Pass usb-serial port to the control functions for uart status and work
mode.
Use port device for debugging and use dev_err to report errors.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/spcp8x5.c | 54 +++++++++++++++++++++++---------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index a5c3a36..5779dd8 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -198,21 +198,22 @@ static int spcp8x5_port_remove(struct usb_serial_port *port)
*
* NOTE: not supported by spcp825-007
*/
-static int spcp8x5_set_ctrl_line(struct usb_device *dev, u8 value,
- enum spcp8x5_type type)
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
int retval;
- u8 mcr = 0;
- if (type == SPCP825_007_TYPE)
+ if (priv->type == SPCP825_007_TYPE)
return -EPERM;
- mcr = (unsigned short)value;
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_UART_STATUS_TYPE, SET_UART_STATUS,
mcr, 0x04, NULL, 0, 100);
- if (retval != 0)
- dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
+ if (retval != 0) {
+ dev_err(&port->dev, "failed to set control lines: %d\n",
+ retval);
+ }
return retval;
}
@@ -221,15 +222,16 @@ static int spcp8x5_set_ctrl_line(struct usb_device *dev, u8 value,
*
* NOTE: not supported by spcp825-007
*/
-static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
- enum spcp8x5_type type)
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
u8 *status_buffer;
int ret;
/* I return Permited not support here but seem inval device
* is more fix */
- if (type == SPCP825_007_TYPE)
+ if (priv->type == SPCP825_007_TYPE)
return -EPERM;
if (status == NULL)
return -EINVAL;
@@ -243,10 +245,10 @@ static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
GET_UART_STATUS, GET_UART_STATUS_TYPE,
0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
if (ret < 0)
- dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
- status_buffer, ret);
+ dev_err(&port->dev, "failed to get modem status: %d", ret);
+
+ dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *status_buffer);
- dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer);
status[0] = status_buffer[0];
kfree(status_buffer);
@@ -258,23 +260,24 @@ static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
*
* NOTE: not supported by spcp825-007
*/
-static void spcp8x5_set_work_mode(struct usb_device *dev, u16 value,
- u16 index, enum spcp8x5_type type)
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+ u16 index)
{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
int ret;
/* I return Permited not support here but seem inval device
* is more fix */
- if (type == SPCP825_007_TYPE)
+ if (priv->type == SPCP825_007_TYPE)
return;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
value, index, NULL, 0, 100);
- dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
+ dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
if (ret < 0)
- dev_dbg(&dev->dev,
- "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
+ dev_err(&port->dev, "failed to set work mode: %d\n", ret);
}
static int spcp8x5_carrier_raised(struct usb_serial_port *port)
@@ -302,7 +305,7 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
| MCR_CONTROL_LINE_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrl_line(port->serial->dev, control, priv->type);
+ spcp8x5_set_ctrl_line(port, control);
}
static void spcp8x5_init_termios(struct tty_struct *tty)
@@ -342,7 +345,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrl_line(serial->dev, control , priv->type);
+ spcp8x5_set_ctrl_line(port, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -417,8 +420,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (cflag & CRTSCTS) {
/* enable hardware flow control */
- spcp8x5_set_work_mode(serial->dev, 0x000a,
- SET_WORKING_MODE_U2C, priv->type);
+ spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
}
}
@@ -441,13 +443,13 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
if (ret)
return ret;
- spcp8x5_set_ctrl_line(serial->dev, priv->line_control, priv->type);
+ spcp8x5_set_ctrl_line(port, priv->line_control);
/* Setup termios */
if (tty)
spcp8x5_set_termios(tty, port, &tmp_termios);
- spcp8x5_get_msr(serial->dev, &status, priv->type);
+ spcp8x5_get_msr(port, &status);
/* may be we should update uart status here but now we did not do */
spin_lock_irqsave(&priv->lock, flags);
@@ -479,7 +481,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty,
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- return spcp8x5_set_ctrl_line(port->serial->dev, control, priv->type);
+ return spcp8x5_set_ctrl_line(port, control);
}
static int spcp8x5_tiocmget(struct tty_struct *tty)
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
