Register the USB PHY device from bockw_init(), passing the platform data to it.
Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to
get registered too...
The patch has been tested on the BOCK-W board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
Changes since version 2:
- refreshed the patch.
Changes since the original posting:
- removed initializer for no longer existing field in 'usb_phy_platform_data',
modified the comment to the 'ferrite_bead' field initializer.
arch/arm/mach-shmobile/board-bockw.c | 6 ++++++
1 file changed, 6 insertions(+)
Index: renesas/arch/arm/mach-shmobile/board-bockw.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c
+++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -54,6 +54,10 @@ static struct resource smsc911x_resource
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
+static struct rcar_phy_platform_data usb_phy_platform_data = {
+ .ferrite_bead = true, /* not sure about this... */
+};
+
static const struct pinctrl_map bockw_pinctrl_map[] = {
/* SCIF0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
@@ -70,6 +74,7 @@ static void __init bockw_init(void)
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
+ r8a7778_add_usb_phy_device(&usb_phy_platform_data);
pinctrl_register_mappings(bockw_pinctrl_map,
ARRAY_SIZE(bockw_pinctrl_map));
@@ -110,4 +115,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
.init_machine = bockw_init,
.init_time = shmobile_timer_init,
.dt_compat = bockw_boards_compat_dt,
+ .init_late = r8a7778_init_late,
MACHINE_END
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
