Hi, On Fri, Mar 15, 2013 at 11:36:00AM +0530, Vivek Gautam wrote: > >> Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare > >> calls as required by common clock framework. > >> > >> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > >> CC: Felipe Balbi <balbi@xxxxxx> > >> CC: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > >> --- > >> drivers/usb/dwc3/dwc3-exynos.c | 6 +++--- > >> 1 files changed, 3 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c > >> index 66ca9ac..b03f609 100644 > >> --- a/drivers/usb/dwc3/dwc3-exynos.c > >> +++ b/drivers/usb/dwc3/dwc3-exynos.c > >> @@ -129,7 +129,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev) > >> exynos->dev = dev; > >> exynos->clk = clk; > >> > >> - clk_enable(exynos->clk); > >> + clk_prepare_enable(exynos->clk); > > > > eventually we need to pass this clock handling to dwc3/core.c. Just make > > sure it's optional since not all platforms need it. > > > True, as of now i could see only exynos platform getting a device > clock for dwc3-glue. > So, if not all platforms need to do this, why should we plan to move > this to dwc3/core.c ? what if dwc3.ko's probe fail ? Clock will be left enabled ;-) > > I guess the best way would be to handle clocks via > > ->runtime_suspend()/->runtime_resume() ?? > > Right, but there was a doubt actually if you can please clear that. > In device probe, after enabling runtime_pm we would need to > 'pm_runtime_get_sync' the device. > Thereby, in runtime_resume the clocks will be enabled. > Now as soon as the device probe finishes, the device will go in > suspend state, calling runtime_suspend > and the clocks would be disabled. > Now would it be possible for the controller to detect any > connect/disconnect. it depends on how you have configured your core in coreConsultant and how you're implementing the actual IP. If you have retention flip-flops then gating clocks (but not cutting Vcc) will not loose context and, if PHYs are still enabled, you will see new connect events. But that part of PM optimization has to be done as a last step, as it tends to break things apart. -- balbi
Attachment:
signature.asc
Description: Digital signature
