[PATCH 17/21] USB: pl2303: fix use-after-free in TIOCMIWAIT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
 drivers/usb/serial/pl2303.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 54adc91..3b10018 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -139,7 +139,6 @@ struct pl2303_serial_private {
 
 struct pl2303_private {
 	spinlock_t lock;
-	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
 };
@@ -233,7 +232,6 @@ static int pl2303_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -607,11 +605,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		interruptible_sleep_on(&priv->delta_msr_wait);
+		interruptible_sleep_on(&port->delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -719,7 +720,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
@@ -783,7 +784,7 @@ static void pl2303_process_read_urb(struct urb *urb)
 	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux