The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.
We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)
Signed-off-by: Adrian Thomasset <adrian.thomasset@xxxxxx>
---
drivers/usb/serial/ftdi_sio.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6be5853..f17ef04 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1794,20 +1794,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
}
/*
- * First and second port on STMCLiteadaptors is reserved for JTAG interface
- * and the forth port for pio
+ * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
+ * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
+ * can be accessed from userspace.
+ * The next two ports are enabled as UARTs by default, where port 2 is
+ * a conventional RS-232 UART.
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
- if (interface == udev->actconfig->interface[2])
- return 0;
-
- dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ if (interface == udev->actconfig->interface[0] ||
+ interface == udev->actconfig->interface[1]) {
+ dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ return -ENODEV;
+ }
- return -ENODEV;
+ return 0;
}
/*
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
