[PATCH 12/12] USB: ehci-omap: Fix detection in HSIC mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The HSIC devices need to be kept in reset while the EHCI controller
is being initialized and only brought out of reset after the
initialization is complete, else HSIC devices will not be detected.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
CC: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/host/ehci-omap.c |   28 +++++++++++-----------------
 1 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 1ba1df8..52a2d46 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -50,6 +50,7 @@
 #include <linux/usb/hcd.h>
 #include <linux/of.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 
 #include "ehci.h"
 
@@ -90,26 +91,13 @@ static inline u32 ehci_read(void __iomem *base, u32 reg)
 static int omap_ehci_init(struct usb_hcd *hcd)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
-	struct omap_hcd	*omap = (struct omap_hcd *)ehci->priv;
-	int rc, i;
-
-	/* Hold PHYs in reset while initializing EHCI controller */
-	for (i = 0; i < omap->nports; i++) {
-		if (omap->phy[i])
-			usb_phy_shutdown(omap->phy[i]);
-	}
+	int rc;
 
 	/* we know this is the memory we want, no need to ioremap again */
 	ehci->caps = hcd->regs;
 
 	rc = ehci_setup(hcd);
 
-	/* Bring PHYs out of reset */
-	for (i = 0; i < omap->nports; i++) {
-		if (omap->phy[i])
-			usb_phy_init(omap->phy[i]);
-	}
-
 	return rc;
 }
 
@@ -219,9 +207,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		}
 
 		omap->phy[i] = phy;
-		usb_phy_init(omap->phy[i]);
-		/* bring PHY out of suspend */
-		usb_phy_set_suspend(omap->phy[i], 0);
 	}
 
 	pm_runtime_enable(dev);
@@ -245,6 +230,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		goto err_pm_runtime;
 	}
 
+	/* Bring PHYs out of reset */
+	for (i = 0; i < omap->nports; i++) {
+		if (!omap->phy[i])
+			continue;
+
+		usb_phy_init(omap->phy[i]);
+		/* bring PHY out of suspend */
+		usb_phy_set_suspend(omap->phy[i], 0);
+	}
 
 	return 0;
 
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux