Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 15, 2013 at 11:54:10AM +0100, Sascha Hauer wrote:
> On Thu, Feb 14, 2013 at 09:36:26PM +0200, Felipe Balbi wrote:
> > Hi,
> > 
> > On Thu, Feb 14, 2013 at 07:30:26PM +0100, Sascha Hauer wrote:
> > > > > > yeah, this is why I said we should ignore dr_mode (or bail out) when
> > > > > > !OTG.
> > > > > 
> > > > > Ok, that's what the patch effectively does. We have this in chipidea/core.c:
> > > > > 
> > > > > | 	dr_mode = ci->platdata->dr_mode;
> > > > > | 	if (dr_mode == USB_DR_MODE_UNKNOWN)
> > > > > | 		dr_mode = USB_DR_MODE_OTG;
> > > > > 
> > > > > default to otg if nothing specified.
> > > > 
> > > > you missed my point. I wanted something like:
> > > > 
> > > > dr_mode = ci->platdata->dr_mode;
> > > > if ((dr_mode == USB_DR_MODE_UNKNOWN) || !IS_ENABLED(CONFIG_USB_CHIPIDEA_OTG)
> > > > 	dr_mode = USB_DR_MODE_OTG;
> > > 
> > > So everytime the chipidea driver cannot do OTG the driver falls back to
> > > exactly this mode?
> > 
> > hehe, that was me being stupid I meant something like:
> > 
> > if (!IS_ENABLED(HOST) && dr_mode == HOST)
> > 
> > or
> > 
> > if (!IS_ENABLED(GADGET) && dr_mode == GADGET)
> > 
> > in those cases, it's best to either force OTG (then driver will work
> > with whatever it has) or bail out.
> > 
> > Thinking a bit harder, it's best to bail as you can't be sure udc.c or
> > host.c have been compiled in.
> 
> Look again, that's what the current code does. Maybe it's not coded as
> explicit as you describe above.
> 
> | 	/* initialize role(s) before the interrupt is requested */
> | 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
> | 		ret = ci_hdrc_host_init(ci);
> | 		if (ret)
> | 			dev_info(dev, "doesn't support host\n");
> | 	}
> 
> if IS_ENABLED(HOST), then ci_hdrc_host_init() will set
> ci->roles[CI_ROLE_HOST] in case it manages to initialize the host driver.
> 
> if !IS_ENABLED(HOST), then ci_hdrc_host_init() will be a static inline
> noop function, so ci->roles[CI_ROLE_HOST] ends up being NULL.
> 
> | 
> | 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
> | 		ret = ci_hdrc_gadget_init(ci);
> | 		if (ret)
> | 			dev_info(dev, "doesn't support gadget\n");
> | 	}
> 
> Same applies for gadget.
> 
> | 
> | 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
> | 		dev_err(dev, "no supported roles\n");
> | 		ret = -ENODEV;
> | 		goto rm_wq;
> | 	}
> 
> At this point (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET])
> means that the intersection of what is requested and what we are able to
> do is empty. The reasons could be That the requested mode is not compiled
> into the kernel, or the requested role failed to initialize.
I have tested host-only capable port (host 1) and dr_mode = "host" DT setting
(OTG port) as well as only compile chipidea gadget, the "no support roles"
will be reported, and fails probe, see below. (The platform layer probe's
error needs to my another patch in my otg patchset)

ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: c08a6100 op: c08a6140
ci_hdrc ci_hdrc.0: doesn't support host
ci_hdrc ci_hdrc.0: no supported roles
imx_usb 2184000.usb: Can't register ci_hdrc platform device, err=-19
imx_usb 2184200.usb: pinctrl get/select failed, err=-19
ci_hdrc ci_hdrc.1: ChipIdea HDRC found, lpm: 0; cap: c08ae300 op: c08ae340
ci_hdrc ci_hdrc.1: doesn't support host
ci_hdrc ci_hdrc.1: doesn't support gadget
ci_hdrc ci_hdrc.1: no supported roles
imx_usb 2184200.usb: Can't register ci_hdrc platform device, err=-19

> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 

Best Regards,
Peter Chen

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux