I have an internal card reader in my computer. Recently (not sure which kernel version), it has been registered with the OCHI bus on boot instead of EHCI, resulting in slow I/O speeds. Unplugging it (from the motherboard) and plugging it back in fixes the problem, but is quite a nuisance. All device drivers are compiled into the kernel; no modules are active. This used to work, though I can't tell you exactly what kernel version. On boot, lsusb shows: Bus 001 Device 006: ID 04f9:002e Brother Industries, Ltd Bus 001 Device 003: ID 03f0:2504 Hewlett-Packard DeskJet F4200 series Bus 005 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 006 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub After unplugging and plugging it back in: Bus 002 Device 007: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) dmesg, lspci -v, and lsusb -v (after replugging the device) are attached Kernel information: Linux version 3.8.2 (bruce@lorien) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #140 SMP Mon Mar 4 07:14:09 CST 2013 Environment: Linux lorien 3.8.2 #140 SMP Mon Mar 4 07:14:09 CST 2013 x86_64 AMD Phenom(tm) II X4 905e Processor AuthenticAMD GNU/Linux Gnu C 4.6.3 Gnu make 3.82 binutils 2.22 util-linux 2.22.2 mount debug module-init-tools found Linux C Library 2.15 Dynamic linker (ldd) 2.15 Procps 3.3.4 Net-tools 1.60_p20120127084908 Kbd 1.15.3wip oprofile 0.9.6 Sh-utils 8.20 Modules Loaded -- Bruce Guenter <bruce@xxxxxxxxxxxxxx> http://untroubled.org/
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.2 (bruce@lorien) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #140 SMP Mon Mar 4 07:14:09 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.2 root=/dev/sda1 ro vga=1 zcache [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfe9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe9e000-0x00000000cfedffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: MSI MS-7599/870-G45 (MS-7599), BIOS V10.6 10/22/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000430000000 aka 17152M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfe8ffff] [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x42fffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] [mem 0x400000000-0x42fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x42fffffff @ [mem 0xcfe8e000-0xcfe8ffff] [ 0.000000] ACPI: RSDP 00000000000fafd0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cfe90000 00040 (v01 7599MS A7599200 20101022 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 7599MS A7599200 20101022 MSFT 00000097) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598) [ 0.000000] ACPI: DSDT 00000000cfe905d0 09A8A (v01 A7599 A7599200 00000200 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cfe9e000 00040 [ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 7599MS A7599200 20101022 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 7599MS OEMMCFG 20101022 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfe9e040 00072 (v01 7599MS A7599200 20101022 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cfe9a060 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cfe9a150 00038 (v01 7599MS OEMHPET 20101022 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cfe9a190 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x42fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff] [ 0.000000] node 0: [mem 0x100000000-0x42fffffff] [ 0.000000] On node 0 totalpages: 4193823 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13243 pages used for memmap [ 0.000000] DMA32 zone: 834261 pages, LIFO batch:31 [ 0.000000] Normal zone: 52224 pages used for memmap [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: 6 Processors exceeds NR_CPUS limit of 4 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xcff00000-0xffefffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s78528 r8192 d23872 u524288 [ 0.000000] pcpu-alloc: s78528 r8192 d23872 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128286 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.2 root=/dev/sda1 ro vga=1 zcache [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] Memory: 16342780k/17563648k available (8503k kernel code, 788356k absent, 432512k reserved, 3576k data, 804k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 2500.341 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5002.04 BogoMIPS (lpj=8334470) [ 0.000082] pid_max: default: 32768 minimum: 301 [ 0.000149] Mount-cache hash table entries: 256 [ 0.000338] Initializing cgroup subsys cpuacct [ 0.000392] tseg: 0000000000 [ 0.000398] CPU: Physical Processor ID: 0 [ 0.000436] CPU: Processor Core ID: 0 [ 0.000474] mce: CPU supports 6 MCE banks [ 0.000515] LVT offset 0 assigned for vector 0xf9 [ 0.000556] process: using AMD E400 aware idle routine [ 0.000596] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 [ 0.000769] Freeing SMP alternatives: 32k freed [ 0.000817] ACPI: Core revision 20121018 [ 0.014548] ftrace: allocating 29436 entries in 115 pages [ 0.027608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060608] smpboot: CPU0: AMD Phenom(tm) II X4 905e Processor (fam: 10, model: 04, stepping: 03) [ 0.164449] Performance Events: AMD PMU driver. [ 0.164523] ... version: 0 [ 0.164560] ... bit width: 48 [ 0.164598] ... generic registers: 4 [ 0.164635] ... value mask: 0000ffffffffffff [ 0.164673] ... max period: 00007fffffffffff [ 0.164711] ... fixed-purpose events: 0 [ 0.164749] ... event mask: 000000000000000f [ 0.165720] MCE: In-kernel MCE decoding enabled. [ 0.179020] process: System has AMD C1E enabled [ 0.179107] process: Switch to broadcast mode on CPU1 [ 0.192181] process: Switch to broadcast mode on CPU2 [ 0.165823] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.205313] Brought up 4 CPUs [ 0.205328] process: Switch to broadcast mode on CPU3 [ 0.205427] smpboot: Total of 4 processors activated (20010.17 BogoMIPS) [ 0.209982] process: Switch to broadcast mode on CPU0 [ 0.210160] devtmpfs: initialized [ 0.210369] PM: Registering ACPI NVS region [mem 0xcfe9e000-0xcfedffff] (270336 bytes) [ 0.211407] NET: Registered protocol family 16 [ 0.211713] node 0 link 0: io port [1000, ffffff] [ 0.211715] TOM: 00000000d0000000 aka 3328M [ 0.211754] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.211757] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.211759] node 0 link 0: mmio [f0000000, ffffffff] [ 0.211761] node 0 link 0: mmio [a0000, bffff] [ 0.211762] node 0 link 0: mmio [d0000000, dfffffff] [ 0.211764] TOM2: 0000000430000000 aka 17152M [ 0.211802] bus: [bus 00-07] on node 0 link 0 [ 0.211803] bus: 00 [io 0x0000-0xffff] [ 0.211804] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.211805] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.211806] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.211806] bus: 00 [mem 0x430000000-0xfcffffffff] [ 0.211858] ACPI: bus type pci registered [ 0.211972] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.212015] PCI: not using MMCONFIG [ 0.212052] PCI: Using configuration type 1 for base access [ 0.212090] PCI: Using configuration type 1 for extended access [ 0.212305] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.212344] mtrr: probably your BIOS does not setup all CPUs. [ 0.212382] mtrr: corrected configuration. [ 0.219021] bio: create slab <bio-0> at 0 [ 0.219156] ACPI: Added _OSI(Module Device) [ 0.219194] ACPI: Added _OSI(Processor Device) [ 0.219232] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.219270] ACPI: Added _OSI(Processor Aggregator Device) [ 0.220265] ACPI: EC: Look up EC in DSDT [ 0.221726] ACPI: Executed 4 blocks of module-level executable AML code [ 0.229469] ACPI: Interpreter enabled [ 0.229510] ACPI: (supports S0 S3 S5) [ 0.229668] ACPI: Using IOAPIC for interrupt routing [ 0.229741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.231210] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.251227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.251455] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.251495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.251749] pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.251790] pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.252249] PCI host bridge to bus 0000:00 [ 0.252288] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.252328] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.252370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.252409] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.252449] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.252488] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.252528] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.252578] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 0.252591] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.252634] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.252673] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.252697] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.252734] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.252762] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.252782] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007] [ 0.252792] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] [ 0.252801] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007] [ 0.252811] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003] [ 0.252820] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] [ 0.252830] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff] [ 0.252890] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.252904] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff] [ 0.252972] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.252985] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff] [ 0.253059] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.253078] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff] [ 0.253166] pci 0000:00:12.2: supports D1 D2 [ 0.253167] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.253192] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.253206] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff] [ 0.253274] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.253287] pci 0000:00:13.1: reg 10: [mem 0xfe8f7000-0xfe8f7fff] [ 0.253362] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.253381] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff] [ 0.253469] pci 0000:00:13.2: supports D1 D2 [ 0.253470] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.253497] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.253602] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.253619] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.253629] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.253638] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.253647] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.253657] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.253718] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.253740] pci 0000:00:14.2: reg 10: [mem 0xfe8f0000-0xfe8f3fff 64bit] [ 0.253810] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.253825] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.253905] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.253949] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.253963] pci 0000:00:14.5: reg 10: [mem 0xfe8f6000-0xfe8f6fff] [ 0.254034] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.254055] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.254071] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.254088] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.254109] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.254165] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000 [ 0.254177] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.254187] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit] [ 0.254194] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff] [ 0.254207] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.254237] pci 0000:01:00.0: supports D1 D2 [ 0.254256] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300 [ 0.254269] pci 0000:01:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit] [ 0.254326] pci 0000:01:00.1: supports D1 D2 [ 0.259061] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.259105] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.259108] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.259111] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.259160] pci 0000:02:00.0: [1969:1063] type 00 class 0x020000 [ 0.259182] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.259193] pci 0000:02:00.0: reg 18: [io 0xd800-0xd87f] [ 0.259287] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.265720] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.265763] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.265765] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.265812] pci 0000:03:06.0: [8086:100e] type 00 class 0x020000 [ 0.265839] pci 0000:03:06.0: reg 10: [mem 0xfebe0000-0xfebfffff] [ 0.265851] pci 0000:03:06.0: reg 14: [mem 0xfebc0000-0xfebdffff] [ 0.265863] pci 0000:03:06.0: reg 18: [io 0xe800-0xe83f] [ 0.265909] pci 0000:03:06.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.265973] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold [ 0.266032] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.266074] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] [ 0.266077] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.266081] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.266083] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.266085] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.266086] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.266087] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.266089] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.266100] pci_bus 0000:00: on NUMA node 0 [ 0.266119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.266188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.266256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.266368] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.276001] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.276426] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.276844] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.277261] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.277678] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.278164] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.278582] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.279012] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.279604] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.279644] vgaarb: loaded [ 0.279681] vgaarb: bridge control possible 0000:01:00.0 [ 0.279822] SCSI subsystem initialized [ 0.279860] ACPI: bus type scsi registered [ 0.280001] libata version 3.00 loaded. [ 0.280006] ACPI: bus type usb registered [ 0.280096] usbcore: registered new interface driver usbfs [ 0.280161] usbcore: registered new interface driver hub [ 0.280238] usbcore: registered new device driver usb [ 0.280428] Advanced Linux Sound Architecture Driver Initialized. [ 0.280467] PCI: Using ACPI for IRQ routing [ 0.289777] PCI: pci_cache_line_size set to 64 bytes [ 0.289784] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.289887] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.289889] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff] [ 0.290099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.290311] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.292372] Switching to clocksource hpet [ 0.296486] FS-Cache: Loaded [ 0.296638] CacheFiles: Loaded [ 0.296726] pnp: PnP ACPI init [ 0.296769] ACPI: bus type pnp registered [ 0.296885] pnp 00:00: [dma 4] [ 0.296945] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.297019] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.297080] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.297142] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.297599] pnp 00:04: [dma 0 disabled] [ 0.297727] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.298016] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.298266] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.298307] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.298347] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298791] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.298831] system 00:07: [io 0x040b] has been reserved [ 0.299536] system 00:07: [io 0x04d6] has been reserved [ 0.299575] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.299614] system 00:07: [io 0x0c14] has been reserved [ 0.299653] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.299693] system 00:07: [io 0x0c52] has been reserved [ 0.299732] system 00:07: [io 0x0c6c] has been reserved [ 0.299771] system 00:07: [io 0x0c6f] has been reserved [ 0.299810] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.299849] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.299889] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.299928] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.299967] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.300007] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.300046] system 00:07: [io 0x0b00-0x0b0f] has been reserved [ 0.300085] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.300125] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.300164] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.300204] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.300244] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.300284] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.300324] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300464] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.300741] system 00:09: [io 0x0600-0x06df] has been reserved [ 0.300780] system 00:09: [io 0x0ae0-0x0aef] has been reserved [ 0.300820] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300962] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.301003] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301277] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.301322] pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.301366] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.301410] pnp 00:0b: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.301546] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.301586] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.301768] pnp: PnP ACPI: found 12 devices [ 0.301806] ACPI: ACPI bus type pnp unregistered [ 0.311292] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.311333] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.311374] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.311414] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.311456] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.311495] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.311536] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.311578] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.311618] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] [ 0.311660] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.311724] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.311726] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.311728] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.311729] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.311731] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.311732] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.311734] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.311735] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.311737] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.311739] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.311740] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.311742] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.311744] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.311745] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.311747] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.311748] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.311750] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.311751] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.311753] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.311780] NET: Registered protocol family 2 [ 0.311927] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.312564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.312901] TCP: Hash tables configured (established 131072 bind 65536) [ 0.312977] TCP: reno registered [ 0.313017] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.313147] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.313316] NET: Registered protocol family 1 [ 0.313465] RPC: Registered named UNIX socket transport module. [ 0.313504] RPC: Registered udp transport module. [ 0.313542] RPC: Registered tcp transport module. [ 0.313580] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.745250] pci 0000:01:00.0: Boot video device [ 0.745261] PCI: CLS 64 bytes, default 64 [ 0.745597] PCI-DMA: Disabling AGP. [ 0.745711] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.745749] PCI-DMA: using GART IOMMU. [ 0.745788] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.749645] kvm: Nested Virtualization enabled [ 0.749691] kvm: Nested Paging enabled [ 0.749999] LVT offset 1 assigned for vector 0x400 [ 0.750045] IBS: LVT offset 1 assigned [ 0.750105] perf: AMD IBS detected (0x0000001f) [ 0.750230] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.750473] audit: initializing netlink socket (disabled) [ 0.750524] type=2000 audit(1362403632.643:1): initialized [ 0.755442] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.755634] FS-Cache: Netfs 'nfs' registered for caching [ 0.755913] NFS: Registering the id_resolver key type [ 0.755961] Key type id_resolver registered [ 0.755999] Key type id_legacy registered [ 0.756044] NTFS driver 2.1.30 [Flags: R/O]. [ 0.756183] fuse init (API version 7.20) [ 0.756779] Btrfs loaded [ 0.756964] ceph: loaded (mds proto 32) [ 0.757005] msgmni has been set to 32048 [ 0.757618] NET: Registered protocol family 38 [ 0.757744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.757784] io scheduler noop registered [ 0.757875] io scheduler cfq registered (default) [ 0.758026] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.758117] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 0.758459] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.758506] ACPI: Power Button [PWRB] [ 0.758612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.758652] ACPI: Power Button [PWRF] [ 0.758826] ACPI: processor limited to max C-state 1 [ 0.763112] GHES: HEST is not enabled! [ 0.794464] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.815112] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.815806] Real Time Clock Driver v1.12b [ 0.816066] Linux agpgart interface v0.103 [ 0.816199] [drm] Initialized drm 1.1.0 20060810 [ 0.816283] [drm] radeon defaulting to kernel modesetting. [ 0.816322] [drm] radeon kernel modesetting enabled. [ 0.816612] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x0374). [ 0.816674] [drm] register mmio base: 0xFE9E0000 [ 0.816712] [drm] register mmio size: 131072 [ 0.817444] ATOM BIOS: 68F9.12.19.0.2.AS01 [ 0.817555] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 0.817598] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 0.822098] [drm] Detected VRAM RAM=512M, BAR=256M [ 0.822145] [drm] RAM width 64bits DDR [ 0.822256] [TTM] Zone kernel: Available graphics memory: 8204382 kiB [ 0.822295] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 0.822334] [TTM] Initializing pool allocator [ 0.822374] [TTM] Initializing DMA pool allocator [ 0.822435] [drm] radeon: 512M of VRAM memory ready [ 0.822473] [drm] radeon: 512M of GTT memory ready. [ 0.822522] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.822560] [drm] Driver supports precise vblank timestamp query. [ 0.822637] radeon 0000:01:00.0: irq 42 for MSI/MSI-X [ 0.822646] radeon 0000:01:00.0: radeon: using MSI. [ 0.822706] [drm] radeon: irq initialized. [ 0.822747] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.823451] [drm] probing gen 2 caps for device 1002:5978 = 2/0 [ 0.823491] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 0.823657] [drm] Loading CEDAR Microcode [ 0.850528] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 0.850652] radeon 0000:01:00.0: WB enabled [ 0.850688] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88041c716c00 [ 0.850728] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88041c716c0c [ 0.866941] [drm] ring test on 0 succeeded in 1 usecs [ 0.867032] [drm] ring test on 3 succeeded in 1 usecs [ 0.867141] [drm] ib test on ring 0 succeeded in 0 usecs [ 0.867195] [drm] ib test on ring 3 succeeded in 0 usecs [ 0.867882] [drm] Radeon Display Connectors [ 0.867917] [drm] Connector 0: [ 0.867951] [drm] HDMI-A-1 [ 0.867985] [drm] HPD1 [ 0.868020] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 0.868056] [drm] Encoders: [ 0.868090] [drm] DFP1: INTERNAL_UNIPHY1 [ 0.868125] [drm] Connector 1: [ 0.868159] [drm] DVI-I-1 [ 0.868194] [drm] HPD4 [ 0.868228] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 0.868264] [drm] Encoders: [ 0.868324] [drm] DFP2: INTERNAL_UNIPHY [ 0.868362] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.868397] [drm] Connector 2: [ 0.868431] [drm] VGA-1 [ 0.868466] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 0.868501] [drm] Encoders: [ 0.868536] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 0.868607] [drm] Internal thermal controller without fan control [ 0.868697] [drm] radeon: power management initialized [ 0.980570] [drm] fb mappable at 0xD0142000 [ 0.980606] [drm] vram apper at 0xD0000000 [ 0.980641] [drm] size 9216000 [ 0.980675] [drm] fb depth is 24 [ 0.980709] [drm] pitch is 7680 [ 0.980866] fbcon: radeondrmfb (fb0) is primary device [ 1.236118] Console: switching to colour frame buffer device 200x67 [ 1.241486] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 1.241512] radeon 0000:01:00.0: registered panic notifier [ 1.241538] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0 [ 1.242870] loop: module loaded [ 1.243239] ahci 0000:00:11.0: version 3.0 [ 1.243362] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.243399] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.244631] scsi0 : ahci [ 1.244765] scsi1 : ahci [ 1.244887] scsi2 : ahci [ 1.245009] scsi3 : ahci [ 1.245130] scsi4 : ahci [ 1.245252] scsi5 : ahci [ 1.245352] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22 [ 1.245384] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22 [ 1.245416] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22 [ 1.245448] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22 [ 1.245480] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22 [ 1.245511] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22 [ 1.245940] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.246449] scsi6 : pata_atiixp [ 1.247364] scsi7 : pata_atiixp [ 1.248129] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.248159] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.248419] tun: Universal TUN/TAP device driver, 1.6 [ 1.248439] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 1.271485] atl1c 0000:02:00.0: version 1.0.1.1-NAPI [ 1.271547] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.271577] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.450302] ata7.00: HPA detected: current 156299375, native 156301488 [ 1.450335] ata7.00: ATA-7: ST3802110A, 3.AAJ, max UDMA/100 [ 1.450357] ata7.00: 156299375 sectors, multi 16: LBA48 [ 1.516762] ata7.00: configured for UDMA/100 [ 1.556897] e1000 0000:03:06.0 eth1: (PCI:33MHz:32-bit) 00:07:29:10:0c:78 [ 1.556932] e1000 0000:03:06.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.557037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.557065] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.557074] ehci-pci: EHCI PCI platform driver [ 1.557113] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.557138] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.557174] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.557221] ehci-pci 0000:00:12.2: debug port 1 [ 1.557242] ehci-pci 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 1.557246] ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.557262] ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.557270] ehci-pci 0000:00:12.2: MWI active [ 1.557271] ehci-pci 0000:00:12.2: supports USB remote wakeup [ 1.557291] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 1.557318] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.564025] ata3: SATA link down (SStatus 0 SControl 300) [ 1.565161] ata4: SATA link down (SStatus 0 SControl 300) [ 1.566295] ata2: SATA link down (SStatus 0 SControl 300) [ 1.567415] ata5: SATA link down (SStatus 0 SControl 300) [ 1.568508] ata6: SATA link down (SStatus 0 SControl 300) [ 1.568511] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.568530] usb usb1: default language 0x0409 [ 1.568535] usb usb1: udev 1, busnum 1, minor = 0 [ 1.568537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.568538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.568539] usb usb1: Product: EHCI Host Controller [ 1.568540] usb usb1: Manufacturer: Linux 3.8.2 ehci_hcd [ 1.568542] usb usb1: SerialNumber: 0000:00:12.2 [ 1.568656] usb usb1: usb_probe_device [ 1.568658] usb usb1: configuration #1 chosen from 1 choice [ 1.568664] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.568708] hub 1-0:1.0: usb_probe_interface [ 1.568710] hub 1-0:1.0: usb_probe_interface - got id [ 1.568711] hub 1-0:1.0: USB hub found [ 1.568714] hub 1-0:1.0: 6 ports detected [ 1.568715] hub 1-0:1.0: standalone hub [ 1.568716] hub 1-0:1.0: no power switching (usb 1.0) [ 1.568717] hub 1-0:1.0: individual port over-current protection [ 1.568718] hub 1-0:1.0: power on to power good time: 20ms [ 1.568721] hub 1-0:1.0: local power source is good [ 1.568749] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.568812] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.568817] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.568819] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.568831] ehci-pci 0000:00:13.2: debug port 1 [ 1.568834] ehci-pci 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 1.568837] ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.568851] ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.568859] ehci-pci 0000:00:13.2: MWI active [ 1.568860] ehci-pci 0000:00:13.2: supports USB remote wakeup [ 1.568871] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 1.568876] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.583372] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.583952] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.583989] usb usb2: default language 0x0409 [ 1.583993] usb usb2: udev 1, busnum 2, minor = 128 [ 1.583994] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.583995] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.583996] usb usb2: Product: EHCI Host Controller [ 1.583997] usb usb2: Manufacturer: Linux 3.8.2 ehci_hcd [ 1.583998] usb usb2: SerialNumber: 0000:00:13.2 [ 1.584106] usb usb2: usb_probe_device [ 1.584108] usb usb2: configuration #1 chosen from 1 choice [ 1.584115] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.584168] hub 2-0:1.0: usb_probe_interface [ 1.584169] hub 2-0:1.0: usb_probe_interface - got id [ 1.584171] hub 2-0:1.0: USB hub found [ 1.584173] hub 2-0:1.0: 6 ports detected [ 1.584174] hub 2-0:1.0: standalone hub [ 1.584175] hub 2-0:1.0: no power switching (usb 1.0) [ 1.584176] hub 2-0:1.0: individual port over-current protection [ 1.584177] hub 2-0:1.0: power on to power good time: 20ms [ 1.584179] hub 2-0:1.0: local power source is good [ 1.584207] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.584294] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.584294] ohci_hcd: block sizes: ed 80 td 96 [ 1.584318] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.584322] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.584336] ohci_hcd 0000:00:12.0: created debug files [ 1.584337] ohci_hcd 0000:00:12.0: supports USB remote wakeup [ 1.584349] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 1.598692] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS90, HN00S300, max UDMA/100 [ 1.606025] ata1.00: configured for UDMA/100 [ 1.613247] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS90 HN00 PQ: 0 ANSI: 5 [ 1.621638] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.622782] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.624105] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.624253] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.625662] scsi 6:0:0:0: Direct-Access ATA ST3802110A 3.AA PQ: 0 ANSI: 5 [ 1.627215] sd 6:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.627293] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1.629786] sd 6:0:0:0: [sda] Write Protect is off [ 1.631051] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.631066] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.641258] ohci_hcd 0000:00:12.0: OHCI controller state [ 1.641262] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.641265] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.641268] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.641271] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF [ 1.641275] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.641283] ohci_hcd 0000:00:12.0: hcca frame #0005 [ 1.641287] ohci_hcd 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3) [ 1.641289] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.641292] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE [ 1.641296] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.641299] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.641302] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.641310] usb usb3: default language 0x0409 [ 1.641314] usb usb3: udev 1, busnum 3, minor = 256 [ 1.641316] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.642627] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.643933] usb usb3: Product: OHCI Host Controller [ 1.645219] usb usb3: Manufacturer: Linux 3.8.2 ohci_hcd [ 1.646519] usb usb3: SerialNumber: 0000:00:12.0 [ 1.647931] usb usb3: usb_probe_device [ 1.647933] usb usb3: configuration #1 chosen from 1 choice [ 1.647938] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.647984] hub 3-0:1.0: usb_probe_interface [ 1.647985] hub 3-0:1.0: usb_probe_interface - got id [ 1.647987] hub 3-0:1.0: USB hub found [ 1.649284] hub 3-0:1.0: 3 ports detected [ 1.650568] hub 3-0:1.0: standalone hub [ 1.650570] hub 3-0:1.0: no power switching (usb 1.0) [ 1.650571] hub 3-0:1.0: no over-current protection [ 1.650572] hub 3-0:1.0: power on to power good time: 4ms [ 1.650576] hub 3-0:1.0: local power source is good [ 1.650590] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.650617] ehci-pci 0000:00:12.2: HS companion for 0000:00:12.0 [ 1.650640] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.651923] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.653221] ohci_hcd 0000:00:12.1: created debug files [ 1.653222] ohci_hcd 0000:00:12.1: supports USB remote wakeup [ 1.653226] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 1.656676] sda: sda1 sda2 sda3 [ 1.658451] sd 6:0:0:0: [sda] Attached SCSI disk [ 1.667206] ehci-pci 0000:00:12.2: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.667209] hub 1-0:1.0: port 3: status 0501 change 0001 [ 1.667218] ehci-pci 0000:00:12.2: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.667220] hub 1-0:1.0: port 5: status 0501 change 0001 [ 1.683850] ehci-pci 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.683853] hub 2-0:1.0: port 2: status 0501 change 0001 [ 1.683860] ehci-pci 0000:00:13.2: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.683861] hub 2-0:1.0: port 3: status 0501 change 0001 [ 1.683868] ehci-pci 0000:00:13.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.683870] hub 2-0:1.0: port 4: status 0501 change 0001 [ 1.711145] ohci_hcd 0000:00:12.1: OHCI controller state [ 1.711149] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers, rh state running [ 1.711152] ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3 [ 1.711155] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0 [ 1.711158] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF [ 1.711161] ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.711169] ohci_hcd 0000:00:12.1: hcca frame #0005 [ 1.711172] ohci_hcd 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3) [ 1.711175] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.711178] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE [ 1.711181] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS [ 1.711184] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS [ 1.711187] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS [ 1.711194] usb usb4: default language 0x0409 [ 1.711199] usb usb4: udev 1, busnum 4, minor = 384 [ 1.711200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.712493] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.713769] usb usb4: Product: OHCI Host Controller [ 1.715037] usb usb4: Manufacturer: Linux 3.8.2 ohci_hcd [ 1.716297] usb usb4: SerialNumber: 0000:00:12.1 [ 1.717682] usb usb4: usb_probe_device [ 1.717684] usb usb4: configuration #1 chosen from 1 choice [ 1.717689] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.717733] hub 4-0:1.0: usb_probe_interface [ 1.717735] hub 4-0:1.0: usb_probe_interface - got id [ 1.717736] hub 4-0:1.0: USB hub found [ 1.718982] hub 4-0:1.0: 3 ports detected [ 1.720209] hub 4-0:1.0: standalone hub [ 1.720210] hub 4-0:1.0: no power switching (usb 1.0) [ 1.720211] hub 4-0:1.0: no over-current protection [ 1.720212] hub 4-0:1.0: power on to power good time: 4ms [ 1.720216] hub 4-0:1.0: local power source is good [ 1.720230] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.720254] ehci-pci 0000:00:12.2: HS companion for 0000:00:12.1 [ 1.720277] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.721522] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.722783] ohci_hcd 0000:00:13.0: created debug files [ 1.722785] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.722796] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 1.750419] tsc: Refined TSC clocksource calibration: 2500.103 MHz [ 1.750432] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 1.751687] Switching to clocksource tsc [ 1.767042] hub 1-0:1.0: state 7 ports 6 chg 0028 evt 0000 [ 1.767049] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.781031] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.781035] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.781038] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.781041] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.781044] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 1.781047] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.781056] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 1.781059] ohci_hcd 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3) [ 1.781062] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.781064] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.781068] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.781070] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.781073] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.781086] usb usb5: default language 0x0409 [ 1.781090] usb usb5: udev 1, busnum 5, minor = 512 [ 1.781092] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.782368] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.783639] usb usb5: Product: OHCI Host Controller [ 1.784917] usb usb5: Manufacturer: Linux 3.8.2 ohci_hcd [ 1.786210] usb usb5: SerialNumber: 0000:00:13.0 [ 1.787642] usb usb5: usb_probe_device [ 1.787645] usb usb5: configuration #1 chosen from 1 choice [ 1.787652] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.787695] hub 5-0:1.0: usb_probe_interface [ 1.787697] hub 5-0:1.0: usb_probe_interface - got id [ 1.787699] hub 5-0:1.0: USB hub found [ 1.789024] hub 5-0:1.0: 3 ports detected [ 1.790307] hub 5-0:1.0: standalone hub [ 1.790308] hub 5-0:1.0: no power switching (usb 1.0) [ 1.790310] hub 5-0:1.0: no over-current protection [ 1.790311] hub 5-0:1.0: power on to power good time: 4ms [ 1.790315] hub 5-0:1.0: local power source is good [ 1.790331] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.790357] ehci-pci 0000:00:13.2: HS companion for 0000:00:13.0 [ 1.790381] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.791679] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.792982] ohci_hcd 0000:00:13.1: created debug files [ 1.792983] ohci_hcd 0000:00:13.1: supports USB remote wakeup [ 1.792987] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000 [ 1.820315] ehci-pci 0000:00:12.2: port 3 reset complete, port enabled [ 1.820320] ehci-pci 0000:00:12.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.850943] ohci_hcd 0000:00:13.1: OHCI controller state [ 1.850947] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers, rh state running [ 1.850951] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3 [ 1.850954] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 [ 1.850957] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF [ 1.850960] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.850969] ohci_hcd 0000:00:13.1: hcca frame #0005 [ 1.850972] ohci_hcd 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3) [ 1.850974] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.850977] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE [ 1.850980] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS [ 1.850983] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS [ 1.850986] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS [ 1.850994] usb usb6: default language 0x0409 [ 1.850998] usb usb6: udev 1, busnum 6, minor = 640 [ 1.851000] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.852308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.853614] usb usb6: Product: OHCI Host Controller [ 1.854922] usb usb6: Manufacturer: Linux 3.8.2 ohci_hcd [ 1.856228] usb usb6: SerialNumber: 0000:00:13.1 [ 1.857639] usb usb6: usb_probe_device [ 1.857641] usb usb6: configuration #1 chosen from 1 choice [ 1.857646] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.857680] hub 6-0:1.0: usb_probe_interface [ 1.857681] hub 6-0:1.0: usb_probe_interface - got id [ 1.857683] hub 6-0:1.0: USB hub found [ 1.858973] hub 6-0:1.0: 3 ports detected [ 1.860245] hub 6-0:1.0: standalone hub [ 1.860246] hub 6-0:1.0: no power switching (usb 1.0) [ 1.860247] hub 6-0:1.0: no over-current protection [ 1.860248] hub 6-0:1.0: power on to power good time: 4ms [ 1.860252] hub 6-0:1.0: local power source is good [ 1.860266] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.860288] ehci-pci 0000:00:13.2: HS companion for 0000:00:13.1 [ 1.860311] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.861597] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.862898] ohci_hcd 0000:00:14.5: created debug files [ 1.862899] ohci_hcd 0000:00:14.5: supports USB remote wakeup [ 1.862904] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8f6000 [ 1.873558] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.920846] ohci_hcd 0000:00:14.5: OHCI controller state [ 1.920849] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.920853] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 [ 1.920856] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.920858] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF [ 1.920861] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.920870] ohci_hcd 0000:00:14.5: hcca frame #0005 [ 1.920873] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) [ 1.920876] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.920878] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE [ 1.920882] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.920884] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.920892] usb usb7: default language 0x0409 [ 1.920896] usb usb7: udev 1, busnum 7, minor = 768 [ 1.920898] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.922193] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.923478] usb usb7: Product: OHCI Host Controller [ 1.924771] usb usb7: Manufacturer: Linux 3.8.2 ohci_hcd [ 1.926054] usb usb7: SerialNumber: 0000:00:14.5 [ 1.927382] ehci-pci 0000:00:12.2: port 3 reset complete, port enabled [ 1.927386] ehci-pci 0000:00:12.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.927446] usb usb7: usb_probe_device [ 1.927448] usb usb7: configuration #1 chosen from 1 choice [ 1.927453] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.927487] hub 7-0:1.0: usb_probe_interface [ 1.927488] hub 7-0:1.0: usb_probe_interface - got id [ 1.927489] hub 7-0:1.0: USB hub found [ 1.928777] hub 7-0:1.0: 2 ports detected [ 1.930045] hub 7-0:1.0: standalone hub [ 1.930046] hub 7-0:1.0: no power switching (usb 1.0) [ 1.930047] hub 7-0:1.0: no over-current protection [ 1.930048] hub 7-0:1.0: power on to power good time: 4ms [ 1.930051] hub 7-0:1.0: local power source is good [ 1.930062] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.930145] uhci_hcd: USB Universal Host Controller Interface driver [ 1.931503] Initializing USB Mass Storage driver... [ 1.932863] usbcore: registered new interface driver usb-storage [ 1.934156] USB Mass Storage support registered. [ 1.935528] usbcore: registered new interface driver usbserial [ 1.936861] usbcore: registered new interface driver usbserial_generic [ 1.938178] usbserial: USB Serial support registered for generic [ 1.939486] usbcore: registered new interface driver visor [ 1.940787] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 1.942103] usbserial: USB Serial support registered for Sony Clie 5.0 [ 1.943398] usbserial: USB Serial support registered for Sony Clie 3.5 [ 1.944720] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.945937] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.947424] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.948855] mousedev: PS/2 mouse device common for all mice [ 1.950354] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 1.951713] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251) [ 1.953013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.954431] f71882fg: Found f71889fg chip at 0x600, revision 21 [ 1.955817] ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20121018/utaddress-251) [ 1.957199] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.958761] md: raid1 personality registered for level 1 [ 1.960292] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@xxxxxxxxxx [ 1.961808] EDAC MC: Ver: 3.0.0 [ 1.963405] AMD64 EDAC driver v3.4.0 [ 1.964839] EDAC amd64: DRAM ECC disabled. [ 1.966269] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 1.970694] cpuidle: using governor ladder [ 1.972153] cpuidle: using governor menu [ 1.973683] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.974162] usbcore: registered new interface driver usbhid [ 1.974162] usbhid: USB HID core driver [ 1.974226] zcache: using lzo compressor [ 1.974388] zcache: cleancache enabled using kernel transcendent memory and compression buddies [ 1.974389] zcache: frontswap enabled using kernel transcendent memory and zsmalloc [ 2.004606] usb 1-3: default language 0x0409 [ 2.004809] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 2.005353] usb 1-3: udev 2, busnum 1, minor = 1 [ 2.005354] usb 1-3: New USB device found, idVendor=04f9, idProduct=002e [ 2.005356] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.005357] usb 1-3: Product: HL-4040CN [ 2.005358] usb 1-3: Manufacturer: Brother [ 2.005359] usb 1-3: SerialNumber: 000G7J181952 [ 2.005478] usb 1-3: usb_probe_device [ 2.005480] usb 1-3: configuration #1 chosen from 1 choice [ 2.005604] usb 1-3: adding 1-3:1.0 (config #1, interface 0) [ 2.005685] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 2.014076] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 2.015751] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 2.017445] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 2.019147] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 2.020861] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 2.022554] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 2.024252] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 2.026644] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X [ 2.029552] oprofile: AMD IBS detected (0x0000001f) [ 2.031132] oprofile: using NMI interrupt. [ 2.032769] TCP: cubic registered [ 2.034334] Initializing XFRM netlink socket [ 2.036092] NET: Registered protocol family 10 [ 2.037834] NET: Registered protocol family 17 [ 2.040053] sctp: Hash tables configured (established 65536 bind 65536) [ 2.041795] Key type dns_resolver registered [ 2.043366] Key type ceph registered [ 2.044917] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 2.046952] registered taskstats version 1 [ 2.048966] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 2.050723] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.052503] ALSA device list: [ 2.054089] #0: HDA ATI SB at 0xfe8f0000 irq 16 [ 2.055679] #1: HD-Audio Generic at 0xfe9bc000 irq 43 [ 2.056641] ehci-pci 0000:00:12.2: port 5 reset complete, port enabled [ 2.056645] ehci-pci 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.057320] md: Waiting for all devices to be available before autodetect [ 2.058932] md: If you don't use raid, use raid=noautodetect [ 2.060743] md: Autodetecting RAID arrays. [ 2.062359] md: Scanned 0 and added 0 devices. [ 2.063953] md: autorun ... [ 2.065516] md: ... autorun DONE. [ 2.067345] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 2.069180] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 2.088459] zcache: created ephemeral tmem pool, id=0, client=65535 [ 2.090097] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.091700] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 2.109885] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 2.112641] devtmpfs: mounted [ 2.115120] Freeing unused kernel memory: 804k freed [ 2.163168] ehci-pci 0000:00:12.2: port 5 reset complete, port enabled [ 2.163172] ehci-pci 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.233858] usb 1-5: default language 0x0409 [ 2.234231] usb 1-5: udev 3, busnum 1, minor = 2 [ 2.234233] usb 1-5: New USB device found, idVendor=03f0, idProduct=2504 [ 2.235828] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.237448] usb 1-5: Product: Deskjet F4200 series [ 2.239022] usb 1-5: Manufacturer: HP [ 2.240548] usb 1-5: SerialNumber: CN8AE2R09V05BR [ 2.256368] usb 1-5: usb_probe_device [ 2.256371] usb 1-5: configuration #1 chosen from 1 choice [ 2.257229] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 2.257324] usb 1-5: adding 1-5:1.1 (config #1, interface 1) [ 2.257377] usb 1-5: adding 1-5:1.2 (config #1, interface 2) [ 2.257443] hub 2-0:1.0: state 7 ports 6 chg 001c evt 0000 [ 2.257448] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 2.309601] ehci-pci 0000:00:13.2: port 2 reset complete, port enabled [ 2.309605] ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.362850] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 2.416136] ehci-pci 0000:00:13.2: port 2 reset complete, port enabled [ 2.416140] ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.487400] usb 2-2: default language 0x0409 [ 2.488147] usb 2-2: udev 2, busnum 2, minor = 129 [ 2.488149] usb 2-2: New USB device found, idVendor=0fca, idProduct=8004 [ 2.489620] usb 2-2: New USB device strings: Mfr=1, Product=5, SerialNumber=3 [ 2.491047] usb 2-2: Product: RIM Composite Device [ 2.492453] usb 2-2: Manufacturer: Research In Motion [ 2.493866] usb 2-2: SerialNumber: 65FA15CD26C5EB4913F2DA4360411CAEBE1B1DB4 [ 2.495429] usb 2-2: usb_probe_device [ 2.495431] usb 2-2: configuration #1 chosen from 1 choice [ 2.514140] usb 2-2: adding 2-2:1.0 (config #1, interface 0) [ 2.514458] usb 2-2: adding 2-2:1.1 (config #1, interface 1) [ 2.514638] usb-storage 2-2:1.1: usb_probe_interface [ 2.514642] usb-storage 2-2:1.1: usb_probe_interface - got id [ 2.514682] scsi8 : usb-storage 2-2:1.1 [ 2.516239] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 2.569228] ehci-pci 0000:00:13.2: port 3 reset complete, port enabled [ 2.569232] ehci-pci 0000:00:13.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.622450] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 3.178377] ehci-pci 0000:00:13.2: port 3 reset complete, port enabled [ 3.178381] ehci-pci 0000:00:13.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.307576] usb 2-3: default language 0x0409 [ 3.313089] usb 2-3: udev 3, busnum 2, minor = 130 [ 3.313092] usb 2-3: New USB device found, idVendor=0bda, idProduct=0151 [ 3.314507] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.315903] usb 2-3: Product: USB2.0-CRW [ 3.317284] usb 2-3: Manufacturer: Generic [ 3.318647] usb 2-3: SerialNumber: 20060413092100000 [ 3.320099] usb 2-3: usb_probe_device [ 3.320101] usb 2-3: configuration #1 chosen from 1 choice [ 3.320679] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 3.321523] usb-storage 2-3:1.0: usb_probe_interface [ 3.321527] usb-storage 2-3:1.0: usb_probe_interface - got id [ 3.321566] scsi9 : usb-storage 2-3:1.0 [ 3.323043] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 3.378076] ehci-pci 0000:00:13.2: port 4 full speed --> companion [ 3.378080] ehci-pci 0000:00:13.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 3.378112] hub 2-0:1.0: port 4 not reset yet, waiting 50ms [ 3.431325] ehci-pci 0000:00:13.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.431343] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 3.431345] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 3.431347] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0002 [ 3.431352] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS [ 3.431355] hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 3.519248] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [ 3.520925] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 3.522496] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 3.551171] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 3.617737] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 3.670993] usb 6-1: new full-speed USB device number 2 using ohci_hcd [ 3.737534] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 3.807423] usb 6-1: ep0 maxpacket = 8 [ 3.818056] usb 6-1: skipped 1 descriptor after interface [ 3.818059] usb 6-1: skipped 1 descriptor after interface [ 3.818060] usb 6-1: skipped 1 descriptor after interface [ 3.820050] usb 6-1: default language 0x0409 [ 3.824037] usb 6-1: udev 2, busnum 6, minor = 641 [ 3.824040] usb 6-1: New USB device found, idVendor=046d, idProduct=c52b [ 3.825391] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.826722] usb 6-1: Product: USB Receiver [ 3.828037] usb 6-1: Manufacturer: Logitech [ 3.829437] usb 6-1: usb_probe_device [ 3.829439] usb 6-1: configuration #1 chosen from 1 choice [ 3.832034] usb 6-1: adding 6-1:1.0 (config #1, interface 0) [ 3.832113] usbhid 6-1:1.0: usb_probe_interface [ 3.832115] usbhid 6-1:1.0: usb_probe_interface - got id [ 3.836138] usb 6-1: adding 6-1:1.1 (config #1, interface 1) [ 3.836179] usbhid 6-1:1.1: usb_probe_interface [ 3.836181] usbhid 6-1:1.1: usb_probe_interface - got id [ 3.841076] usb 6-1: adding 6-1:1.2 (config #1, interface 2) [ 3.841114] usbhid 6-1:1.2: usb_probe_interface [ 3.841116] usbhid 6-1:1.2: usb_probe_interface - got id [ 3.850064] usbhid 6-1:1.2: looking for a minor, starting at 96 [ 3.850166] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-1/input2 [ 3.854048] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.854050] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 3.854056] ehci-pci 0000:00:13.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.854062] hub 2-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 3.856241] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input12 [ 3.857995] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:13.1-1:1 [ 3.973860] hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 3.973864] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0002 [ 4.329817] scsi 9:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 4.331604] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 4.340552] scsi 9:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 4.342298] sd 9:0:0:1: Attached scsi generic sg4 type 0 [ 4.352033] scsi 9:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 4.353789] sd 9:0:0:2: Attached scsi generic sg5 type 0 [ 4.356540] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 4.364264] scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 4.366040] sd 9:0:0:3: Attached scsi generic sg6 type 0 [ 4.368752] sd 9:0:0:1: [sdd] Attached SCSI removable disk [ 4.370999] sd 9:0:0:2: [sde] Attached SCSI removable disk [ 4.372619] sd 9:0:0:3: [sdf] Attached SCSI removable disk [ 6.002660] systemd-udevd[1913]: starting version 197 [ 10.008140] usb 2-2: usbfs: interface 1 claimed by usb-storage while 'bcharge' sets config #1 [ 10.008146] usb 2-2: usbfs: interface 1 claimed by usb-storage while 'bcharge' sets config #1 [ 10.491292] ehci-pci 0000:00:13.2: port 3 reset complete, port enabled [ 10.491298] ehci-pci 0000:00:13.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 10.544517] usb 2-3: reset high-speed USB device number 3 using ehci-pci [ 10.601137] ehci-pci 0000:00:13.2: port 3 reset complete, port enabled [ 10.601142] ehci-pci 0000:00:13.2: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 12.296274] bio: create slab <bio-1> at 1 [ 27.108347] device fsid 460c0ec0-e98a-48ea-a2f6-3a746c056d22 devid 1 transid 336209 /dev/dm-2 [ 27.318142] zcache: created ephemeral tmem pool, id=1, client=65535 [ 27.318147] EXT4-fs (sda1): re-mounted. Opts: (null) [ 27.524796] zcache: created persistent tmem pool, id=2, client=65535 [ 27.524799] Adding 2097148k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:2097148k FS [ 27.578407] device fsid 460c0ec0-e98a-48ea-a2f6-3a746c056d22 devid 1 transid 336209 /dev/mapper/crypt-scratch [ 27.579007] btrfs: disk space caching is enabled [ 27.825813] zcache: created ephemeral tmem pool, id=3, client=65535
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge Subsystem: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge Flags: bus master, 66MHz, medium devsel, latency 0 Memory at <ignored> (64-bit, non-prefetchable) [size=512M] Capabilities: [c4] HyperTransport: Slave or Primary Interface Capabilities: [40] HyperTransport: Retry Mode Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [9c] HyperTransport: #1a 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110] Virtual Channel Kernel driver in use: pcieport 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port F) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Port (Slot-), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110] Virtual Channel Kernel driver in use: pcieport 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22 I/O ports at b000 [size=8] I/O ports at a000 [size=4] I/O ports at 9000 [size=8] I/O ports at 8000 [size=4] I/O ports at 7000 [size=16] Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Capabilities: [70] SATA HBA v1.0 Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe8ff800 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe8f7000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at fe8ff400 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: 66MHz, medium devsel Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 I/O ports at 0170 [size=8] I/O ports at 0374 I/O ports at ff00 [size=16] Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit- Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, slow devsel, latency 64, IRQ 16 Memory at fe8f0000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller Subsystem: Advanced Micro Devices [AMD] nee ATI Device 4383 Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 4396 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe8f6000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control Flags: fast devsel 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0374 Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K] I/O ports at c000 [size=256] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: radeon 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series] Subsystem: ASUSTeK Computer Inc. Device aa68 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at fe9bc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) Subsystem: Micro-Star International Co., Ltd. Device 7599 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feac0000 (64-bit, non-prefetchable) [size=256K] I/O ports at d800 [size=128] Capabilities: [40] Power Management version 3 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [6c] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-bb-3f-b0-6c-62-6d-ff Kernel driver in use: atl1c 03:06.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 21 Memory at febe0000 (32-bit, non-prefetchable) [size=128K] Memory at febc0000 (32-bit, non-prefetchable) [size=128K] I/O ports at e800 [size=64] Expansion ROM at feba0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: e1000
Bus 001 Device 006: ID 04f9:002e Brother Industries, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04f9 Brother Industries, Ltd
idProduct 0x002e
bcdDevice 1.00
iManufacturer 1 Brother
iProduct 2 HL-4040CN
iSerial 3 000G7J181952
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 03f0:2504 Hewlett-Packard DeskJet F4200 series
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03f0 Hewlett-Packard
idProduct 0x2504 DeskJet F4200 series
bcdDevice 1.00
iManufacturer 1 HP
iProduct 2 Deskjet F4200 series
iSerial 3 CN8AE2R09V05BR
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 101
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 204
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 212
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 002 Device 007: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0151 Mass Storage Device (Multicard Reader)
bcdDevice 51.95
iManufacturer 1 Generic
iProduct 2 USB2.0-CRW
iSerial 3 20060413092100000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 CARD READER
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 5 Bulk-In, Bulk-Out, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 006 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc52b Unifying Receiver
bcdDevice 12.01
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 4 RQR12.01_B0019
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 148
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 98
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.8.2 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:14.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
# # Automatically generated file; DO NOT EDIT. # Linux/x86_64 3.8.2 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_KERNEL_XZ=y # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_NOCB_CPU is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y # CONFIG_MEMCG is not set # CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y # CONFIG_RT_GROUP_SCHED is not set # CONFIG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EXPERT is not set CONFIG_HAVE_UID16=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y # CONFIG_KPROBES is not set CONFIG_JUMP_LABEL=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_GENERIC_SIGALTSTACK=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_NO_BOOTMEM=y CONFIG_MEMTEST=y # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=4 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y # CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_AUTOSLEEP=y CONFIG_PM_WAKELOCKS=y CONFIG_PM_WAKELOCKS_LIMIT=100 CONFIG_PM_WAKELOCKS_GC=y CONFIG_PM_RUNTIME=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set # CONFIG_ACPI_PROC_EVENT is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_I2C=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_DEBUG=y # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set CONFIG_ACPI_HED=y # CONFIG_ACPI_CUSTOM_METHOD is not set CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y # CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set # CONFIG_SFI is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # x86 CPU frequency scaling drivers # # CONFIG_X86_PCC_CPUFREQ is not set CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_ACPI_CPUFREQ_CPB is not set CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set # CONFIG_PCIEASPM_DEFAULT is not set # CONFIG_PCIEASPM_POWERSAVE is not set CONFIG_PCIEASPM_PERFORMANCE=y CONFIG_PCIE_PME=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y CONFIG_PCI_PRI=y CONFIG_PCI_PASID=y CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_RAPIDIO is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_X86_X32=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_KEYS_COMPAT=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_XFRM=y CONFIG_XFRM_ALGO=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_INET_UDP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m # CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_GRE is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_NETPRIO_CGROUP is not set CONFIG_BQL=y CONFIG_BPF_JIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set CONFIG_CEPH_LIB=y # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin radeon/CEDAR_rlc.bin radeon/CEDAR_pfp.bin radeon/CEDAR_me.bin" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_DMA_SHARED_BUFFER=y # # Bus devices # # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_XIP=y CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_VIRTIO_BLK is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_INTEL_MID_PTI is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_BMP085_I2C is not set # CONFIG_PCH_PHUB is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_SCSI_BNX2X_FCOE is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_VMWARE_PVSCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_ISCI is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_VIRTIO is not set # CONFIG_SCSI_CHELSIO_FCOE is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_PMP is not set # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_HIGHBANK is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set CONFIG_PATA_ATIIXP=y # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_JMICRON=y # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SCH=y # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=y # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_FC is not set CONFIG_MII=y # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set CONFIG_TUN=y CONFIG_VETH=y CONFIG_VIRTIO_NET=y # CONFIG_ARCNET is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set # CONFIG_NET_VENDOR_AMD is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set CONFIG_ATL1C=y # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_CALXEDA_XGMAC is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EXAR is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set # CONFIG_NET_VENDOR_I825XX is not set # CONFIG_IP1000 is not set # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NVIDIA is not set # CONFIG_NET_VENDOR_OKI is not set # CONFIG_ETHOC is not set # CONFIG_NET_PACKET_ENGINE is not set # CONFIG_NET_VENDOR_QLOGIC is not set # CONFIG_NET_VENDOR_REALTEK is not set # CONFIG_NET_VENDOR_RDC is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_SFC is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set # CONFIG_PHYLIB is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_MPU3050 is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_CMA3000 is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set # CONFIG_HW_RANDOM_VIRTIO is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=m # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # CONFIG_HSI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_POWER_RESET is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_K8TEMP is not set CONFIG_SENSORS_K10TEMP=y CONFIG_SENSORS_FAM15H_POWER=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set CONFIG_SENSORS_F71882FG=y # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_CORETEMP=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_FAIR_SHARE is not set CONFIG_STEP_WISE=y # CONFIG_USER_SPACE is not set CONFIG_CPU_THERMAL=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_RTSX_PCI is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_LM3533 is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_SMSC is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_CS5535 is not set # CONFIG_LPC_SCH is not set # CONFIG_LPC_ICH is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_PALMAS is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_AS3711 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_VGA_SWITCHEROO is not set CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_TTM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y CONFIG_DRM_RADEON_KMS=y # CONFIG_DRM_NOUVEAU is not set # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_DRM_VMWGFX is not set # CONFIG_DRM_GMA500 is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set # CONFIG_DRM_CIRRUS_QEMU is not set # CONFIG_STUB_POULSBO is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_WMT_GE_ROPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_EXYNOS_VIDEO is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=y CONFIG_SND_SEQ_DUMMY=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_RTCTIMER=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_PREALLOC_SIZE=2048 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_INPUT_JACK=y # CONFIG_SND_HDA_PATCH_LOADER is not set CONFIG_SND_HDA_CODEC_REALTEK=y # CONFIG_SND_HDA_CODEC_ANALOG is not set # CONFIG_SND_HDA_CODEC_SIGMATEL is not set CONFIG_SND_HDA_CODEC_VIA=y # CONFIG_SND_HDA_CODEC_HDMI is not set # CONFIG_SND_HDA_CODEC_CIRRUS is not set # CONFIG_SND_HDA_CODEC_CONEXANT is not set # CONFIG_SND_HDA_CODEC_CA0110 is not set # CONFIG_SND_HDA_CODEC_CA0132 is not set # CONFIG_SND_HDA_CODEC_CMEDIA is not set # CONFIG_SND_HDA_CODEC_SI3054 is not set CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set # # HID support # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_PRODIKEYS is not set CONFIG_HID_CYPRESS=y # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set CONFIG_HID_EZKEY=y # CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set CONFIG_HID_KYE=m # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set CONFIG_HID_LOGITECH=y CONFIG_HID_LOGITECH_DJ=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_PCI=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PLATFORM is not set # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_CHIPIDEA is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=y # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_F81232 is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_METRO is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_ZTE is not set # CONFIG_USB_SERIAL_SSU100 is not set # CONFIG_USB_SERIAL_QT2 is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # # USB Physical Layer drivers # # CONFIG_USB_ISP1301 is not set # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=y # CONFIG_EDAC_MCE_INJ is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_AMD64=y # CONFIG_EDAC_AMD64_ERROR_INJECTION is not set # CONFIG_EDAC_E752X is not set # CONFIG_EDAC_I82975X is not set # CONFIG_EDAC_I3000 is not set # CONFIG_EDAC_I3200 is not set # CONFIG_EDAC_X38 is not set # CONFIG_EDAC_I5400 is not set # CONFIG_EDAC_I7CORE is not set # CONFIG_EDAC_I5000 is not set # CONFIG_EDAC_I5100 is not set # CONFIG_EDAC_I7300 is not set # CONFIG_EDAC_SBRIDGE is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_HYPERV is not set CONFIG_STAGING=y # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set # CONFIG_USBIP_CORE is not set # CONFIG_ECHO is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set # CONFIG_RTS5139 is not set # CONFIG_TRANZPORT is not set # CONFIG_IDE_PHISON is not set # CONFIG_LINE6_USB is not set # CONFIG_USB_SERIAL_QUATECH2 is not set # CONFIG_DX_SEP is not set # CONFIG_ZRAM is not set CONFIG_ZCACHE=y CONFIG_ZSMALLOC=y # CONFIG_FB_SM7XX is not set # CONFIG_CRYSTALHD is not set # CONFIG_FB_XGI is not set # CONFIG_ACPI_QUICKSTART is not set # CONFIG_USB_ENESTORAGE is not set # CONFIG_BCM_WIMAX is not set # CONFIG_FT1000 is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set # CONFIG_STAGING_MEDIA is not set # # Android # # CONFIG_ANDROID is not set # CONFIG_USB_WPAN_HCD is not set # CONFIG_WIMAX_GDM72XX is not set CONFIG_NET_VENDOR_SILICOM=y # CONFIG_SBYPASS is not set # CONFIG_BPCTL is not set # CONFIG_CED1401 is not set # CONFIG_DGRP is not set # CONFIG_SB105X is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACERHDF is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_FUJITSU_TABLET is not set # CONFIG_HP_ACCEL is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ACPI_WMI is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_TOSHIBA_BT_RFKILL is not set # CONFIG_ACPI_CMPC is not set # CONFIG_INTEL_IPS is not set # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set # CONFIG_SAMSUNG_LAPTOP is not set # CONFIG_SAMSUNG_Q10 is not set # CONFIG_APPLE_GMUX is not set # # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y CONFIG_AMD_IOMMU=y # CONFIG_AMD_IOMMU_STATS is not set # CONFIG_AMD_IOMMU_V2 is not set # CONFIG_INTEL_IOMMU is not set # CONFIG_IRQ_REMAP is not set # # Remoteproc drivers (EXPERIMENTAL) # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers (EXPERIMENTAL) # CONFIG_VIRT_DRIVERS=y # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # CONFIG_IPACK_BUS is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_DMI_SYSFS is not set # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_GOOGLE_FIRMWARE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set CONFIG_NILFS2_FS=m CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y CONFIG_FSCACHE_HISTOGRAM=y CONFIG_FSCACHE_DEBUG=y CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=y CONFIG_CACHEFILES_DEBUG=y CONFIG_CACHEFILES_HISTOGRAM=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_FTRACE is not set # CONFIG_PSTORE_RAM is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_SWAP is not set # CONFIG_NFS_V4_1 is not set CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_DEBUG=y CONFIG_CEPH_FS=y # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_LKDTM is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_EVENT_POWER_TRACING_DEPRECATED=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_UPROBE_EVENT is not set # CONFIG_PROBE_EVENTS is not set CONFIG_DYNAMIC_FTRACE=y # CONFIG_FUNCTION_PROFILER is not set CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_TEST_KSTRTOX is not set CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_OPTIMIZE_INLINING is not set # # Security options # CONFIG_KEYS=y # CONFIG_ENCRYPTED_KEYS is not set CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_PCBC is not set CONFIG_CRYPTO_XTS=y # # Hash modes # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_GHASH=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y # CONFIG_CRYPTO_HW is not set # CONFIG_ASYMMETRIC_KEY_TYPE is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=y # CONFIG_KVM_MMU_AUDIT is not set CONFIG_VHOST_NET=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_PERCPU_RWSEM=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y # CONFIG_CRC8 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set # CONFIG_DDR is not set
Attachment:
signature.asc
Description: Digital signature
