Remove broken TIOCMIWAIT support.
This drivers appears to implement TIOCMIWAIT but has no means of
receiving modem-status interrupts.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/spcp8x5.c | 68 --------------------------------------------
1 file changed, 68 deletions(-)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 549ef68..e24d23b 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -472,8 +472,6 @@ static void spcp8x5_process_read_urb(struct urb *urb)
status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- /* wake up the wait for termios */
- wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
@@ -509,71 +507,6 @@ static void spcp8x5_process_read_urb(struct urb *urb)
tty_flip_buffer_push(&port->port);
}
-static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
- unsigned int arg)
-{
- struct spcp8x5_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- unsigned int prevstatus;
- unsigned int status;
- unsigned int changed;
-
- spin_lock_irqsave(&priv->lock, flags);
- prevstatus = priv->line_status;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- while (1) {
- /* wake up in bulk read */
- interruptible_sleep_on(&port->delta_msr_wait);
-
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (port->serial->disconnected)
- return -EIO;
-
- spin_lock_irqsave(&priv->lock, flags);
- status = priv->line_status;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- changed = prevstatus^status;
-
- if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
- ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
- ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) ||
- ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
- return 0;
-
- prevstatus = status;
- }
- /* NOTREACHED */
- return 0;
-}
-
-static int spcp8x5_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
-
- dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
- port->number, cmd);
-
- switch (cmd) {
- case TIOCMIWAIT:
- dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
- port->number);
- return spcp8x5_wait_modem_info(port, arg);
-
- default:
- dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__,
- cmd);
- break;
- }
-
- return -ENOIOCTLCMD;
-}
-
static int spcp8x5_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
@@ -634,7 +567,6 @@ static struct usb_serial_driver spcp8x5_device = {
.carrier_raised = spcp8x5_carrier_raised,
.set_termios = spcp8x5_set_termios,
.init_termios = spcp8x5_init_termios,
- .ioctl = spcp8x5_ioctl,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
.port_probe = spcp8x5_port_probe,
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
