On 04/17/2013 01:32 AM, I wrote:
The driver currently only supports R8A7779 SoC. Compared to it, R8A7778 USB-PHY
has extra register range containing two high-speed signal quality characteristic
control registers which should be set up during USB-PHY startup depending on
whether a ferrite bead is in use or not. So, we now handle an optional second
memory range in the driver's probe method, add the 'ferrite_bead' field to the
driver's platform data, and add an extra (optional) step to the USB-PHY startup
routine which sets up the extended registers.
Also mark in the driver's Kconfig section that R8A7778 is now supported and
generally clarify that section, uppercasing the word "phy", while at it...
The patch has been tested on the Marzen and BOCK-W boards.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Acked-by: Felipe Balbi <balbi@xxxxxx>
[...]
@@ -109,10 +126,11 @@ static int rcar_usb_phy_init(struct usb_
goto phy_init_end;
}
- /* (4) USB-PHY reset clear */
+ /* (5) USB-PHY reset clear */
iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
/* Board specific port settings */
+ printk("sizeof(*pdata) = %d\n", sizeof(*pdata));
Shoot! I thought I'd killed that... :-(
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
