For all ux500 based platforms the maximum number of end-points are used.
Move this knowledge into the driver so we can relinquish the burden from
platform data. This also removes quite a bit of complexity from the driver
and will aid us when we come to enable the driver for Device Tree.
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/mach-ux500/usb.c | 14 ++++++------
drivers/usb/musb/ux500_dma.c | 30 ++++++++------------------
include/linux/platform_data/usb-musb-ux500.h | 5 +----
3 files changed, 16 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 821703d..8aff9a4 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -22,7 +22,7 @@
.dir = STEDMA40_MEM_TO_PERIPH, \
}
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
@@ -34,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
MUSB_DMA40_RX_CH
};
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
@@ -46,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
MUSB_DMA40_TX_CH,
};
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_rx_ch[0],
&musb_dma_rx_ch[1],
&musb_dma_rx_ch[2],
@@ -57,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
&musb_dma_rx_ch[7]
};
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_tx_ch[0],
&musb_dma_tx_ch[1],
&musb_dma_tx_ch[2],
@@ -71,8 +71,6 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
static struct ux500_musb_board_data musb_board_data = {
.dma_rx_param_array = ux500_dma_rx_param_array,
.dma_tx_param_array = ux500_dma_tx_param_array,
- .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
- .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
.dma_filter = stedma40_filter,
};
@@ -119,7 +117,7 @@ static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
musb_dma_rx_ch[idx].dev_type = dev_type[idx];
}
@@ -127,7 +125,7 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
musb_dma_tx_ch[idx].dev_type = dev_type[idx];
}
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 039e567d..c75e07a 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -47,10 +47,8 @@ struct ux500_dma_channel {
struct ux500_dma_controller {
struct dma_controller controller;
- struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
- struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
- u32 num_rx_channels;
- u32 num_tx_channels;
+ struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+ struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
void *private_data;
dma_addr_t phy_base;
};
@@ -142,19 +140,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
- u32 max_ch;
- /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+ /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
* to specified hw_ep. For example DMA channel 0 can only be allocated
* to hw_ep 1 and 9.
*/
if (ch_num > 7)
ch_num -= 8;
- max_ch = is_tx ? controller->num_tx_channels :
- controller->num_rx_channels;
-
- if (ch_num >= max_ch)
+ if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
return NULL;
ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
@@ -262,7 +256,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
struct dma_channel *channel;
u8 ch_num;
- for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->rx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -272,7 +266,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
dma_release_channel(ux500_channel->dma_chan);
}
- for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->tx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -301,26 +295,21 @@ static int ux500_dma_controller_start(struct dma_controller *c)
void **param_array;
struct ux500_dma_channel *channel_array;
- u32 ch_count;
dma_cap_mask_t mask;
- if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
- (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
- return -EINVAL;
- controller->num_rx_channels = data->num_rx_channels;
- controller->num_tx_channels = data->num_tx_channels;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* Prepare the loop for RX channels */
channel_array = controller->rx_channel;
- ch_count = data->num_rx_channels;
param_array = data->dma_rx_param_array;
for (dir = 0; dir < 2; dir++) {
- for (ch_num = 0; ch_num < ch_count; ch_num++) {
+ for (ch_num = 0;
+ ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+ ch_num++) {
ux500_channel = &channel_array[ch_num];
ux500_channel->controller = controller;
ux500_channel->ch_num = ch_num;
@@ -348,7 +337,6 @@ static int ux500_dma_controller_start(struct dma_controller *c)
/* Prepare the loop for TX channels */
channel_array = controller->tx_channel;
- ch_count = data->num_tx_channels;
param_array = data->dma_tx_param_array;
is_tx = 1;
}
diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h
index 4c1cc50..dd9c83a 100644
--- a/include/linux/platform_data/usb-musb-ux500.h
+++ b/include/linux/platform_data/usb-musb-ux500.h
@@ -9,14 +9,11 @@
#include <linux/dmaengine.h>
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8
struct ux500_musb_board_data {
void **dma_rx_param_array;
void **dma_tx_param_array;
- u32 num_rx_channels;
- u32 num_tx_channels;
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
