2.00: configured for UDMA/133
[   62.165987] sd 1:0:0:0: [sdb] Starting disk
[   62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[   62.636877] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[   62.636893] PM: Device 1-1.2 failed to resume async: error -32
[   62.705737] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
[   62.800405] btusb 2-1.5:1.0: no reset_resume for driver btusb?
[   62.800410] btusb 2-1.5:1.1: no reset_resume for driver btusb?
[   63.744949] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   64.200446] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   64.202725] ata1.00: configured for UDMA/133
[   64.216476] sd 0:0:0:0: [sda] Starting disk
[   64.242329] PM: resume of devices complete after 2457.453 msecs
[   64.243338] PM: Finishing wakeup.
[   64.243543] usb 1-1.2: USB disconnect, device number 3
[   64.243339] Restarting tasks ... done.
[   64.258140] video LNXVIDEO:00: Restoring backlight state
[   64.380328] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
[   64.477612] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[   64.477618] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.477621] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[   64.477623] usb 1-1.2: Manufacturer: Logitech
[   64.481934] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
[   64.482190] hid-generic 0003:046D:C00E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[   64.635507] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   64.642163] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   64.859137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   71.003724] wlan0: authenticate with 00:04:0e:e4:00:3d
[   71.008443] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   71.010311] wlan0: authenticated
[   71.010448] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   71.010453] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   71.011563] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   71.015264] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   71.021863] wlan0: associated
[   71.021976] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Attachment: config-3.9.0-rc8-next20130424-2-iniza-small
Description: Binary data


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux