Kill custom closing_wait implementation and let the tty-layer handle it
instead.
Note that the port drain-delay is set to three characters to keep the
20ms delay after wait_until_sent at low baudrates (1200 baud) during close.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/ti_usb_3410_5052.c | 69 ++++++++---------------------------
1 file changed, 15 insertions(+), 54 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 6a40823..4b52132 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -71,7 +71,6 @@ struct ti_port {
__u8 tp_uart_mode; /* 232 or 485 modes */
unsigned int tp_uart_base_addr;
int tp_flags;
- int tp_closing_wait;/* in .01 secs */
wait_queue_head_t tp_write_wait;
struct ti_device *tp_tdev;
struct usb_serial_port *tp_port;
@@ -127,8 +126,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg);
static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
-static void ti_drain(struct ti_port *tport, unsigned long timeout);
-
static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
@@ -428,7 +425,7 @@ static int ti_port_probe(struct usb_serial_port *port)
tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
else
tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
- tport->tp_closing_wait = closing_wait;
+ port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
kfree(tport);
@@ -581,6 +578,8 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
tport->tp_is_open = 1;
++tdev->td_open_port_count;
+ port->port.drain_delay = 3;
+
goto release_lock;
unlink_int_urb:
@@ -609,8 +608,6 @@ static void ti_close(struct usb_serial_port *port)
tport->tp_is_open = 0;
- ti_drain(tport, (tport->tp_closing_wait*HZ)/100);
-
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
tport->tp_write_urb_in_use = 0;
@@ -1295,10 +1292,15 @@ static int ti_get_serial_info(struct ti_port *tport,
{
struct usb_serial_port *port = tport->tp_port;
struct serial_struct ret_serial;
+ unsigned cwait;
if (!ret_arg)
return -EFAULT;
+ cwait = port->port.closing_wait;
+ if (cwait != ASYNC_CLOSING_WAIT_NONE)
+ cwait = jiffies_to_msecs(cwait) / 10;
+
memset(&ret_serial, 0, sizeof(ret_serial));
ret_serial.type = PORT_16550A;
@@ -1307,7 +1309,7 @@ static int ti_get_serial_info(struct ti_port *tport,
ret_serial.flags = tport->tp_flags;
ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
- ret_serial.closing_wait = tport->tp_closing_wait;
+ ret_serial.closing_wait = cwait;
if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
return -EFAULT;
@@ -1320,12 +1322,17 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg)
{
struct serial_struct new_serial;
+ unsigned cwait;
if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
return -EFAULT;
+ cwait = new_serial.closing_wait;
+ if (cwait != ASYNC_CLOSING_WAIT_NONE)
+ cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
+
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- tport->tp_closing_wait = new_serial.closing_wait;
+ tport->tp_port->port.closing_wait = cwait;
return 0;
}
@@ -1370,52 +1377,6 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
}
-static void ti_drain(struct ti_port *tport, unsigned long timeout)
-{
- struct ti_device *tdev = tport->tp_tdev;
- struct usb_serial_port *port = tport->tp_port;
- wait_queue_t wait;
- u8 lsr;
-
- spin_lock_irq(&tport->tp_lock);
-
- /* wait for data to drain from the buffer */
- tdev->td_urb_error = 0;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tport->tp_write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (kfifo_len(&tport->write_fifo) == 0
- || timeout == 0 || signal_pending(current)
- || tdev->td_urb_error
- || port->serial->disconnected) /* disconnect */
- break;
- spin_unlock_irq(&tport->tp_lock);
- timeout = schedule_timeout(timeout);
- spin_lock_irq(&tport->tp_lock);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tport->tp_write_wait, &wait);
- spin_unlock_irq(&tport->tp_lock);
-
- mutex_lock(&port->serial->disc_mutex);
- /* wait for data to drain from the device */
- /* wait for empty tx register, plus 20 ms */
- timeout += jiffies;
- lsr = 0;
- while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
- && !(lsr & TI_LSR_TX_EMPTY) && !tdev->td_urb_error
- && !port->serial->disconnected) {
- if (ti_get_lsr(tport, &lsr))
- break;
- mutex_unlock(&port->serial->disc_mutex);
- msleep_interruptible(20);
- mutex_lock(&port->serial->disc_mutex);
- }
- mutex_unlock(&port->serial->disc_mutex);
-}
-
-
static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
{
unsigned long flags;
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
