Re: Plug and play for a tty line disciple networking device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 20, 2013 at 08:25:15PM -0400, jonsmirl@xxxxxxxxx wrote:
> On Wed, Mar 20, 2013 at 8:14 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > On Wed, Mar 20, 2013 at 08:04:29PM -0400, jonsmirl@xxxxxxxxx wrote:
> >> On Wed, Mar 20, 2013 at 7:26 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> >> > On Tue, Mar 19, 2013 at 11:30:05AM -0400, jonsmirl@xxxxxxxxx wrote:
> >> >> How can you achieve plug and play for a ft2232 based USB serial device
> >> >> implementing 802.15.4 networking?
> >> >>
> >> >> The device has a 802.15.4 SOC with a UART attached to a ft2232. With
> >> >> firmware loaded the only thing it can do is talk the 802.15.4 tty line
> >> >> discipline, it is not a general purpose serial port.
> >> >>
> >> >> Right now the device works by plugging it in and it appears as a
> >> >> generic USB serial device like ttyUSB0. You then run a user space app
> >> >> which sets the line discipline, holds the port open and attaches it to
> >> >> the 6lowpan implementation in the networking code. But doing that is
> >> >> inconvenient and users needs to be trained to do it. Much simpler if
> >> >> we could just plug the device in and it worked.
> >> >>
> >> >> We can add a EEPROM to the ft2232 to give it a unique USB ID.  Is it
> >> >> possible to make a kernel driver that see this ID, sets the line
> >> >> discipline and wires the serial port directly into the networking
> >> >> code?
> >> >
> >> > Yes, you can do that.
> >>
> >> Is there an existing driver in the kernel that does this?
> >> So far all of the ones I've checked still need a user space app.
> >
> > Look at the bluetooth drivers, they have their own line dicipline I
> > think.
> 
> Bluetooth drivers use line discipline on UARTs. On USB they have their
> own set of Bluetooth descriptors.
> 
> CAN over serial has a line discipline but it needs a user space app.

In your driver, just attach the line discipline directly to the tty
device you create.  You will not be using the "normal" usb-serial logic
at all if you do this, but you should be fine, right?

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux