On Wed, 17 Apr 2013, Joe Perches wrote:
> > > Perhaps a good patch would be to convert US_DEBUGP
> > > calls where a struct us_data * is available to
> > > to us_stor_dbg(struct us_data *, const char *fmt, ...)
> >
> > That would be an excellent start.
>
> Hey Alan, care to try this?
>
> o Convert uses of US_DEBUGP to usb_stor_dbg
> o Add "struct us_data *" to usb_stor_dbg uses when
> available and NULL when not.
> o usb_stor_dbg now uses struct device */dev_vprint_emit
> when available
> o Removed embedded function names
> o Coalesce formats
> o Remove trailing whitespace
> o Remove useless OOM messages
> o Remove useless function entry/exit logging
>
> Compiles but completely untested.
>
> This won't apply against Greg's latest usb tree
> as he's just taken the previous patch.
Wow, that's an impressive amount of work in a short time! I have only
a few comments.
I'm not very concerned about the subdrivers. In fact, for testing
purposes it would probably be better to start by changing just the
"core" part of usb-storage (that is, the parts that actually get built
into the usb-storage.o file) and then do each subdriver separately, one
patch for each.
There are a few places where things could be improved...
> +int usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
> +{
> + struct va_format vaf;
> + va_list args;
> + int r;
> +
> + va_start(args, fmt);
> +
> + if (us && us->pusb_dev) {
> + r = dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args);
Isn't there a symbolic constant you can use instead of "7"?
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -349,8 +347,6 @@ static int command_abort(struct scsi_cmnd *srb)
> {
> struct us_data *us = host_to_us(srb->device->host);
>
> - US_DEBUGP("%s called\n", __func__);
> -
> /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
> * bits are protected by the host lock. */
> scsi_lock(us_to_host(us));
> @@ -386,8 +382,6 @@ static int device_reset(struct scsi_cmnd *srb)
> struct us_data *us = host_to_us(srb->device->host);
> int result;
>
> - US_DEBUGP("%s called\n", __func__);
> -
> /* lock the device pointers and do the reset */
> mutex_lock(&(us->dev_mutex));
> result = us->transport_reset(us);
> @@ -402,7 +396,6 @@ static int bus_reset(struct scsi_cmnd *srb)
> struct us_data *us = host_to_us(srb->device->host);
> int result;
>
> - US_DEBUGP("%s called\n", __func__);
> result = usb_stor_port_reset(us);
> return result < 0 ? FAILED : SUCCESS;
> }
These three functions get called only in unusual circumstances, and for
debugging we do want to know when they get called. So these statements
should remain.
> --- a/drivers/usb/storage/usb.c
> +++ b/drivers/usb/storage/usb.c
> @@ -918,7 +902,7 @@ int usb_stor_probe1(struct us_data **pus,
> struct us_data *us;
> int result;
>
> - US_DEBUGP("USB Mass Storage device detected\n");
> + usb_stor_dbg(NULL, "USB Mass Storage device detected\n");
>
> /*
> * Ask the SCSI layer to allocate a host structure, with extra
Even though "us" isn't available here, intf is. This line can be a
regular dev_dbg(&intf->dev, ...). Or even dev_info(&intf->dev, ...);
this looks like the sort of thing one sees all the time in kernel logs.
> @@ -1075,9 +1058,8 @@ static int storage_probe(struct usb_interface *intf,
> } else {
> unusual_dev = &for_dynamic_ids;
>
> - US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport",
> - "with the Transparent SCSI protocol for dynamic id:",
> - id->idVendor, id->idProduct);
> + usb_stor_dbg(us, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
> + id->idVendor, id->idProduct);
> }
>
> result = usb_stor_probe1(&us, intf, id, unusual_dev);
And here "us" hasn't been set yet (it gets set in usb_stor_probe1), so
it shouldn't be used. This can become another dev_dbg(&intf->dev, ...)
line.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
