On Sun, 24 Feb 2013, Christian Lamparter wrote: > > The usbmon trace indicates that the data gets delivered to the device > > as it should, but the device doesn't accept it for several seconds. > > Looking at the logs, I find myself wondering how the "ffff88012fe19500" > urb-complete ninja'd right in between the ffff880146c8af00 xmit and > complete. > > ffff88012fe19500 1519981417 S Bo:3:003:1 -115 126 = 7e000000 190f0100 23232303 42b53600 82b11a00 01c02e00 6a00e846 c2ad3e00 > ... > ffff880146c8af00 1522200650 S Bo:3:003:1 -115 62 = 3e000000 01000500 03000000 00000000 00000000 00000000 22000$ > ffff88012fe19500 1522200720 C Bo:3:003:1 0 126 > > ffff880146c8af00 1522200756 C Bo:3:003:1 0 62 > In fact this is both normal and required. Packets to any particular endpoint must always be delivered in order. Therefore the URBs have to complete in the same order as they were submitted. > From the device side, taking the data shouldn't be a problem. The > rx is handled by hardware dma. The data from the host is put into > packages of 320 bytes (The carl9170 firmware has about 180 to 190 > of these 320 byte packages reserved for this purpose. So at no > point there should be any long delay because of lack of resources > or whatever). Also, it doesn't look the was any unusually high > load on the link. And the hardware can handle sustained wifi traffic > up to 160mbit/s (udp peaks at about 180mbit/s) without choking. > > Alan, > > Do you know if there a way to monitor whenever individual attempts > from the ehci/xhci hcd? Only with a USB bus analyzer. Unfortuantely these things tend to be expensive, especially if you want one that works at SuperSpeed. > Or can you think of any other "interesting" > bits that could help to explain why the "Arrandale box [...] worked > perfectly" whereas (all his) Ivy Bridge ones have problems. > (Of course, I assume that it is always the same device, the > same firmware and the same kernel drivers in all tests, right)? No, not really. Unless one is using USB-2 and the other USB-3 -- the device might have a bug in its USB-3 firmware. What happens if xhci-hcd is unloaded before the test? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
