The patches create the mv-usb phy driver The patches remove the callbacks in the platform data for phy initialization and shutdown, and directly write a phy driver and make udc/ehci/otg to call it. usb: phy: protect phy init and shutdown for mutiple deivces usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Above patches are marvell usb PHY driver support. usb: gadget: mv_udc: use PHY driver for udc usb: ehci: ehci-mv: use PHY driver for ehci usb: phy: phy-mv-usb: use USB2 PHY driver for otg Above patches modify the udc/ehci/otg drivers to make use of PHY driver. usb: mv_u3d: usb phy drivers for phy operation Above patch is the fix for marvel usb3 gadget driver. It will make use of PHY driver. arm: mmp2: change the defintion of usb devices arm: pxa910: change the defintion of usb devices arm: ttc_dkb: modify usb support arm: mmp: remove unused usb devices arm: brownstone: add usb support for the board Above patches are the changes from SOCes. usb: mv_usb: remove the phy callbacks in pdata Above patch finally remove the callbacks for PHY in pdata. V2->V1: Change the Signed-off-by to be right email address v3->v2 re-format the patches to new code base v4->v3 1. make mv udc gadget driver depend on ARCH_PXA and ARCH_MMP 2. remove __devinit and __devexit 3. make the driver compiled successful if CONFIG_MV_USB2_PHY is not defined. The modified patches are usb: gadget: mv_udc: make mv_udc depends on ARCH_MMP or ARCH_PXA usb: phy: mv_usb2: add PHY driver for marvell usb2 controller v5->v4 make the struct mv_usb2_extern_chip member ->head to be struct atomic_notifier_head instead of struct atomic_notifier_head *. v6->v5 the bug fix patches are merged. Removed the dependcy of ARCH_MMP and ARCH_PXA, and make the driver can be compiled for x86. The device tree support patches need modification, remove them from this patch series, and they will be submitted in another series. v7->v6 Use usb_add_phy_dev and related APIs to add PHY drivers. Removed the device tree support in PHY driver. It will be added in another patch series. v8->v7 bugs fix in phy driver. directly use devm_usb_get_phy_dev return value for error return. v9->v8 Remove u2o_xxx. Add prefix for register definition Move mutex to common PHY layer Use module_platform_driver() to register driver Use usleep_range to replace udelay Chao Xie (12): usb: phy: protect phy init and shutdown for mutiple deivces usb: phy: mv_usb2: add PHY driver for marvell usb2 controller usb: gadget: mv_udc: use PHY driver for udc usb: ehci: ehci-mv: use PHY driver for ehci usb: phy: phy-mv-usb: use USB2 PHY driver for otg usb: mv_u3d: usb phy drivers for phy operation arm: mmp2: change the defintion of usb devices arm: pxa910: change the defintion of usb devices arm: ttc_dkb: modify usb support arm: mmp: remove unused usb devices arm: brownstone: add usb support for the board usb: mv_usb: remove the phy callbacks in pdata arch/arm/mach-mmp/brownstone.c | 56 +++++ arch/arm/mach-mmp/include/mach/mmp2.h | 4 + arch/arm/mach-mmp/include/mach/pxa910.h | 7 +- arch/arm/mach-mmp/mmp2.c | 4 + arch/arm/mach-mmp/pxa910.c | 4 + arch/arm/mach-mmp/ttc_dkb.c | 39 +++- drivers/usb/gadget/mv_u3d.h | 3 +- drivers/usb/gadget/mv_u3d_core.c | 54 ++--- drivers/usb/gadget/mv_udc.h | 2 +- drivers/usb/gadget/mv_udc_core.c | 50 ++--- drivers/usb/host/ehci-mv.c | 49 ++--- drivers/usb/phy/Kconfig | 6 + drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-mv-usb.c | 53 ++--- drivers/usb/phy/phy-mv-usb.h | 2 +- drivers/usb/phy/phy-mv-usb2.c | 380 +++++++++++++++++++++++++++++++ drivers/usb/phy/phy.c | 6 + include/linux/platform_data/mv_usb.h | 3 - include/linux/usb/mv_usb2.h | 29 +++ include/linux/usb/phy.h | 22 ++- 20 files changed, 624 insertions(+), 150 deletions(-) create mode 100644 drivers/usb/phy/phy-mv-usb2.c create mode 100644 include/linux/usb/mv_usb2.h -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
