Currently the driver hard-codes USBPCTRL0 register to 0. It is wrong since this
register contains board-specific USB ports configuration and so its value should
be somehow passed via the platform data. Add <linux/usb/rcar-phy.h> file with
the USBPCTRL0 bit #define's and 'struct rcar_phy_platform_data' containing the
value to be set by the driver to that register.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
include/linux/usb/rcar-phy.h | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
Index: renesas/include/linux/usb/rcar-phy.h
===================================================================
--- /dev/null
+++ renesas/include/linux/usb/rcar-phy.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RCAR_PHY_H
+#define __RCAR_PHY_H
+
+#include <linux/bitops.h>
+
+/* USBPCTRL0 register bits */
+#define USBPCTRL0_OVC2 BIT(10) /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define USBPCTRL0_OVC1_VBUS1 BIT(9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+#define USBPCTRL0_OVC0 BIT(8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define USBPCTRL0_OVC2_ACT BIT(6) /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define USBPCTRL0_PENC BIT(4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define USBPCTRL0_OVC0_ACT BIT(3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define USBPCTRL0_OVC1_ACT BIT(1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define USBPCTRL0_PORT1 BIT(0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
+
+struct rcar_phy_platform_data {
+ u32 usbpctrl0; /* USBPCTRL0 register value */
+};
+
+#endif /* __RCAR_PHY_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
