On Wednesday, March 13, 2013 4:03 AM, Doug Anderson wrote: > > The ehci_vbus_gpio is requested but never freed. This can cause > problems with deferred probes and would cause problems if > s5p_ehci_remove was ever called. Use devm to fix this. > > Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> > --- > drivers/usb/host/ehci-s5p.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c > index 20ebf6a..a464197 100644 > --- a/drivers/usb/host/ehci-s5p.c > +++ b/drivers/usb/host/ehci-s5p.c > @@ -92,6 +92,7 @@ static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci) > > static void s5p_setup_vbus_gpio(struct platform_device *pdev) > { > + struct device *dev = &pdev->dev; Hi Doug Anderson, Would you replace other '&pdev->dev' with 'dev' in s5p_setup_vbus_gpio() as below? It seems to be better for readability. - gpio = of_get_named_gpio(pdev->dev.of_node, + gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0); if (!gpio_is_valid(gpio)) return; - err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio"); + err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, + "ehci_vbus_gpio"); if (err) - dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio); + dev_err(dev, "can't request ehci vbus gpio %d", gpio); Best regards, Jingoo Han > int err; > int gpio; > > @@ -103,7 +104,8 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) > if (!gpio_is_valid(gpio)) > return; > > - err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio"); > + err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, > + "ehci_vbus_gpio"); > if (err) > dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio); > } > -- > 1.8.1.3 ÿ淸º{.nÇ+돴윯돪†+%듚ÿ깁負¥Šwÿº{.nÇ+돴¥Š{깸ëþ)í끾èw*jgП¨¶‰šŽ듶¢jÿ¾?G«앶ÿ◀◁¦j:+v돣ŠwèjØm¶Ÿÿ?®w?듺þf"·hš뤴얎ÿ녪¥