Re: [PATCH v3] USB: PHY: Palmas USB Transceiver Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 26 March 2013 02:31 PM, Graeme Gregory wrote:
On 26/03/13 06:03, Kishon Vijay Abraham I wrote:
+static int palmas_usb_read(struct palmas *palmas, unsigned int reg,
+               unsigned int *dest)
+{
+       unsigned int addr;
+       int slave;
+
+       slave = PALMAS_BASE_TO_SLAVE(PALMAS_USB_OTG_BASE);
+       addr = PALMAS_BASE_TO_REG(PALMAS_USB_OTG_BASE, reg);
+
+       return regmap_read(palmas->regmap[slave], addr, dest);


Please use the generic api for palmas_read()/palmas_write(0 as it will
be ease on debugging on register access.
Direct regmap_read() does not help much on this.
Graeme,
Any reason why you dint use palmas_read()/palmas_write here?
Btw palmas_read()/palmas_write() internally uses regmap APIs.
Because I was not a fan of tightly coupling the child devices to the
parent MFD. palmas_read/write were added by Laxman.


But still you are using the PALMAS macro here and indirectly it is tied up. It is not completely independent. If need to be independent then regmap pointer with address need to be passed as independt header and no where on code whould refer the PALMA. I think as per current code, it is not possible although it is your big plan what I understand from some time back in one of patch discussion.


+       palmas_usb->dev         = &pdev->dev;
+
+       palmas_usb->irq1 = regmap_irq_get_virq(palmas->irq_data,
+                                               PALMAS_ID_OTG_IRQ);
+       palmas_usb->irq2 = regmap_irq_get_virq(palmas->irq_data,
+                                               PALMAS_ID_IRQ);
+       palmas_usb->irq3 = regmap_irq_get_virq(palmas->irq_data,
+                                               PALMAS_VBUS_OTG_IRQ);
+       palmas_usb->irq4 = regmap_irq_get_virq(palmas->irq_data,
+                                               PALMAS_VBUS_IRQ);
Should be come from platform_get_irq() through platform driver.
No. It can be obtained from regmap too.
Kishon,
I think it is very much possible. You can pass the interrupt throough IRQ_RESOURCE and populate it from DT. If you provide proper interrupt parent and irq number then irq framework take care of every thing. already tested this with RTC interrupt of plama and it worked very well.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux