Hi Ravi, On 08.04.2013 09:57, B, Ravi wrote: >> Hi all, >> >> here are some patches to separate the HCD and gadget part of the musb >> driver so they can be deselected in Kconfig. They also make the driver >> keep track of the configured port mode that is set from DT, so the >> actual runtime configuration can be selected dynamically. >> >> One thing that is still broken is that once pm_suspend() was called on >> a musb device on a USB disconnect, the port won't wake up again when a >> device is plugged back in. > > This could be due to SESSION bit removal when root port is disconnected in otg_timer function. Not sure if we are thinking about the same details, but after debuging this a further, turns out that musb_platform_try_idle() eventually switches off the entire controller, which then leads to DRVBUS going low on the board. That, in turn, prevents the interrupt from being triggered on reconnect, because the host port is not powered anymore. I don't know yet how to cope with that, but for now, I simply disabled the call from musb_stage0_irq() to musb_platform_try_idle() locally. Thanks, Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
