Hi Martin, I'm really having trouble following you here. Please don't try to tell me what you think the root cause of the issue is. Just tell me exactly (in a paragraph or less) what your symptoms are. Sending lots of log files and lsusb output at me isn't helpful if I don't know what your issue is. Sarah Sharp On Thu, Mar 14, 2013 at 06:30:53PM +0100, Martin Mokrejs wrote: > [resend, no dmesg attached] > > Hi, > happened to me again that I plugged in some devcie into my USB3 socket > in my laptop (usually use an external HUB). Don't believe this is a new > issue as a whole, I am facing this time to time since 3.3 time when I bought > the laptop. > But now, I realized the first device works but subsequently plugged in > devices do not show up until until I run 'lsusb -vv'. Simple 'lsusb -v' > or 'lsusb -t' is not enough. The port starts to work after dmesg logs: > > > [ 1445.597641] pcieport 0000:00:1c.4: PME# disabled > [ 1445.617667] xhci_hcd 0000:0b:00.0: PME# disabled > > I believe lsusb -vv while querying for the detailed device info triggers > a fix. > > Funny, but maybe this will help us to understand why my express card slot > somehow relates to the USB3 proivided by the TexasInstruments chip. This > is a SandyBridge-based Dell Vostro 3550 laptop. I should add that on the usb > mailing list about a year ago some TexasInstruments developer published that > they had a hardware bug in a "USB redriver", and as my laptop was made in > fall 2011 I am likely having having the buggy HW. If I remember right, the > report was about the problem that once you pluging a USB2 device into the XHCI > slot, subsequently plugged in USB3 devices won't negotiate at SuperSpeed until > you power off computer. So, I think I face a different issue but had to mention > this. > > I use pcie_aspm=off on my kernel command line. I tried to catch some usb traffic > on the dead port but the file from usbmon is really empty until I do the > 'lsusb -vv'. I tried to turn off the usb powersaving at runtime but I do not > have the file to do: > > # echo -n -1 > /sys/bus/usb/devices/3-0\:1.0/power/autosuspend > > :( > > # ls -la /sys/bus/usb/devices/3-0\:1.0/power/ > total 0 > drwxr-xr-x 2 root root 0 Mar 14 13:11 . > drwxr-xr-x 6 root root 0 Mar 14 13:58 .. > -rw-r--r-- 1 root root 4096 Mar 14 13:11 async > -r--r--r-- 1 root root 4096 Mar 14 13:11 runtime_active_kids > -r--r--r-- 1 root root 4096 Mar 14 13:11 runtime_enabled > -r--r--r-- 1 root root 4096 Mar 14 13:11 runtime_status > -r--r--r-- 1 root root 4096 Mar 14 13:11 runtime_usage > # > > I feel related could be patches under thread: "usb: add usb port auto power off mechanism" > > > Below is a dmesg since a cold boot. I plugged in a mouse into the USB3 socket. > > [ 91.463285] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_suspend: 0 > [ 91.463377] xhci_hcd 0000:0b:00.0: PME# enabled > [ 447.389700] xhci_hcd 0000:0b:00.0: PME# disabled > [ 447.389711] xhci_hcd 0000:0b:00.0: enabling bus mastering > [ 447.389787] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_resume: 0 > [ 447.389819] usb usb3: usb wakeup-resume > > Was detected. Unplugged the mouse. > > [ 459.600056] usb 3-2: USB disconnect, device number 2 > [ 459.600058] usb 3-2: unregistering device > [ 459.600059] usb 3-2: unregistering interface 3-2:1.0 > [ 459.600622] xhci_hcd 0000:0b:00.0: shutdown urb ffff88040a641870 ep1in-intr > [ 459.702564] usb 3-2: usb_disable_device nuking all URBs > [ 459.707948] usb 3-2: Successful Endpoint Configure command > [ 459.860892] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > [ 459.860910] hub 3-0:1.0: hub_suspend > [ 459.860917] usb usb3: bus auto-suspend, wakeup 1 > [ 459.860981] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_suspend: 0 > [ 459.861070] xhci_hcd 0000:0b:00.0: PME# enabled > > Then I put the mouse back, I think it was not detected after until I did the lsusb > trick. I am not sure, sorry, but is not that important. I was repeating test once > again and just forgot now this detail. So below just that the mouse got detected, > either thanks to lsusb -vv or not. > > [ 536.745422] xhci_hcd 0000:0b:00.0: PME# disabled > [ 536.745435] xhci_hcd 0000:0b:00.0: enabling bus mastering > [ 536.745487] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_resume: 0 > [ 536.745493] usb usb3: usb auto-resume > [ 536.745509] hub 3-0:1.0: hub_resume > [ 536.745579] hub 3-0:1.0: port 2: status 0301 change 0001 > > Then a mouse disconnect: > > [ 652.232958] usb 3-2: USB disconnect, device number 3 > [ 652.232960] usb 3-2: unregistering device > [ 652.232961] usb 3-2: unregistering interface 3-2:1.0 > [ 652.233148] xhci_hcd 0000:0b:00.0: shutdown urb ffff88040b1ee288 ep1in-intr > [ 652.333325] usb 3-2: usb_disable_device nuking all URBs > [ 652.337096] usb 3-2: Successful Endpoint Configure command > [ 652.492164] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > [ 652.492183] hub 3-0:1.0: hub_suspend > [ 652.492190] usb usb3: bus auto-suspend, wakeup 1 > [ 652.492254] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_suspend: 0 > [ 652.492341] xhci_hcd 0000:0b:00.0: PME# enabled > [ 652.522157] pcieport 0000:00:1c.4: PME# enabled > > [ 688.128198] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) > > Note above two things pcieport started to mess in. I you look what xhci_hcd printed > in previous attempts the was NO pcieport involved around, at all. Now, provided > that I reported the kmemleak multiple times this year: > > unreferenced object 0xffff88040b4a0690 (size 256): > comm "swapper/0", pid 1, jiffies 4294937581 (age 17428.760s) > hex dump (first 32 bytes): > 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... > ff ff ff ff ff ff ff ff d8 9f 57 82 ff ff ff ff ..........W..... > backtrace: > [<ffffffff815fcec7>] kmemleak_alloc+0x21/0x3e > [<ffffffff81117ac4>] slab_post_alloc_hook+0x28/0x2a > [<ffffffff8111a18f>] __kmalloc+0xf3/0x105 > [<ffffffff8132b20c>] kzalloc.constprop.14+0xe/0x10 > [<ffffffff8132b66d>] device_private_init+0x14/0x63 > [<ffffffff8132d790>] dev_set_drvdata+0x19/0x2f > [<ffffffff813f19d1>] i801_probe+0x5e/0x41a > [<ffffffff812924d8>] local_pci_probe+0x39/0x61 > [<ffffffff812936fb>] pci_device_probe+0xc6/0xf3 > [<ffffffff8132dd59>] driver_probe_device+0xa9/0x1c1 > [<ffffffff8132decb>] __driver_attach+0x5a/0x7e > [<ffffffff8132c5f3>] bus_for_each_dev+0x5c/0x88 > [<ffffffff8132d8f6>] driver_attach+0x19/0x1b > [<ffffffff8132d4c6>] bus_add_driver+0xa8/0x1fa > [<ffffffff8132e33d>] driver_register+0x8c/0x106 > [<ffffffff812932f6>] __pci_register_driver+0x5c/0x60 > > I believe this is related to the issue, somehow. > > Now I started usbmon, so lets follow another attempt to repeat the bug. For clarity, > I will plug into the socket a kayboard, and it won't work until I do 'lsusb -vv'. > I pressed then space on the keyboard and that worked immediately (keyboard was dead > until lsusb -vv and also dmesg did not log anything). > > So, lsusb -vv: > > [ 802.986036] pcieport 0000:00:1c.4: PME# disabled > [ 803.016008] xhci_hcd 0000:0b:00.0: PME# disabled > [ 803.016021] xhci_hcd 0000:0b:00.0: enabling bus mastering > [ 803.016078] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_resume: 0 > [ 803.016085] usb usb3: usb auto-resume > [ 803.016103] hub 3-0:1.0: hub_resume > [ 803.016172] hub 3-0:1.0: port 2: status 0301 change 0001 > > unplug of the keyboard: > > [ 821.621331] usb usb4: usb auto-resume > [ 821.621347] hub 4-0:1.0: hub_resume > [ 821.621405] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 821.622047] hub 4-0:1.0: hub_suspend > [ 821.622053] usb usb4: bus auto-suspend, wakeup 1 > [ 967.433533] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 > [ 967.433768] hub 3-0:1.0: port 2, status 0100, change 0001, 12 Mb/s > [ 967.433771] usb 3-2: USB disconnect, device number 4 > [ 967.433772] usb 3-2: unregistering device > [ 967.433775] usb 3-2: unregistering interface 3-2:1.0 > [ 967.433946] xhci_hcd 0000:0b:00.0: shutdown urb ffff88040a641948 ep1in-intr > [ 967.579130] usb 3-2: usb_disable_device nuking all URBs > [ 967.584494] usb 3-2: Successful Endpoint Configure command > [ 967.798027] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > [ 967.798046] hub 3-0:1.0: hub_suspend > [ 967.798075] usb usb3: bus auto-suspend, wakeup 1 > [ 967.798155] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_suspend: 0 > [ 967.798242] xhci_hcd 0000:0b:00.0: PME# enabled > [ 967.828015] pcieport 0000:00:1c.4: PME# enabled > > > You see? pcieport is messing with > 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode]) > > I unplugged and replugged the keyboard multiple times and it did not work, so > I connected the mouse used in the very beginning right after cold boot, still > not working. But these were likely logged due to that. > > [ 1063.263014] pcieport 0000:00:1c.4: PME# disabled > [ 1063.272918] pcieport 0000:00:1c.4: PME# enabled > [ 1063.312915] pcieport 0000:00:1c.4: PME# disabled > [ 1063.322906] pcieport 0000:00:1c.4: PME# enabled > [ 1070.132666] pcieport 0000:00:1c.4: PME# disabled > [ 1070.142559] pcieport 0000:00:1c.4: PME# enabled > [ 1070.182601] pcieport 0000:00:1c.4: PME# disabled > [ 1070.192644] pcieport 0000:00:1c.4: PME# enabled > > After doing 'lsusb -vv' I rescued the USB3 socket and it detected the mouse. > > [ 1108.504953] pcieport 0000:00:1c.4: PME# disabled > [ 1108.525010] xhci_hcd 0000:0b:00.0: PME# disabled > [ 1108.525023] xhci_hcd 0000:0b:00.0: enabling bus mastering > [ 1108.525069] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_resume: 0 > [ 1108.525075] usb usb3: usb auto-resume > [ 1108.525094] hub 3-0:1.0: hub_resume > [ 1108.525196] hub 3-0:1.0: port 2: status 0301 change 0001 > > I unplugged the mouse: > > [ 1230.618019] usb 3-2: unregistering device > [ 1230.618020] usb 3-2: unregistering interface 3-2:1.0 > [ 1230.618188] xhci_hcd 0000:0b:00.0: shutdown urb ffff88040b1ee288 ep1in-intr > [ 1230.711764] usb 3-2: usb_disable_device nuking all URBs > [ 1230.715101] usb 3-2: Successful Endpoint Configure command > [ 1230.870763] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > [ 1230.870782] hub 3-0:1.0: hub_suspend > [ 1230.870797] usb usb3: bus auto-suspend, wakeup 1 > [ 1230.870862] xhci_hcd 0000:0b:00.0: hcd_pci_runtime_suspend: 0 > [ 1230.870950] xhci_hcd 0000:0b:00.0: PME# enabled > [ 1230.900730] pcieport 0000:00:1c.4: PME# enabled > > > In summary, note that *immediately before the line* "xhci_hcd 0000:0b:00.0: PME# disabled" > must appear "pcieport 0000:00:1c.4: PME# disabled". Don't know who is the blocker. > But in reverse order the PME# are being enabled after a device is unplugged from the USB3 > socket. > > During the tests I had an eSATA in the express card slot since cold boot but don't think > it is relevant here. The express slot is 01.c7 device and the card would be 11.0. > > > > > I will send to Alan and Sarah two files directly (thank you for their inspection): ;) > > The first part of testing is in usbmon_0u.bin (repeatedly connecting a mouse). > > The latter in usbmon_0u_mouse_unplug_keyboard_insert.bin. Both files should demonstrate > the same issue although in the latter file it might be easier to see because the keyboard > was plugged in after a mouse and was not detected until 'lsusb -vv'. > > > > > > Below is when a keyboard is connected to the dead USB3 socket: > > # diff -u -w lspci_vvvxxx_mouse_unplugged.txt lspci_vvvxxx_mouse_unplugged_keyboard_inserted.txt > --- lspci_vvvxxx_mouse_unplugged.txt 2013-03-14 12:22:34.000000000 +0100 > +++ lspci_vvvxxx_mouse_unplugged_keyboard_inserted.txt 2013-03-14 12:25:06.000000000 +0100 > @@ -747,7 +747,7 @@ > Region 2: Memory at f7d10000 (64-bit, non-prefetchable) [size=8K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > - Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- > + Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME+ > Capabilities: [48] MSI: Enable- Count=1/8 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > @@ -785,7 +785,7 @@ > 10: 04 00 d0 f7 00 00 00 00 04 00 d1 f7 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 > -40: 01 48 83 fe 0b 01 00 00 05 70 86 00 00 00 00 00 > +40: 01 48 83 fe 0b 81 00 00 05 70 86 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 10 c0 02 00 c3 8f 90 05 00 20 19 00 12 3c 07 00 > > > Now, when the port is rescued by lsusb -vv, the following can be seen: > > # diff -u -w lspci_vv_mouse_unplugged_keyboard_inserted.txt lspci_vv_mouse_unplugged_keyboard_inserted_kb_alive.txt > --- lspci_vv_mouse_unplugged_keyboard_inserted.txt 2013-03-14 12:25:13.000000000 +0100 > +++ lspci_vv_mouse_unplugged_keyboard_inserted_kb_alive.txt 2013-03-14 12:26:42.000000000 +0100 > @@ -276,7 +276,7 @@ > Capabilities: [90] Subsystem: Dell Device 04b3 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > - Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- > + Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport > > 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode]) > @@ -476,14 +476,15 @@ > > 0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02) (prog-if 30 [XHCI]) > Subsystem: Dell Device 04b3 > - Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > + Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at f7d10000 (64-bit, non-prefetchable) [size=8K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > - Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME+ > + Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] MSI: Enable- Count=1/8 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > # > > > > The difference in lsusb output is probably useless as it just shows that once the socket > was working the keyboard was picked up by a driver. Looks like yet another PCI issue. > At least no diffs in iomem. ;) > > > Thanks, > Martin > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
