Switch to the generic TIOCMIWAIT implementation which does not suffer
from the races involved when using the deprecated sleep_on functions.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/io_ti.c | 38 ++++----------------------------------
1 file changed, 4 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index db12f02..31897ba 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -86,9 +86,7 @@ struct edgeport_port {
int baud_rate;
int close_pending;
int lsr_event;
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while
- waiting for msr change to
- happen */
+
struct edgeport_serial *edge_serial;
struct usb_serial_port *port;
__u8 bUartMode; /* Port type, 0: RS232, etc. */
@@ -1458,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
icount->dcd++;
if (msr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
@@ -1752,8 +1750,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
dev = port->serial->dev;
- init_waitqueue_head(&edge_port->delta_msr_wait);
-
/* turn off loopback */
status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
if (status) {
@@ -2397,8 +2393,6 @@ static int edge_ioctl(struct tty_struct *tty,
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
- struct async_icount cnow;
- struct async_icount cprev;
dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
@@ -2407,30 +2401,6 @@ static int edge_ioctl(struct tty_struct *tty,
dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__);
return get_serial_info(edge_port,
(struct serial_struct __user *) arg);
- case TIOCMIWAIT:
- dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
- cprev = edge_port->port->icount;
- while (1) {
- interruptible_sleep_on(&edge_port->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (port->serial->disconnected)
- return -EIO;
-
- cnow = edge_port->port->icount;
-
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- return 0;
- }
- cprev = cnow;
- }
- /* not reached */
- break;
}
return -ENOIOCTLCMD;
}
@@ -2526,8 +2496,6 @@ static int edge_port_remove(struct usb_serial_port *port)
edge_port = usb_get_serial_port_data(port);
- wake_up_interruptible(&edge_port->delta_msr_wait);
-
edge_remove_sysfs_attrs(port);
kfifo_free(&edge_port->write_fifo);
kfree(edge_port);
@@ -2599,6 +2567,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.write = edge_write,
.write_room = edge_write_room,
@@ -2630,6 +2599,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.write = edge_write,
.write_room = edge_write_room,
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
