Re: [usb-storage + sd] Driver fails to read e-reader av (autovision) 606

[Ronald <ronald645@xxxxxxxxx>]

> This e-mail is a follow-up as requested in this bug[1]. I will repost
> everything so far in this e-mail. Please CC me as I'm not subscribed
> to your list.
>
> We have acquired an e-reader which says: 'AV Autovision AV606'. I have
> confirmed with the distributer that it uses the usb-storage driver
> (not MTP). Did try that though, didn't work.
>
> Attached:
> [2] lsusb -v
> [3] kernel spew of v3.4 kernel the spawned sg[0-3] nodes all fail to mount
>
> Any direction, suggestion on how to proceed? I cannot provide more
> info as I don't know what to provide anymore. Please tell. Would like
> to use this e-reader with Linux. Otherwise an alternative OS is being
> preferred by it's daily users... :(
>
> I Would like to reassure you that I tested this with 3.8.0-rc7+ + the
> latest nouveau tree. These patches are not intrusive. I have v3.4
> kernel output here since I tried a liveCD (Gentoo based linux
> rescuecd). It's kernel seems to have more debug options enabled.
>
> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=53891
> [2]: Attachment 'E-reader lsusb output.txt'
> [3]: Attachment 'E-reader dmesg output.txt'

I attached a new document[1] with verbose USB logging while connecting
the E-reader. This is with today's kernel git + nouveau git of today
(v3.8-rc7+). It's pretty big btw...

I also enabled verbose SCSI logging, but didn't see some of that come
back in the logs.

[  162.463083] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0020
[  162.463096] ehci-pci 0000:00:02.1: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
[  162.463103] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[  162.620011] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
[  162.680217] ehci-pci 0000:00:02.1: port 5 reset complete, port enabled
[  162.680225] ehci-pci 0000:00:02.1: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  162.740014] usb 1-5: new high-speed USB device number 4 using ehci-pci
[  162.800257] ehci-pci 0000:00:02.1: port 5 reset complete, port enabled
[  162.800264] ehci-pci 0000:00:02.1: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  162.890507] usb 1-5: default language 0x0409
[  162.890878] usb 1-5: udev 4, busnum 1, minor = 3
[  162.890881] usb 1-5: New USB device found, idVendor=05e3, idProduct=0726
[  162.890884] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  162.890887] usb 1-5: Product: Ebook Device
[  162.890889] usb 1-5: Manufacturer: Sibrary
[  162.890891] usb 1-5: SerialNumber: unknown
[  162.890956] usb 1-5: usb_probe_device
[  162.890959] usb 1-5: configuration #1 chosen from 1 choice
[  162.893138] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
[  162.893170] usb-storage 1-5:1.0: usb_probe_interface
[  162.893175] usb-storage 1-5:1.0: usb_probe_interface - got id
[  162.893178] usb-storage: USB Mass Storage device detected
[  162.893234] usb-storage: -- associate_dev
[  162.893236] usb-storage: Vendor: 0x05e3, Product: 0x0726, Revision: 0x0222
[  162.893238] usb-storage: Interface Subclass: 0x06, Protocol: 0x50
[  162.893241] usb-storage: Transport: Bulk
[  162.893242] usb-storage: Protocol: Transparent SCSI
[  162.893254] scsi5 : usb-storage 1-5:1.0
[  162.893292] usb-storage 1-5:1.0: waiting for device to settle before scanning
[  162.899942] usb-storage: *** thread sleeping.
[  163.890010] usb-storage 1-5:1.0: starting scan
[  163.890017] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
[  163.890195] usb-storage: GetMaxLUN command result is 1, data is 1
[  163.890235] usb-storage: queuecommand_lck called
[  163.890240] usb-storage: *** thread awakened.
[  163.890242] usb-storage: Command INQUIRY (6 bytes)
[  163.890243] usb-storage:  12 00 00 00 24 00
[  163.890249] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
[  163.890251] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.891316] usb-storage: Status code 0; transferred 31/31
[  163.891318] usb-storage: -- transfer complete
[  163.891319] usb-storage: Bulk command transfer result=0
[  163.891321] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
[  163.892316] usb-storage: Status code 0; transferred 36/36
[  163.892317] usb-storage: -- transfer complete
[  163.892318] usb-storage: Bulk data transfer result 0x0
[  163.892319] usb-storage: Attempting to get CSW...
[  163.892321] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.892442] usb-storage: Status code 0; transferred 13/13
[  163.892443] usb-storage: -- transfer complete
[  163.892445] usb-storage: Bulk status result = 0
[  163.892447] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
[  163.892449] usb-storage: scsi cmd done, result=0x0
[  163.892451] usb-storage: *** thread sleeping.
[  163.892473] scsi 5:0:0:0: Direct-Access     rockchip rk28 sdk demo    0000 PQ: 0 ANSI: 2
[  163.892584] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  163.892618] usb-storage: queuecommand_lck called
[  163.893711] usb-storage: *** thread awakened.
[  163.893719] usb-storage: Bad target number (1:0)
[  163.893720] usb-storage: scsi cmd done, result=0x40000
[  163.893723] usb-storage: *** thread sleeping.
[  163.893754] usb-storage: queuecommand_lck called
[  163.893760] usb-storage: *** thread awakened.
[  163.893762] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  163.893763] usb-storage:  00 00 00 00 00 00
[  163.893769] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
[  163.893771] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.898947] usb-storage: Status code 0; transferred 31/31
[  163.898951] usb-storage: -- transfer complete
[  163.898953] usb-storage: Bulk command transfer result=0
[  163.898954] usb-storage: Attempting to get CSW...
[  163.898956] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.899815] usb-storage: Status code 0; transferred 13/13
[  163.899816] usb-storage: -- transfer complete
[  163.899818] usb-storage: Bulk status result = 0
[  163.899820] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1
[  163.899822] usb-storage: -- transport indicates command failure
[  163.899823] usb-storage: Issuing auto-REQUEST_SENSE
[  163.899826] usb-storage: Bulk Command S 0x43425355 T 0x3 L 18 F 128 Trg 0 LUN 0 CL 6
[  163.899828] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.899939] usb-storage: Status code 0; transferred 31/31
[  163.899941] usb-storage: -- transfer complete
[  163.899942] usb-storage: Bulk command transfer result=0
[  163.899944] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  163.909068] usb-storage: Status code 0; transferred 18/18
[  163.909070] usb-storage: -- transfer complete
[  163.909072] usb-storage: Bulk data transfer result 0x0
[  163.909073] usb-storage: Attempting to get CSW...
[  163.909074] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.909189] usb-storage: Status code 0; transferred 13/13
[  163.909190] usb-storage: -- transfer complete
[  163.909191] usb-storage: Bulk status result = 0
[  163.909193] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
[  163.909196] usb-storage: -- Result from auto-sense is 0
[  163.909197] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
[  163.909201] usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
[  163.909204] usb-storage: scsi cmd done, result=0x2
[  163.909207] usb-storage: *** thread sleeping.
[  163.909218] usb-storage: queuecommand_lck called
[  163.909229] usb-storage: *** thread awakened.
[  163.909231] usb-storage: Bad target number (2:0)
[  163.909233] usb-storage: scsi cmd done, result=0x40000
[  163.909234] usb-storage: *** thread sleeping.
[  163.909240] usb-storage: queuecommand_lck called
[  163.909280] usb-storage: *** thread awakened.
[  163.909282] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  163.909284] usb-storage:  00 00 00 00 00 00
[  163.909288] usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
[  163.909290] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.918940] usb-storage: Status code 0; transferred 31/31
[  163.918942] usb-storage: -- transfer complete
[  163.918943] usb-storage: Bulk command transfer result=0
[  163.918944] usb-storage: Attempting to get CSW...
[  163.918946] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.924440] usb-storage: Status code 0; transferred 13/13
[  163.924442] usb-storage: -- transfer complete
[  163.924443] usb-storage: Bulk status result = 0
[  163.924445] usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x1
[  163.924447] usb-storage: -- transport indicates command failure
[  163.924448] usb-storage: Issuing auto-REQUEST_SENSE
[  163.924451] usb-storage: Bulk Command S 0x43425355 T 0x5 L 18 F 128 Trg 0 LUN 0 CL 6
[  163.924452] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.924564] usb-storage: Status code 0; transferred 31/31
[  163.924565] usb-storage: -- transfer complete
[  163.924566] usb-storage: Bulk command transfer result=0
[  163.924568] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  163.939064] usb-storage: Status code 0; transferred 18/18
[  163.939066] usb-storage: -- transfer complete
[  163.939067] usb-storage: Bulk data transfer result 0x0
[  163.939068] usb-storage: Attempting to get CSW...
[  163.939070] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.939188] usb-storage: Status code 0; transferred 13/13
[  163.939189] usb-storage: -- transfer complete
[  163.939190] usb-storage: Bulk status result = 0
[  163.939192] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
[  163.939194] usb-storage: -- Result from auto-sense is 0
[  163.939196] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  163.939199] usb-storage: Not Ready: Medium not present
[  163.939200] usb-storage: scsi cmd done, result=0x2
[  163.939202] usb-storage: *** thread sleeping.
[  163.939208] usb-storage: queuecommand_lck called
[  163.940044] usb-storage: *** thread awakened.
[  163.940048] usb-storage: Bad target number (3:0)
[  163.940050] usb-storage: scsi cmd done, result=0x40000
[  163.940052] usb-storage: *** thread sleeping.
[  163.940065] usb-storage: queuecommand_lck called
[  163.940111] usb-storage: *** thread awakened.
[  163.940113] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  163.940114] usb-storage:  00 00 00 00 00 00
[  163.940120] usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6
[  163.940122] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.959071] usb-storage: Status code 0; transferred 31/31
[  163.959075] usb-storage: -- transfer complete
[  163.959077] usb-storage: Bulk command transfer result=0
[  163.959078] usb-storage: Attempting to get CSW...
[  163.959081] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.963063] usb-storage: Status code 0; transferred 13/13
[  163.963065] usb-storage: -- transfer complete
[  163.963066] usb-storage: Bulk status result = 0
[  163.963068] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x1
[  163.963070] usb-storage: -- transport indicates command failure
[  163.963072] usb-storage: Issuing auto-REQUEST_SENSE
[  163.963075] usb-storage: Bulk Command S 0x43425355 T 0x7 L 18 F 128 Trg 0 LUN 0 CL 6
[  163.963077] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.963185] usb-storage: Status code 0; transferred 31/31
[  163.963187] usb-storage: -- transfer complete
[  163.963188] usb-storage: Bulk command transfer result=0
[  163.963190] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  163.975062] usb-storage: Status code 0; transferred 18/18
[  163.975064] usb-storage: -- transfer complete
[  163.975065] usb-storage: Bulk data transfer result 0x0
[  163.975066] usb-storage: Attempting to get CSW...
[  163.975068] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.975185] usb-storage: Status code 0; transferred 13/13
[  163.975186] usb-storage: -- transfer complete
[  163.975187] usb-storage: Bulk status result = 0
[  163.975189] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
[  163.975191] usb-storage: -- Result from auto-sense is 0
[  163.975193] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  163.975197] usb-storage: Not Ready: Medium not present
[  163.975200] usb-storage: scsi cmd done, result=0x2
[  163.975202] usb-storage: *** thread sleeping.
[  163.975213] usb-storage: queuecommand_lck called
[  163.975324] usb-storage: *** thread awakened.
[  163.975326] usb-storage: Bad target number (4:0)
[  163.975327] usb-storage: scsi cmd done, result=0x40000
[  163.975329] usb-storage: *** thread sleeping.
[  163.975337] usb-storage: queuecommand_lck called
[  163.975377] usb-storage: *** thread awakened.
[  163.975379] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  163.975381] usb-storage:  00 00 00 00 00 00
[  163.975386] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6
[  163.975387] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.976310] usb-storage: Status code 0; transferred 31/31
[  163.976312] usb-storage: -- transfer complete
[  163.976313] usb-storage: Bulk command transfer result=0
[  163.976314] usb-storage: Attempting to get CSW...
[  163.976316] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  163.989185] usb-storage: Status code 0; transferred 13/13
[  163.989187] usb-storage: -- transfer complete
[  163.989188] usb-storage: Bulk status result = 0
[  163.989190] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x1
[  163.989192] usb-storage: -- transport indicates command failure
[  163.989193] usb-storage: Issuing auto-REQUEST_SENSE
[  163.989196] usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6
[  163.989197] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  163.990310] usb-storage: Status code 0; transferred 31/31
[  163.990311] usb-storage: -- transfer complete
[  163.990313] usb-storage: Bulk command transfer result=0
[  163.990315] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.001936] usb-storage: Status code 0; transferred 18/18
[  164.001938] usb-storage: -- transfer complete
[  164.001939] usb-storage: Bulk data transfer result 0x0
[  164.001940] usb-storage: Attempting to get CSW...
[  164.001942] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.002058] usb-storage: Status code 0; transferred 13/13
[  164.002059] usb-storage: -- transfer complete
[  164.002060] usb-storage: Bulk status result = 0
[  164.002062] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
[  164.002064] usb-storage: -- Result from auto-sense is 0
[  164.002066] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.002069] usb-storage: Not Ready: Medium not present
[  164.002072] usb-storage: scsi cmd done, result=0x2
[  164.002074] usb-storage: *** thread sleeping.
[  164.002082] usb-storage: queuecommand_lck called
[  164.002098] usb-storage: *** thread awakened.
[  164.002100] usb-storage: Bad target number (5:0)
[  164.002101] usb-storage: scsi cmd done, result=0x40000
[  164.002103] usb-storage: *** thread sleeping.
[  164.002110] usb-storage: queuecommand_lck called
[  164.002352] usb-storage: *** thread awakened.
[  164.002355] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.002356] usb-storage:  00 00 00 00 00 00
[  164.002361] usb-storage: Bulk Command S 0x43425355 T 0xa L 0 F 0 Trg 0 LUN 0 CL 6
[  164.002363] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.002451] usb-storage: Status code 0; transferred 31/31
[  164.002452] usb-storage: -- transfer complete
[  164.002454] usb-storage: Bulk command transfer result=0
[  164.002455] usb-storage: Attempting to get CSW...
[  164.002456] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.003564] usb-storage: Status code 0; transferred 13/13
[  164.003582] usb-storage: -- transfer complete
[  164.003583] usb-storage: Bulk status result = 0
[  164.003585] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x1
[  164.003587] usb-storage: -- transport indicates command failure
[  164.003588] usb-storage: Issuing auto-REQUEST_SENSE
[  164.003591] usb-storage: Bulk Command S 0x43425355 T 0xb L 18 F 128 Trg 0 LUN 0 CL 6
[  164.003593] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.003683] usb-storage: Status code 0; transferred 31/31
[  164.003684] usb-storage: -- transfer complete
[  164.003685] usb-storage: Bulk command transfer result=0
[  164.003687] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.034186] usb-storage: Status code 0; transferred 18/18
[  164.034189] usb-storage: -- transfer complete
[  164.034190] usb-storage: Bulk data transfer result 0x0
[  164.034191] usb-storage: Attempting to get CSW...
[  164.034193] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.034305] usb-storage: Status code 0; transferred 13/13
[  164.034306] usb-storage: -- transfer complete
[  164.034308] usb-storage: Bulk status result = 0
[  164.034309] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
[  164.034312] usb-storage: -- Result from auto-sense is 0
[  164.034314] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.034318] usb-storage: Not Ready: Medium not present
[  164.034321] usb-storage: scsi cmd done, result=0x2
[  164.034323] usb-storage: *** thread sleeping.
[  164.034333] usb-storage: queuecommand_lck called
[  164.035702] usb-storage: *** thread awakened.
[  164.035709] usb-storage: Bad target number (6:0)
[  164.035711] usb-storage: scsi cmd done, result=0x40000
[  164.035713] usb-storage: *** thread sleeping.
[  164.035730] usb-storage: queuecommand_lck called
[  164.035782] usb-storage: *** thread awakened.
[  164.035784] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.035785] usb-storage:  00 00 00 00 00 00
[  164.035791] usb-storage: Bulk Command S 0x43425355 T 0xc L 0 F 0 Trg 0 LUN 0 CL 6
[  164.035793] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.036315] usb-storage: Status code 0; transferred 31/31
[  164.036318] usb-storage: -- transfer complete
[  164.036319] usb-storage: Bulk command transfer result=0
[  164.036321] usb-storage: Attempting to get CSW...
[  164.036323] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.036432] usb-storage: Status code 0; transferred 13/13
[  164.036433] usb-storage: -- transfer complete
[  164.036434] usb-storage: Bulk status result = 0
[  164.036436] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x1
[  164.036438] usb-storage: -- transport indicates command failure
[  164.036440] usb-storage: Issuing auto-REQUEST_SENSE
[  164.036443] usb-storage: Bulk Command S 0x43425355 T 0xd L 18 F 128 Trg 0 LUN 0 CL 6
[  164.036445] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.036556] usb-storage: Status code 0; transferred 31/31
[  164.036558] usb-storage: -- transfer complete
[  164.036559] usb-storage: Bulk command transfer result=0
[  164.036561] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.067438] usb-storage: Status code 0; transferred 18/18
[  164.067442] usb-storage: -- transfer complete
[  164.067444] usb-storage: Bulk data transfer result 0x0
[  164.067445] usb-storage: Attempting to get CSW...
[  164.067447] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.067553] usb-storage: Status code 0; transferred 13/13
[  164.067555] usb-storage: -- transfer complete
[  164.067556] usb-storage: Bulk status result = 0
[  164.067558] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
[  164.067561] usb-storage: -- Result from auto-sense is 0
[  164.067563] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.067567] usb-storage: Not Ready: Medium not present
[  164.067570] usb-storage: scsi cmd done, result=0x2
[  164.067573] usb-storage: *** thread sleeping.
[  164.067584] usb-storage: queuecommand_lck called
[  164.067596] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[  164.067599] usb-storage: *** thread awakened.
[  164.067601] usb-storage: Bad target number (7:0)
[  164.067602] usb-storage: scsi cmd done, result=0x40000
[  164.067604] usb-storage: *** thread sleeping.
[  164.067611] usb-storage: queuecommand_lck called
[  164.067628] usb-storage 1-5:1.0: scan complete
[  164.067631] usb-storage: *** thread awakened.
[  164.067632] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.067634] usb-storage:  00 00 00 00 00 00
[  164.067639] usb-storage: Bulk Command S 0x43425355 T 0xe L 0 F 0 Trg 0 LUN 0 CL 6
[  164.067640] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.068303] usb-storage: Status code 0; transferred 31/31
[  164.068304] usb-storage: -- transfer complete
[  164.068306] usb-storage: Bulk command transfer result=0
[  164.068307] usb-storage: Attempting to get CSW...
[  164.068308] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.068428] usb-storage: Status code 0; transferred 13/13
[  164.068429] usb-storage: -- transfer complete
[  164.068430] usb-storage: Bulk status result = 0
[  164.068432] usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x1
[  164.068433] usb-storage: -- transport indicates command failure
[  164.068435] usb-storage: Issuing auto-REQUEST_SENSE
[  164.068438] usb-storage: Bulk Command S 0x43425355 T 0xf L 18 F 128 Trg 0 LUN 0 CL 6
[  164.068440] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.068552] usb-storage: Status code 0; transferred 31/31
[  164.068554] usb-storage: -- transfer complete
[  164.068555] usb-storage: Bulk command transfer result=0
[  164.068557] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.099055] usb-storage: Status code 0; transferred 18/18
[  164.099058] usb-storage: -- transfer complete
[  164.099059] usb-storage: Bulk data transfer result 0x0
[  164.099060] usb-storage: Attempting to get CSW...
[  164.099062] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.099175] usb-storage: Status code 0; transferred 13/13
[  164.099176] usb-storage: -- transfer complete
[  164.099178] usb-storage: Bulk status result = 0
[  164.099180] usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
[  164.099182] usb-storage: -- Result from auto-sense is 0
[  164.099184] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.099187] usb-storage: Not Ready: Medium not present
[  164.099190] usb-storage: scsi cmd done, result=0x2
[  164.099192] usb-storage: *** thread sleeping.
[  164.100714] usb-storage: queuecommand_lck called
[  164.100733] usb-storage: *** thread awakened.
[  164.100736] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.100737] usb-storage:  00 00 00 00 00 00
[  164.100743] usb-storage: Bulk Command S 0x43425355 T 0x10 L 0 F 0 Trg 0 LUN 0 CL 6
[  164.100745] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.101313] usb-storage: Status code 0; transferred 31/31
[  164.101316] usb-storage: -- transfer complete
[  164.101318] usb-storage: Bulk command transfer result=0
[  164.101319] usb-storage: Attempting to get CSW...
[  164.101321] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.125434] usb-storage: Status code 0; transferred 13/13
[  164.125438] usb-storage: -- transfer complete
[  164.125440] usb-storage: Bulk status result = 0
[  164.125442] usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x1
[  164.125444] usb-storage: -- transport indicates command failure
[  164.125445] usb-storage: Issuing auto-REQUEST_SENSE
[  164.125449] usb-storage: Bulk Command S 0x43425355 T 0x11 L 18 F 128 Trg 0 LUN 0 CL 6
[  164.125451] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.126299] usb-storage: Status code 0; transferred 31/31
[  164.126300] usb-storage: -- transfer complete
[  164.126301] usb-storage: Bulk command transfer result=0
[  164.126303] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.126425] usb-storage: Status code 0; transferred 18/18
[  164.126426] usb-storage: -- transfer complete
[  164.126427] usb-storage: Bulk data transfer result 0x0
[  164.126428] usb-storage: Attempting to get CSW...
[  164.126430] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.126549] usb-storage: Status code 0; transferred 13/13
[  164.126550] usb-storage: -- transfer complete
[  164.126551] usb-storage: Bulk status result = 0
[  164.126553] usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
[  164.126555] usb-storage: -- Result from auto-sense is 0
[  164.126557] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.126561] usb-storage: Not Ready: Medium not present
[  164.126564] usb-storage: scsi cmd done, result=0x2
[  164.126567] usb-storage: *** thread sleeping.
[  164.135885] usb-storage: queuecommand_lck called
[  164.135894] usb-storage: *** thread awakened.
[  164.135897] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.135899] usb-storage:  00 00 00 00 00 00
[  164.135905] usb-storage: Bulk Command S 0x43425355 T 0x12 L 0 F 0 Trg 0 LUN 0 CL 6
[  164.135907] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.136053] usb-storage: Status code 0; transferred 31/31
[  164.136055] usb-storage: -- transfer complete
[  164.136056] usb-storage: Bulk command transfer result=0
[  164.136057] usb-storage: Attempting to get CSW...
[  164.136059] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.136173] usb-storage: Status code 0; transferred 13/13
[  164.136174] usb-storage: -- transfer complete
[  164.136176] usb-storage: Bulk status result = 0
[  164.136178] usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x1
[  164.136179] usb-storage: -- transport indicates command failure
[  164.136181] usb-storage: Issuing auto-REQUEST_SENSE
[  164.136184] usb-storage: Bulk Command S 0x43425355 T 0x13 L 18 F 128 Trg 0 LUN 0 CL 6
[  164.136186] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.136295] usb-storage: Status code 0; transferred 31/31
[  164.136296] usb-storage: -- transfer complete
[  164.136297] usb-storage: Bulk command transfer result=0
[  164.136299] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.136424] usb-storage: Status code 0; transferred 18/18
[  164.136425] usb-storage: -- transfer complete
[  164.136426] usb-storage: Bulk data transfer result 0x0
[  164.136428] usb-storage: Attempting to get CSW...
[  164.136429] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.136545] usb-storage: Status code 0; transferred 13/13
[  164.136546] usb-storage: -- transfer complete
[  164.136548] usb-storage: Bulk status result = 0
[  164.136550] usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
[  164.136552] usb-storage: -- Result from auto-sense is 0
[  164.136553] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.136557] usb-storage: Not Ready: Medium not present
[  164.136560] usb-storage: scsi cmd done, result=0x2
[  164.136563] usb-storage: *** thread sleeping.
[  164.142354] usb-storage: queuecommand_lck called
[  164.142369] usb-storage: *** thread awakened.
[  164.142372] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.142374] usb-storage:  00 00 00 00 00 00
[  164.142380] usb-storage: Bulk Command S 0x43425355 T 0x14 L 0 F 0 Trg 0 LUN 0 CL 6
[  164.142382] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.142429] usb-storage: Status code 0; transferred 31/31
[  164.142431] usb-storage: -- transfer complete
[  164.142432] usb-storage: Bulk command transfer result=0
[  164.142433] usb-storage: Attempting to get CSW...
[  164.142435] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.142546] usb-storage: Status code 0; transferred 13/13
[  164.142547] usb-storage: -- transfer complete
[  164.142549] usb-storage: Bulk status result = 0
[  164.142551] usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x1
[  164.142552] usb-storage: -- transport indicates command failure
[  164.142554] usb-storage: Issuing auto-REQUEST_SENSE
[  164.142557] usb-storage: Bulk Command S 0x43425355 T 0x15 L 18 F 128 Trg 0 LUN 0 CL 6
[  164.142559] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.142672] usb-storage: Status code 0; transferred 31/31
[  164.142674] usb-storage: -- transfer complete
[  164.142675] usb-storage: Bulk command transfer result=0
[  164.142677] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.142797] usb-storage: Status code 0; transferred 18/18
[  164.142798] usb-storage: -- transfer complete
[  164.142799] usb-storage: Bulk data transfer result 0x0
[  164.142801] usb-storage: Attempting to get CSW...
[  164.142802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.142921] usb-storage: Status code 0; transferred 13/13
[  164.142922] usb-storage: -- transfer complete
[  164.142923] usb-storage: Bulk status result = 0
[  164.142925] usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
[  164.142927] usb-storage: -- Result from auto-sense is 0
[  164.142929] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.142932] usb-storage: Not Ready: Medium not present
[  164.142935] usb-storage: scsi cmd done, result=0x2
[  164.142937] usb-storage: *** thread sleeping.
[  164.150234] usb-storage: queuecommand_lck called
[  164.150400] usb-storage: *** thread awakened.
[  164.150403] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.150404] usb-storage:  00 00 00 00 00 00
[  164.150410] usb-storage: Bulk Command S 0x43425355 T 0x16 L 0 F 0 Trg 0 LUN 0 CL 6
[  164.150412] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.150555] usb-storage: Status code 0; transferred 31/31
[  164.150556] usb-storage: -- transfer complete
[  164.150558] usb-storage: Bulk command transfer result=0
[  164.150559] usb-storage: Attempting to get CSW...
[  164.150561] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.150677] usb-storage: Status code 0; transferred 13/13
[  164.150679] usb-storage: -- transfer complete
[  164.150680] usb-storage: Bulk status result = 0
[  164.150682] usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x1
[  164.150684] usb-storage: -- transport indicates command failure
[  164.150685] usb-storage: Issuing auto-REQUEST_SENSE
[  164.150688] usb-storage: Bulk Command S 0x43425355 T 0x17 L 18 F 128 Trg 0 LUN 0 CL 6
[  164.150690] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.150799] usb-storage: Status code 0; transferred 31/31
[  164.150800] usb-storage: -- transfer complete
[  164.150801] usb-storage: Bulk command transfer result=0
[  164.150803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.150923] usb-storage: Status code 0; transferred 18/18
[  164.150925] usb-storage: -- transfer complete
[  164.150926] usb-storage: Bulk data transfer result 0x0
[  164.150927] usb-storage: Attempting to get CSW...
[  164.150929] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.151048] usb-storage: Status code 0; transferred 13/13
[  164.151050] usb-storage: -- transfer complete
[  164.151051] usb-storage: Bulk status result = 0
[  164.151053] usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0
[  164.151055] usb-storage: -- Result from auto-sense is 0
[  164.151057] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.151060] usb-storage: Not Ready: Medium not present
[  164.151063] usb-storage: scsi cmd done, result=0x2
[  164.151065] usb-storage: *** thread sleeping.
[  164.163994] usb-storage: queuecommand_lck called
[  164.164010] usb-storage: *** thread awakened.
[  164.164013] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.164014] usb-storage:  00 00 00 00 00 00
[  164.164021] usb-storage: Bulk Command S 0x43425355 T 0x18 L 0 F 0 Trg 0 LUN 0 CL 6
[  164.164023] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.164177] usb-storage: Status code 0; transferred 31/31
[  164.164179] usb-storage: -- transfer complete
[  164.164180] usb-storage: Bulk command transfer result=0
[  164.164181] usb-storage: Attempting to get CSW...
[  164.164183] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.165295] usb-storage: Status code 0; transferred 13/13
[  164.165297] usb-storage: -- transfer complete
[  164.165298] usb-storage: Bulk status result = 0
[  164.165300] usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x1
[  164.165301] usb-storage: -- transport indicates command failure
[  164.165303] usb-storage: Issuing auto-REQUEST_SENSE
[  164.165306] usb-storage: Bulk Command S 0x43425355 T 0x19 L 18 F 128 Trg 0 LUN 0 CL 6
[  164.165308] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.165419] usb-storage: Status code 0; transferred 31/31
[  164.165421] usb-storage: -- transfer complete
[  164.165422] usb-storage: Bulk command transfer result=0
[  164.165424] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.165544] usb-storage: Status code 0; transferred 18/18
[  164.165545] usb-storage: -- transfer complete
[  164.165546] usb-storage: Bulk data transfer result 0x0
[  164.165547] usb-storage: Attempting to get CSW...
[  164.165549] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.165668] usb-storage: Status code 0; transferred 13/13
[  164.165669] usb-storage: -- transfer complete
[  164.165671] usb-storage: Bulk status result = 0
[  164.165673] usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
[  164.165675] usb-storage: -- Result from auto-sense is 0
[  164.165676] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.165680] usb-storage: Not Ready: Medium not present
[  164.165683] usb-storage: scsi cmd done, result=0x2
[  164.165685] usb-storage: *** thread sleeping.
[  164.176216] usb-storage: queuecommand_lck called
[  164.176226] usb-storage: *** thread awakened.
[  164.176229] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.176230] usb-storage:  00 00 00 00 00 00
[  164.176236] usb-storage: Bulk Command S 0x43425355 T 0x1a L 0 F 0 Trg 0 LUN 0 CL 6
[  164.176238] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.177298] usb-storage: Status code 0; transferred 31/31
[  164.177300] usb-storage: -- transfer complete
[  164.177301] usb-storage: Bulk command transfer result=0
[  164.177302] usb-storage: Attempting to get CSW...
[  164.177304] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.177416] usb-storage: Status code 0; transferred 13/13
[  164.177418] usb-storage: -- transfer complete
[  164.177419] usb-storage: Bulk status result = 0
[  164.177421] usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x1
[  164.177423] usb-storage: -- transport indicates command failure
[  164.177424] usb-storage: Issuing auto-REQUEST_SENSE
[  164.177427] usb-storage: Bulk Command S 0x43425355 T 0x1b L 18 F 128 Trg 0 LUN 0 CL 6
[  164.177429] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.177541] usb-storage: Status code 0; transferred 31/31
[  164.177542] usb-storage: -- transfer complete
[  164.177543] usb-storage: Bulk command transfer result=0
[  164.177545] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.177666] usb-storage: Status code 0; transferred 18/18
[  164.177668] usb-storage: -- transfer complete
[  164.177669] usb-storage: Bulk data transfer result 0x0
[  164.177670] usb-storage: Attempting to get CSW...
[  164.177671] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.177791] usb-storage: Status code 0; transferred 13/13
[  164.177792] usb-storage: -- transfer complete
[  164.177793] usb-storage: Bulk status result = 0
[  164.177795] usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0
[  164.177797] usb-storage: -- Result from auto-sense is 0
[  164.177799] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.177803] usb-storage: Not Ready: Medium not present
[  164.177806] usb-storage: scsi cmd done, result=0x2
[  164.177808] usb-storage: *** thread sleeping.
[  164.178766] usb-storage: queuecommand_lck called
[  164.178788] usb-storage: *** thread awakened.
[  164.178790] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  164.178791] usb-storage:  00 00 00 00 00 00
[  164.178797] usb-storage: Bulk Command S 0x43425355 T 0x1c L 0 F 0 Trg 0 LUN 0 CL 6
[  164.178799] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.178922] usb-storage: Status code 0; transferred 31/31
[  164.178923] usb-storage: -- transfer complete
[  164.178925] usb-storage: Bulk command transfer result=0
[  164.178926] usb-storage: Attempting to get CSW...
[  164.178928] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.179040] usb-storage: Status code 0; transferred 13/13
[  164.179041] usb-storage: -- transfer complete
[  164.179042] usb-storage: Bulk status result = 0
[  164.179044] usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x1
[  164.179046] usb-storage: -- transport indicates command failure
[  164.179047] usb-storage: Issuing auto-REQUEST_SENSE
[  164.179051] usb-storage: Bulk Command S 0x43425355 T 0x1d L 18 F 128 Trg 0 LUN 0 CL 6
[  164.179052] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  164.179165] usb-storage: Status code 0; transferred 31/31
[  164.179166] usb-storage: -- transfer complete
[  164.179167] usb-storage: Bulk command transfer result=0
[  164.179169] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  164.179290] usb-storage: Status code 0; transferred 18/18
[  164.179292] usb-storage: -- transfer complete
[  164.179293] usb-storage: Bulk data transfer result 0x0
[  164.179294] usb-storage: Attempting to get CSW...
[  164.179295] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  164.179414] usb-storage: Status code 0; transferred 13/13
[  164.179415] usb-storage: -- transfer complete
[  164.179417] usb-storage: Bulk status result = 0
[  164.179418] usb-storage: Bulk Status S 0x53425355 T 0x1d R 0 Stat 0x0
[  164.179420] usb-storage: -- Result from auto-sense is 0
[  164.179422] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  164.179426] usb-storage: Not Ready: Medium not present
[  164.179428] usb-storage: scsi cmd done, result=0x2
[  164.179430] usb-storage: *** thread sleeping.
[  166.003839] usb-storage: queuecommand_lck called
[  166.003847] usb-storage: *** thread awakened.
[  166.003849] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  166.003851] usb-storage:  00 00 00 00 00 00
[  166.003857] usb-storage: Bulk Command S 0x43425355 T 0x1e L 0 F 0 Trg 0 LUN 0 CL 6
[  166.003859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.003939] usb-storage: Status code 0; transferred 31/31
[  166.003940] usb-storage: -- transfer complete
[  166.003942] usb-storage: Bulk command transfer result=0
[  166.003943] usb-storage: Attempting to get CSW...
[  166.003945] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.004186] usb-storage: Status code 0; transferred 13/13
[  166.004187] usb-storage: -- transfer complete
[  166.004188] usb-storage: Bulk status result = 0
[  166.004190] usb-storage: Bulk Status S 0x53425355 T 0x1e R 0 Stat 0x1
[  166.004192] usb-storage: -- transport indicates command failure
[  166.004193] usb-storage: Issuing auto-REQUEST_SENSE
[  166.004196] usb-storage: Bulk Command S 0x43425355 T 0x1f L 18 F 128 Trg 0 LUN 0 CL 6
[  166.004198] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.004310] usb-storage: Status code 0; transferred 31/31
[  166.004311] usb-storage: -- transfer complete
[  166.004312] usb-storage: Bulk command transfer result=0
[  166.004314] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  166.004436] usb-storage: Status code 0; transferred 18/18
[  166.004437] usb-storage: -- transfer complete
[  166.004439] usb-storage: Bulk data transfer result 0x0
[  166.004440] usb-storage: Attempting to get CSW...
[  166.004441] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.004559] usb-storage: Status code 0; transferred 13/13
[  166.004560] usb-storage: -- transfer complete
[  166.004562] usb-storage: Bulk status result = 0
[  166.004564] usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0
[  166.004566] usb-storage: -- Result from auto-sense is 0
[  166.004567] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  166.004571] usb-storage: Not Ready: Medium not present
[  166.004574] usb-storage: scsi cmd done, result=0x2
[  166.004575] usb-storage: *** thread sleeping.
[  166.004587] usb-storage: queuecommand_lck called
[  166.004590] usb-storage: *** thread awakened.
[  166.004592] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  166.004593] usb-storage:  00 00 00 00 00 00
[  166.004597] usb-storage: Bulk Command S 0x43425355 T 0x20 L 0 F 0 Trg 0 LUN 0 CL 6
[  166.004599] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.004685] usb-storage: Status code 0; transferred 31/31
[  166.004686] usb-storage: -- transfer complete
[  166.004688] usb-storage: Bulk command transfer result=0
[  166.004689] usb-storage: Attempting to get CSW...
[  166.004690] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.004809] usb-storage: Status code 0; transferred 13/13
[  166.004811] usb-storage: -- transfer complete
[  166.004812] usb-storage: Bulk status result = 0
[  166.004814] usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x1
[  166.004815] usb-storage: -- transport indicates command failure
[  166.004816] usb-storage: Issuing auto-REQUEST_SENSE
[  166.004818] usb-storage: Bulk Command S 0x43425355 T 0x21 L 18 F 128 Trg 0 LUN 0 CL 6
[  166.004820] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.004934] usb-storage: Status code 0; transferred 31/31
[  166.004935] usb-storage: -- transfer complete
[  166.004936] usb-storage: Bulk command transfer result=0
[  166.004938] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  166.005059] usb-storage: Status code 0; transferred 18/18
[  166.005061] usb-storage: -- transfer complete
[  166.005062] usb-storage: Bulk data transfer result 0x0
[  166.005063] usb-storage: Attempting to get CSW...
[  166.005064] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.005185] usb-storage: Status code 0; transferred 13/13
[  166.005186] usb-storage: -- transfer complete
[  166.005187] usb-storage: Bulk status result = 0
[  166.005189] usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x0
[  166.005190] usb-storage: -- Result from auto-sense is 0
[  166.005192] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  166.005194] usb-storage: Not Ready: Medium not present
[  166.005196] usb-storage: scsi cmd done, result=0x2
[  166.005197] usb-storage: *** thread sleeping.
[  166.005204] usb-storage: queuecommand_lck called
[  166.005206] usb-storage: *** thread awakened.
[  166.005208] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  166.005209] usb-storage:  1e 00 00 00 01 00
[  166.005213] usb-storage: Bulk Command S 0x43425355 T 0x22 L 0 F 0 Trg 0 LUN 0 CL 6
[  166.005214] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.005309] usb-storage: Status code 0; transferred 31/31
[  166.005310] usb-storage: -- transfer complete
[  166.005312] usb-storage: Bulk command transfer result=0
[  166.005313] usb-storage: Attempting to get CSW...
[  166.005314] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.005435] usb-storage: Status code 0; transferred 13/13
[  166.005436] usb-storage: -- transfer complete
[  166.005437] usb-storage: Bulk status result = 0
[  166.005439] usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0
[  166.005440] usb-storage: scsi cmd done, result=0x0
[  166.005442] usb-storage: *** thread sleeping.
[  166.005450] usb-storage: queuecommand_lck called
[  166.005455] usb-storage: *** thread awakened.
[  166.005457] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  166.005458] usb-storage:  1e 00 00 00 00 00
[  166.005462] usb-storage: Bulk Command S 0x43425355 T 0x23 L 0 F 0 Trg 0 LUN 0 CL 6
[  166.005464] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.005560] usb-storage: Status code 0; transferred 31/31
[  166.005561] usb-storage: -- transfer complete
[  166.005562] usb-storage: Bulk command transfer result=0
[  166.005563] usb-storage: Attempting to get CSW...
[  166.005565] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.005684] usb-storage: Status code 0; transferred 13/13
[  166.005685] usb-storage: -- transfer complete
[  166.005686] usb-storage: Bulk status result = 0
[  166.005688] usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
[  166.005689] usb-storage: scsi cmd done, result=0x0
[  166.005691] usb-storage: *** thread sleeping.
[  166.005694] usb-storage: queuecommand_lck called
[  166.005697] usb-storage: *** thread awakened.
[  166.005698] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  166.005699] usb-storage:  00 00 00 00 00 00
[  166.005703] usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 0 CL 6
[  166.005705] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.005810] usb-storage: Status code 0; transferred 31/31
[  166.005812] usb-storage: -- transfer complete
[  166.005813] usb-storage: Bulk command transfer result=0
[  166.005814] usb-storage: Attempting to get CSW...
[  166.005815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.005934] usb-storage: Status code 0; transferred 13/13
[  166.005935] usb-storage: -- transfer complete
[  166.005936] usb-storage: Bulk status result = 0
[  166.005938] usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x1
[  166.005939] usb-storage: -- transport indicates command failure
[  166.005941] usb-storage: Issuing auto-REQUEST_SENSE
[  166.005943] usb-storage: Bulk Command S 0x43425355 T 0x25 L 18 F 128 Trg 0 LUN 0 CL 6
[  166.005945] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  166.006059] usb-storage: Status code 0; transferred 31/31
[  166.006060] usb-storage: -- transfer complete
[  166.006061] usb-storage: Bulk command transfer result=0
[  166.006063] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  166.006185] usb-storage: Status code 0; transferred 18/18
[  166.006186] usb-storage: -- transfer complete
[  166.006187] usb-storage: Bulk data transfer result 0x0
[  166.006188] usb-storage: Attempting to get CSW...
[  166.006190] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  166.006309] usb-storage: Status code 0; transferred 13/13
[  166.006310] usb-storage: -- transfer complete
[  166.006311] usb-storage: Bulk status result = 0
[  166.006313] usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x0
[  166.006315] usb-storage: -- Result from auto-sense is 0
[  166.006316] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  166.006319] usb-storage: Not Ready: Medium not present
[  166.006320] usb-storage: scsi cmd done, result=0x2
[  166.006322] usb-storage: *** thread sleeping.
[  168.003782] usb-storage: queuecommand_lck called
[  168.003790] usb-storage: *** thread awakened.
[  168.003793] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  168.003794] usb-storage:  00 00 00 00 00 00
[  168.003800] usb-storage: Bulk Command S 0x43425355 T 0x26 L 0 F 0 Trg 0 LUN 0 CL 6
[  168.003802] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.003942] usb-storage: Status code 0; transferred 31/31
[  168.003944] usb-storage: -- transfer complete
[  168.003945] usb-storage: Bulk command transfer result=0
[  168.003946] usb-storage: Attempting to get CSW...
[  168.003948] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.005063] usb-storage: Status code 0; transferred 13/13
[  168.005065] usb-storage: -- transfer complete
[  168.005066] usb-storage: Bulk status result = 0
[  168.005068] usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x1
[  168.005070] usb-storage: -- transport indicates command failure
[  168.005071] usb-storage: Issuing auto-REQUEST_SENSE
[  168.005074] usb-storage: Bulk Command S 0x43425355 T 0x27 L 18 F 128 Trg 0 LUN 0 CL 6
[  168.005076] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.005188] usb-storage: Status code 0; transferred 31/31
[  168.005189] usb-storage: -- transfer complete
[  168.005190] usb-storage: Bulk command transfer result=0
[  168.005192] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  168.005314] usb-storage: Status code 0; transferred 18/18
[  168.005315] usb-storage: -- transfer complete
[  168.005316] usb-storage: Bulk data transfer result 0x0
[  168.005318] usb-storage: Attempting to get CSW...
[  168.005319] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.005439] usb-storage: Status code 0; transferred 13/13
[  168.005440] usb-storage: -- transfer complete
[  168.005441] usb-storage: Bulk status result = 0
[  168.005443] usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x0
[  168.005445] usb-storage: -- Result from auto-sense is 0
[  168.005447] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  168.005451] usb-storage: Not Ready: Medium not present
[  168.005453] usb-storage: scsi cmd done, result=0x2
[  168.005455] usb-storage: *** thread sleeping.
[  168.005467] usb-storage: queuecommand_lck called
[  168.005470] usb-storage: *** thread awakened.
[  168.005472] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  168.005473] usb-storage:  00 00 00 00 00 00
[  168.005477] usb-storage: Bulk Command S 0x43425355 T 0x28 L 0 F 0 Trg 0 LUN 0 CL 6
[  168.005479] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.005563] usb-storage: Status code 0; transferred 31/31
[  168.005565] usb-storage: -- transfer complete
[  168.005566] usb-storage: Bulk command transfer result=0
[  168.005567] usb-storage: Attempting to get CSW...
[  168.005568] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.005688] usb-storage: Status code 0; transferred 13/13
[  168.005689] usb-storage: -- transfer complete
[  168.005690] usb-storage: Bulk status result = 0
[  168.005692] usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x1
[  168.005694] usb-storage: -- transport indicates command failure
[  168.005695] usb-storage: Issuing auto-REQUEST_SENSE
[  168.005697] usb-storage: Bulk Command S 0x43425355 T 0x29 L 18 F 128 Trg 0 LUN 0 CL 6
[  168.005699] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.005813] usb-storage: Status code 0; transferred 31/31
[  168.005814] usb-storage: -- transfer complete
[  168.005815] usb-storage: Bulk command transfer result=0
[  168.005817] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  168.005937] usb-storage: Status code 0; transferred 18/18
[  168.005939] usb-storage: -- transfer complete
[  168.005940] usb-storage: Bulk data transfer result 0x0
[  168.005941] usb-storage: Attempting to get CSW...
[  168.005942] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.006063] usb-storage: Status code 0; transferred 13/13
[  168.006064] usb-storage: -- transfer complete
[  168.006065] usb-storage: Bulk status result = 0
[  168.006067] usb-storage: Bulk Status S 0x53425355 T 0x29 R 0 Stat 0x0
[  168.006069] usb-storage: -- Result from auto-sense is 0
[  168.006070] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  168.006073] usb-storage: Not Ready: Medium not present
[  168.006074] usb-storage: scsi cmd done, result=0x2
[  168.006076] usb-storage: *** thread sleeping.
[  168.006082] usb-storage: queuecommand_lck called
[  168.006084] usb-storage: *** thread awakened.
[  168.006086] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  168.006087] usb-storage:  1e 00 00 00 01 00
[  168.006091] usb-storage: Bulk Command S 0x43425355 T 0x2a L 0 F 0 Trg 0 LUN 0 CL 6
[  168.006092] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.006188] usb-storage: Status code 0; transferred 31/31
[  168.006189] usb-storage: -- transfer complete
[  168.006190] usb-storage: Bulk command transfer result=0
[  168.006191] usb-storage: Attempting to get CSW...
[  168.006193] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.006313] usb-storage: Status code 0; transferred 13/13
[  168.006314] usb-storage: -- transfer complete
[  168.006315] usb-storage: Bulk status result = 0
[  168.006317] usb-storage: Bulk Status S 0x53425355 T 0x2a R 0 Stat 0x0
[  168.006318] usb-storage: scsi cmd done, result=0x0
[  168.006320] usb-storage: *** thread sleeping.
[  168.006328] usb-storage: queuecommand_lck called
[  168.006333] usb-storage: *** thread awakened.
[  168.006334] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  168.006335] usb-storage:  1e 00 00 00 00 00
[  168.006339] usb-storage: Bulk Command S 0x43425355 T 0x2b L 0 F 0 Trg 0 LUN 0 CL 6
[  168.006341] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.006439] usb-storage: Status code 0; transferred 31/31
[  168.006440] usb-storage: -- transfer complete
[  168.006441] usb-storage: Bulk command transfer result=0
[  168.006442] usb-storage: Attempting to get CSW...
[  168.006444] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.006563] usb-storage: Status code 0; transferred 13/13
[  168.006564] usb-storage: -- transfer complete
[  168.006565] usb-storage: Bulk status result = 0
[  168.006567] usb-storage: Bulk Status S 0x53425355 T 0x2b R 0 Stat 0x0
[  168.006568] usb-storage: scsi cmd done, result=0x0
[  168.006570] usb-storage: *** thread sleeping.
[  168.006573] usb-storage: queuecommand_lck called
[  168.006576] usb-storage: *** thread awakened.
[  168.006577] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  168.006578] usb-storage:  00 00 00 00 00 00
[  168.006582] usb-storage: Bulk Command S 0x43425355 T 0x2c L 0 F 0 Trg 0 LUN 0 CL 6
[  168.006584] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.006688] usb-storage: Status code 0; transferred 31/31
[  168.006689] usb-storage: -- transfer complete
[  168.006690] usb-storage: Bulk command transfer result=0
[  168.006692] usb-storage: Attempting to get CSW...
[  168.006693] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.006813] usb-storage: Status code 0; transferred 13/13
[  168.006814] usb-storage: -- transfer complete
[  168.006815] usb-storage: Bulk status result = 0
[  168.006817] usb-storage: Bulk Status S 0x53425355 T 0x2c R 0 Stat 0x1
[  168.006819] usb-storage: -- transport indicates command failure
[  168.006820] usb-storage: Issuing auto-REQUEST_SENSE
[  168.006822] usb-storage: Bulk Command S 0x43425355 T 0x2d L 18 F 128 Trg 0 LUN 0 CL 6
[  168.006824] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  168.006937] usb-storage: Status code 0; transferred 31/31
[  168.006939] usb-storage: -- transfer complete
[  168.006940] usb-storage: Bulk command transfer result=0
[  168.006941] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  168.007063] usb-storage: Status code 0; transferred 18/18
[  168.007064] usb-storage: -- transfer complete
[  168.007065] usb-storage: Bulk data transfer result 0x0
[  168.007066] usb-storage: Attempting to get CSW...
[  168.007068] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  168.007188] usb-storage: Status code 0; transferred 13/13
[  168.007189] usb-storage: -- transfer complete
[  168.007190] usb-storage: Bulk status result = 0
[  168.007192] usb-storage: Bulk Status S 0x53425355 T 0x2d R 0 Stat 0x0
[  168.007194] usb-storage: -- Result from auto-sense is 0
[  168.007195] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  168.007197] usb-storage: Not Ready: Medium not present
[  168.007199] usb-storage: scsi cmd done, result=0x2
[  168.007200] usb-storage: *** thread sleeping.
[  170.003609] usb-storage: queuecommand_lck called
[  170.003617] usb-storage: *** thread awakened.
[  170.003620] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  170.003621] usb-storage:  00 00 00 00 00 00
[  170.003627] usb-storage: Bulk Command S 0x43425355 T 0x2e L 0 F 0 Trg 0 LUN 0 CL 6
[  170.003629] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.003696] usb-storage: Status code 0; transferred 31/31
[  170.003697] usb-storage: -- transfer complete
[  170.003699] usb-storage: Bulk command transfer result=0
[  170.003700] usb-storage: Attempting to get CSW...
[  170.003702] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.003942] usb-storage: Status code 0; transferred 13/13
[  170.003943] usb-storage: -- transfer complete
[  170.003944] usb-storage: Bulk status result = 0
[  170.003946] usb-storage: Bulk Status S 0x53425355 T 0x2e R 0 Stat 0x1
[  170.003948] usb-storage: -- transport indicates command failure
[  170.003949] usb-storage: Issuing auto-REQUEST_SENSE
[  170.003952] usb-storage: Bulk Command S 0x43425355 T 0x2f L 18 F 128 Trg 0 LUN 0 CL 6
[  170.003954] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.004067] usb-storage: Status code 0; transferred 31/31
[  170.004068] usb-storage: -- transfer complete
[  170.004069] usb-storage: Bulk command transfer result=0
[  170.004071] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  170.004203] usb-storage: Status code 0; transferred 18/18
[  170.004204] usb-storage: -- transfer complete
[  170.004206] usb-storage: Bulk data transfer result 0x0
[  170.004207] usb-storage: Attempting to get CSW...
[  170.004208] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.004316] usb-storage: Status code 0; transferred 13/13
[  170.004318] usb-storage: -- transfer complete
[  170.004319] usb-storage: Bulk status result = 0
[  170.004321] usb-storage: Bulk Status S 0x53425355 T 0x2f R 0 Stat 0x0
[  170.004323] usb-storage: -- Result from auto-sense is 0
[  170.004324] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  170.004328] usb-storage: Not Ready: Medium not present
[  170.004331] usb-storage: scsi cmd done, result=0x2
[  170.004333] usb-storage: *** thread sleeping.
[  170.004344] usb-storage: queuecommand_lck called
[  170.004347] usb-storage: *** thread awakened.
[  170.004349] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  170.004350] usb-storage:  00 00 00 00 00 00
[  170.004354] usb-storage: Bulk Command S 0x43425355 T 0x30 L 0 F 0 Trg 0 LUN 0 CL 6
[  170.004356] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.004442] usb-storage: Status code 0; transferred 31/31
[  170.004444] usb-storage: -- transfer complete
[  170.004445] usb-storage: Bulk command transfer result=0
[  170.004446] usb-storage: Attempting to get CSW...
[  170.004447] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.004566] usb-storage: Status code 0; transferred 13/13
[  170.004567] usb-storage: -- transfer complete
[  170.004569] usb-storage: Bulk status result = 0
[  170.004570] usb-storage: Bulk Status S 0x53425355 T 0x30 R 0 Stat 0x1
[  170.004572] usb-storage: -- transport indicates command failure
[  170.004573] usb-storage: Issuing auto-REQUEST_SENSE
[  170.004575] usb-storage: Bulk Command S 0x43425355 T 0x31 L 18 F 128 Trg 0 LUN 0 CL 6
[  170.004577] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.004691] usb-storage: Status code 0; transferred 31/31
[  170.004692] usb-storage: -- transfer complete
[  170.004693] usb-storage: Bulk command transfer result=0
[  170.004695] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  170.004816] usb-storage: Status code 0; transferred 18/18
[  170.004818] usb-storage: -- transfer complete
[  170.004819] usb-storage: Bulk data transfer result 0x0
[  170.004820] usb-storage: Attempting to get CSW...
[  170.004821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.004941] usb-storage: Status code 0; transferred 13/13
[  170.004943] usb-storage: -- transfer complete
[  170.004944] usb-storage: Bulk status result = 0
[  170.004946] usb-storage: Bulk Status S 0x53425355 T 0x31 R 0 Stat 0x0
[  170.004947] usb-storage: -- Result from auto-sense is 0
[  170.004949] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  170.004951] usb-storage: Not Ready: Medium not present
[  170.004953] usb-storage: scsi cmd done, result=0x2
[  170.004954] usb-storage: *** thread sleeping.
[  170.004960] usb-storage: queuecommand_lck called
[  170.004962] usb-storage: *** thread awakened.
[  170.004964] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  170.004965] usb-storage:  1e 00 00 00 01 00
[  170.004969] usb-storage: Bulk Command S 0x43425355 T 0x32 L 0 F 0 Trg 0 LUN 0 CL 6
[  170.004971] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.005066] usb-storage: Status code 0; transferred 31/31
[  170.005067] usb-storage: -- transfer complete
[  170.005068] usb-storage: Bulk command transfer result=0
[  170.005070] usb-storage: Attempting to get CSW...
[  170.005071] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.005191] usb-storage: Status code 0; transferred 13/13
[  170.005193] usb-storage: -- transfer complete
[  170.005194] usb-storage: Bulk status result = 0
[  170.005196] usb-storage: Bulk Status S 0x53425355 T 0x32 R 0 Stat 0x0
[  170.005197] usb-storage: scsi cmd done, result=0x0
[  170.005199] usb-storage: *** thread sleeping.
[  170.005207] usb-storage: queuecommand_lck called
[  170.005211] usb-storage: *** thread awakened.
[  170.005213] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  170.005214] usb-storage:  1e 00 00 00 00 00
[  170.005218] usb-storage: Bulk Command S 0x43425355 T 0x33 L 0 F 0 Trg 0 LUN 0 CL 6
[  170.005220] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.005317] usb-storage: Status code 0; transferred 31/31
[  170.005318] usb-storage: -- transfer complete
[  170.005319] usb-storage: Bulk command transfer result=0
[  170.005320] usb-storage: Attempting to get CSW...
[  170.005322] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.005441] usb-storage: Status code 0; transferred 13/13
[  170.005442] usb-storage: -- transfer complete
[  170.005443] usb-storage: Bulk status result = 0
[  170.005445] usb-storage: Bulk Status S 0x53425355 T 0x33 R 0 Stat 0x0
[  170.005446] usb-storage: scsi cmd done, result=0x0
[  170.005448] usb-storage: *** thread sleeping.
[  170.005451] usb-storage: queuecommand_lck called
[  170.005453] usb-storage: *** thread awakened.
[  170.005455] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  170.005456] usb-storage:  00 00 00 00 00 00
[  170.005460] usb-storage: Bulk Command S 0x43425355 T 0x34 L 0 F 0 Trg 0 LUN 0 CL 6
[  170.005461] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.005567] usb-storage: Status code 0; transferred 31/31
[  170.005568] usb-storage: -- transfer complete
[  170.005570] usb-storage: Bulk command transfer result=0
[  170.005571] usb-storage: Attempting to get CSW...
[  170.005572] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.005693] usb-storage: Status code 0; transferred 13/13
[  170.005694] usb-storage: -- transfer complete
[  170.005695] usb-storage: Bulk status result = 0
[  170.005697] usb-storage: Bulk Status S 0x53425355 T 0x34 R 0 Stat 0x1
[  170.005698] usb-storage: -- transport indicates command failure
[  170.005699] usb-storage: Issuing auto-REQUEST_SENSE
[  170.005702] usb-storage: Bulk Command S 0x43425355 T 0x35 L 18 F 128 Trg 0 LUN 0 CL 6
[  170.005703] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  170.005816] usb-storage: Status code 0; transferred 31/31
[  170.005817] usb-storage: -- transfer complete
[  170.005818] usb-storage: Bulk command transfer result=0
[  170.005820] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  170.005942] usb-storage: Status code 0; transferred 18/18
[  170.005943] usb-storage: -- transfer complete
[  170.005944] usb-storage: Bulk data transfer result 0x0
[  170.005945] usb-storage: Attempting to get CSW...
[  170.005947] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  170.006066] usb-storage: Status code 0; transferred 13/13
[  170.006068] usb-storage: -- transfer complete
[  170.006069] usb-storage: Bulk status result = 0
[  170.006071] usb-storage: Bulk Status S 0x53425355 T 0x35 R 0 Stat 0x0
[  170.006072] usb-storage: -- Result from auto-sense is 0
[  170.006074] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  170.006076] usb-storage: Not Ready: Medium not present
[  170.006078] usb-storage: scsi cmd done, result=0x2
[  170.006079] usb-storage: *** thread sleeping.
[  172.002236] usb-storage: queuecommand_lck called
[  172.002244] usb-storage: *** thread awakened.
[  172.002247] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  172.002248] usb-storage:  00 00 00 00 00 00
[  172.002254] usb-storage: Bulk Command S 0x43425355 T 0x36 L 0 F 0 Trg 0 LUN 0 CL 6
[  172.002256] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.002325] usb-storage: Status code 0; transferred 31/31
[  172.002327] usb-storage: -- transfer complete
[  172.002328] usb-storage: Bulk command transfer result=0
[  172.002329] usb-storage: Attempting to get CSW...
[  172.002331] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.002828] usb-storage: Status code 0; transferred 13/13
[  172.002829] usb-storage: -- transfer complete
[  172.002831] usb-storage: Bulk status result = 0
[  172.002833] usb-storage: Bulk Status S 0x53425355 T 0x36 R 0 Stat 0x1
[  172.002834] usb-storage: -- transport indicates command failure
[  172.002836] usb-storage: Issuing auto-REQUEST_SENSE
[  172.002838] usb-storage: Bulk Command S 0x43425355 T 0x37 L 18 F 128 Trg 0 LUN 0 CL 6
[  172.002840] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.002946] usb-storage: Status code 0; transferred 31/31
[  172.002947] usb-storage: -- transfer complete
[  172.002948] usb-storage: Bulk command transfer result=0
[  172.002950] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  172.003071] usb-storage: Status code 0; transferred 18/18
[  172.003072] usb-storage: -- transfer complete
[  172.003073] usb-storage: Bulk data transfer result 0x0
[  172.003074] usb-storage: Attempting to get CSW...
[  172.003075] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.003195] usb-storage: Status code 0; transferred 13/13
[  172.003196] usb-storage: -- transfer complete
[  172.003198] usb-storage: Bulk status result = 0
[  172.003200] usb-storage: Bulk Status S 0x53425355 T 0x37 R 0 Stat 0x0
[  172.003202] usb-storage: -- Result from auto-sense is 0
[  172.003203] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  172.003207] usb-storage: Not Ready: Medium not present
[  172.003209] usb-storage: scsi cmd done, result=0x2
[  172.003211] usb-storage: *** thread sleeping.
[  172.003223] usb-storage: queuecommand_lck called
[  172.003227] usb-storage: *** thread awakened.
[  172.003228] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  172.003229] usb-storage:  00 00 00 00 00 00
[  172.003233] usb-storage: Bulk Command S 0x43425355 T 0x38 L 0 F 0 Trg 0 LUN 0 CL 6
[  172.003235] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.003321] usb-storage: Status code 0; transferred 31/31
[  172.003322] usb-storage: -- transfer complete
[  172.003323] usb-storage: Bulk command transfer result=0
[  172.003324] usb-storage: Attempting to get CSW...
[  172.003326] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.003444] usb-storage: Status code 0; transferred 13/13
[  172.003445] usb-storage: -- transfer complete
[  172.003447] usb-storage: Bulk status result = 0
[  172.003449] usb-storage: Bulk Status S 0x53425355 T 0x38 R 0 Stat 0x1
[  172.003450] usb-storage: -- transport indicates command failure
[  172.003451] usb-storage: Issuing auto-REQUEST_SENSE
[  172.003453] usb-storage: Bulk Command S 0x43425355 T 0x39 L 18 F 128 Trg 0 LUN 0 CL 6
[  172.003455] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.003570] usb-storage: Status code 0; transferred 31/31
[  172.003571] usb-storage: -- transfer complete
[  172.003573] usb-storage: Bulk command transfer result=0
[  172.003574] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  172.003695] usb-storage: Status code 0; transferred 18/18
[  172.003696] usb-storage: -- transfer complete
[  172.003697] usb-storage: Bulk data transfer result 0x0
[  172.003698] usb-storage: Attempting to get CSW...
[  172.003700] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.003820] usb-storage: Status code 0; transferred 13/13
[  172.003821] usb-storage: -- transfer complete
[  172.003822] usb-storage: Bulk status result = 0
[  172.003824] usb-storage: Bulk Status S 0x53425355 T 0x39 R 0 Stat 0x0
[  172.003825] usb-storage: -- Result from auto-sense is 0
[  172.003827] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  172.003829] usb-storage: Not Ready: Medium not present
[  172.003831] usb-storage: scsi cmd done, result=0x2
[  172.003832] usb-storage: *** thread sleeping.
[  172.003838] usb-storage: queuecommand_lck called
[  172.003841] usb-storage: *** thread awakened.
[  172.003842] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  172.003843] usb-storage:  1e 00 00 00 01 00
[  172.003847] usb-storage: Bulk Command S 0x43425355 T 0x3a L 0 F 0 Trg 0 LUN 0 CL 6
[  172.003849] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.003945] usb-storage: Status code 0; transferred 31/31
[  172.003947] usb-storage: -- transfer complete
[  172.003948] usb-storage: Bulk command transfer result=0
[  172.003949] usb-storage: Attempting to get CSW...
[  172.003951] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.004070] usb-storage: Status code 0; transferred 13/13
[  172.004071] usb-storage: -- transfer complete
[  172.004072] usb-storage: Bulk status result = 0
[  172.004074] usb-storage: Bulk Status S 0x53425355 T 0x3a R 0 Stat 0x0
[  172.004076] usb-storage: scsi cmd done, result=0x0
[  172.004077] usb-storage: *** thread sleeping.
[  172.004085] usb-storage: queuecommand_lck called
[  172.004090] usb-storage: *** thread awakened.
[  172.004091] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  172.004092] usb-storage:  1e 00 00 00 00 00
[  172.004097] usb-storage: Bulk Command S 0x43425355 T 0x3b L 0 F 0 Trg 0 LUN 0 CL 6
[  172.004098] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.004195] usb-storage: Status code 0; transferred 31/31
[  172.004196] usb-storage: -- transfer complete
[  172.004197] usb-storage: Bulk command transfer result=0
[  172.004198] usb-storage: Attempting to get CSW...
[  172.004200] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.004320] usb-storage: Status code 0; transferred 13/13
[  172.004321] usb-storage: -- transfer complete
[  172.004322] usb-storage: Bulk status result = 0
[  172.004324] usb-storage: Bulk Status S 0x53425355 T 0x3b R 0 Stat 0x0
[  172.004326] usb-storage: scsi cmd done, result=0x0
[  172.004327] usb-storage: *** thread sleeping.
[  172.004330] usb-storage: queuecommand_lck called
[  172.004333] usb-storage: *** thread awakened.
[  172.004334] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  172.004335] usb-storage:  00 00 00 00 00 00
[  172.004339] usb-storage: Bulk Command S 0x43425355 T 0x3c L 0 F 0 Trg 0 LUN 0 CL 6
[  172.004341] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.004445] usb-storage: Status code 0; transferred 31/31
[  172.004447] usb-storage: -- transfer complete
[  172.004448] usb-storage: Bulk command transfer result=0
[  172.004449] usb-storage: Attempting to get CSW...
[  172.004451] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.004569] usb-storage: Status code 0; transferred 13/13
[  172.004570] usb-storage: -- transfer complete
[  172.004572] usb-storage: Bulk status result = 0
[  172.004573] usb-storage: Bulk Status S 0x53425355 T 0x3c R 0 Stat 0x1
[  172.004575] usb-storage: -- transport indicates command failure
[  172.004576] usb-storage: Issuing auto-REQUEST_SENSE
[  172.004578] usb-storage: Bulk Command S 0x43425355 T 0x3d L 18 F 128 Trg 0 LUN 0 CL 6
[  172.004580] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  172.004695] usb-storage: Status code 0; transferred 31/31
[  172.004696] usb-storage: -- transfer complete
[  172.004697] usb-storage: Bulk command transfer result=0
[  172.004699] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  172.004820] usb-storage: Status code 0; transferred 18/18
[  172.004821] usb-storage: -- transfer complete
[  172.004822] usb-storage: Bulk data transfer result 0x0
[  172.004823] usb-storage: Attempting to get CSW...
[  172.004825] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  172.004944] usb-storage: Status code 0; transferred 13/13
[  172.004945] usb-storage: -- transfer complete
[  172.004947] usb-storage: Bulk status result = 0
[  172.004949] usb-storage: Bulk Status S 0x53425355 T 0x3d R 0 Stat 0x0
[  172.004950] usb-storage: -- Result from auto-sense is 0
[  172.004952] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  172.004954] usb-storage: Not Ready: Medium not present
[  172.004956] usb-storage: scsi cmd done, result=0x2
[  172.004957] usb-storage: *** thread sleeping.
[  174.003373] usb-storage: queuecommand_lck called
[  174.003381] usb-storage: *** thread awakened.
[  174.003384] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  174.003385] usb-storage:  00 00 00 00 00 00
[  174.003391] usb-storage: Bulk Command S 0x43425355 T 0x3e L 0 F 0 Trg 0 LUN 0 CL 6
[  174.003393] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.003453] usb-storage: Status code 0; transferred 31/31
[  174.003454] usb-storage: -- transfer complete
[  174.003456] usb-storage: Bulk command transfer result=0
[  174.003457] usb-storage: Attempting to get CSW...
[  174.003458] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.003699] usb-storage: Status code 0; transferred 13/13
[  174.003700] usb-storage: -- transfer complete
[  174.003701] usb-storage: Bulk status result = 0
[  174.003703] usb-storage: Bulk Status S 0x53425355 T 0x3e R 0 Stat 0x1
[  174.003705] usb-storage: -- transport indicates command failure
[  174.003706] usb-storage: Issuing auto-REQUEST_SENSE
[  174.003709] usb-storage: Bulk Command S 0x43425355 T 0x3f L 18 F 128 Trg 0 LUN 0 CL 6
[  174.003711] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.003828] usb-storage: Status code 0; transferred 31/31
[  174.003829] usb-storage: -- transfer complete
[  174.003831] usb-storage: Bulk command transfer result=0
[  174.003832] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  174.003949] usb-storage: Status code 0; transferred 18/18
[  174.003950] usb-storage: -- transfer complete
[  174.003952] usb-storage: Bulk data transfer result 0x0
[  174.003953] usb-storage: Attempting to get CSW...
[  174.003972] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.004074] usb-storage: Status code 0; transferred 13/13
[  174.004075] usb-storage: -- transfer complete
[  174.004077] usb-storage: Bulk status result = 0
[  174.004078] usb-storage: Bulk Status S 0x53425355 T 0x3f R 0 Stat 0x0
[  174.004081] usb-storage: -- Result from auto-sense is 0
[  174.004082] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  174.004086] usb-storage: Not Ready: Medium not present
[  174.004089] usb-storage: scsi cmd done, result=0x2
[  174.004090] usb-storage: *** thread sleeping.
[  174.004103] usb-storage: queuecommand_lck called
[  174.004106] usb-storage: *** thread awakened.
[  174.004108] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  174.004109] usb-storage:  00 00 00 00 00 00
[  174.004113] usb-storage: Bulk Command S 0x43425355 T 0x40 L 0 F 0 Trg 0 LUN 0 CL 6
[  174.004115] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.004199] usb-storage: Status code 0; transferred 31/31
[  174.004200] usb-storage: -- transfer complete
[  174.004201] usb-storage: Bulk command transfer result=0
[  174.004203] usb-storage: Attempting to get CSW...
[  174.004204] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.004323] usb-storage: Status code 0; transferred 13/13
[  174.004324] usb-storage: -- transfer complete
[  174.004325] usb-storage: Bulk status result = 0
[  174.004327] usb-storage: Bulk Status S 0x53425355 T 0x40 R 0 Stat 0x1
[  174.004328] usb-storage: -- transport indicates command failure
[  174.004329] usb-storage: Issuing auto-REQUEST_SENSE
[  174.004332] usb-storage: Bulk Command S 0x43425355 T 0x41 L 18 F 128 Trg 0 LUN 0 CL 6
[  174.004333] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.004448] usb-storage: Status code 0; transferred 31/31
[  174.004450] usb-storage: -- transfer complete
[  174.004451] usb-storage: Bulk command transfer result=0
[  174.004453] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  174.004573] usb-storage: Status code 0; transferred 18/18
[  174.004574] usb-storage: -- transfer complete
[  174.004576] usb-storage: Bulk data transfer result 0x0
[  174.004577] usb-storage: Attempting to get CSW...
[  174.004578] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.004698] usb-storage: Status code 0; transferred 13/13
[  174.004699] usb-storage: -- transfer complete
[  174.004700] usb-storage: Bulk status result = 0
[  174.004702] usb-storage: Bulk Status S 0x53425355 T 0x41 R 0 Stat 0x0
[  174.004704] usb-storage: -- Result from auto-sense is 0
[  174.004705] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  174.004708] usb-storage: Not Ready: Medium not present
[  174.004709] usb-storage: scsi cmd done, result=0x2
[  174.004711] usb-storage: *** thread sleeping.
[  174.004717] usb-storage: queuecommand_lck called
[  174.004719] usb-storage: *** thread awakened.
[  174.004720] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  174.004722] usb-storage:  1e 00 00 00 01 00
[  174.004726] usb-storage: Bulk Command S 0x43425355 T 0x42 L 0 F 0 Trg 0 LUN 0 CL 6
[  174.004727] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.004824] usb-storage: Status code 0; transferred 31/31
[  174.004825] usb-storage: -- transfer complete
[  174.004826] usb-storage: Bulk command transfer result=0
[  174.004827] usb-storage: Attempting to get CSW...
[  174.004829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.004948] usb-storage: Status code 0; transferred 13/13
[  174.004949] usb-storage: -- transfer complete
[  174.004951] usb-storage: Bulk status result = 0
[  174.004952] usb-storage: Bulk Status S 0x53425355 T 0x42 R 0 Stat 0x0
[  174.004954] usb-storage: scsi cmd done, result=0x0
[  174.004955] usb-storage: *** thread sleeping.
[  174.004964] usb-storage: queuecommand_lck called
[  174.004968] usb-storage: *** thread awakened.
[  174.004970] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  174.004971] usb-storage:  1e 00 00 00 00 00
[  174.004975] usb-storage: Bulk Command S 0x43425355 T 0x43 L 0 F 0 Trg 0 LUN 0 CL 6
[  174.004977] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.005073] usb-storage: Status code 0; transferred 31/31
[  174.005074] usb-storage: -- transfer complete
[  174.005076] usb-storage: Bulk command transfer result=0
[  174.005077] usb-storage: Attempting to get CSW...
[  174.005078] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.005198] usb-storage: Status code 0; transferred 13/13
[  174.005199] usb-storage: -- transfer complete
[  174.005201] usb-storage: Bulk status result = 0
[  174.005203] usb-storage: Bulk Status S 0x53425355 T 0x43 R 0 Stat 0x0
[  174.005204] usb-storage: scsi cmd done, result=0x0
[  174.005205] usb-storage: *** thread sleeping.
[  174.005209] usb-storage: queuecommand_lck called
[  174.005211] usb-storage: *** thread awakened.
[  174.005213] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  174.005214] usb-storage:  00 00 00 00 00 00
[  174.005218] usb-storage: Bulk Command S 0x43425355 T 0x44 L 0 F 0 Trg 0 LUN 0 CL 6
[  174.005219] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.005324] usb-storage: Status code 0; transferred 31/31
[  174.005325] usb-storage: -- transfer complete
[  174.005326] usb-storage: Bulk command transfer result=0
[  174.005328] usb-storage: Attempting to get CSW...
[  174.005329] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.005448] usb-storage: Status code 0; transferred 13/13
[  174.005449] usb-storage: -- transfer complete
[  174.005450] usb-storage: Bulk status result = 0
[  174.005452] usb-storage: Bulk Status S 0x53425355 T 0x44 R 0 Stat 0x1
[  174.005453] usb-storage: -- transport indicates command failure
[  174.005454] usb-storage: Issuing auto-REQUEST_SENSE
[  174.005457] usb-storage: Bulk Command S 0x43425355 T 0x45 L 18 F 128 Trg 0 LUN 0 CL 6
[  174.005458] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  174.005573] usb-storage: Status code 0; transferred 31/31
[  174.005574] usb-storage: -- transfer complete
[  174.005575] usb-storage: Bulk command transfer result=0
[  174.005577] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  174.005698] usb-storage: Status code 0; transferred 18/18
[  174.005699] usb-storage: -- transfer complete
[  174.005701] usb-storage: Bulk data transfer result 0x0
[  174.005702] usb-storage: Attempting to get CSW...
[  174.005703] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  174.005822] usb-storage: Status code 0; transferred 13/13
[  174.005824] usb-storage: -- transfer complete
[  174.005825] usb-storage: Bulk status result = 0
[  174.005827] usb-storage: Bulk Status S 0x53425355 T 0x45 R 0 Stat 0x0
[  174.005828] usb-storage: -- Result from auto-sense is 0
[  174.005830] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  174.005832] usb-storage: Not Ready: Medium not present
[  174.005834] usb-storage: scsi cmd done, result=0x2
[  174.005835] usb-storage: *** thread sleeping.
[  176.003253] usb-storage: queuecommand_lck called
[  176.003261] usb-storage: *** thread awakened.
[  176.003264] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  176.003265] usb-storage:  00 00 00 00 00 00
[  176.003271] usb-storage: Bulk Command S 0x43425355 T 0x46 L 0 F 0 Trg 0 LUN 0 CL 6
[  176.003273] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.003332] usb-storage: Status code 0; transferred 31/31
[  176.003333] usb-storage: -- transfer complete
[  176.003334] usb-storage: Bulk command transfer result=0
[  176.003336] usb-storage: Attempting to get CSW...
[  176.003337] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.003577] usb-storage: Status code 0; transferred 13/13
[  176.003578] usb-storage: -- transfer complete
[  176.003580] usb-storage: Bulk status result = 0
[  176.003582] usb-storage: Bulk Status S 0x53425355 T 0x46 R 0 Stat 0x1
[  176.003583] usb-storage: -- transport indicates command failure
[  176.003585] usb-storage: Issuing auto-REQUEST_SENSE
[  176.003588] usb-storage: Bulk Command S 0x43425355 T 0x47 L 18 F 128 Trg 0 LUN 0 CL 6
[  176.003589] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.003708] usb-storage: Status code 0; transferred 31/31
[  176.003709] usb-storage: -- transfer complete
[  176.003711] usb-storage: Bulk command transfer result=0
[  176.003713] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  176.003828] usb-storage: Status code 0; transferred 18/18
[  176.003829] usb-storage: -- transfer complete
[  176.003830] usb-storage: Bulk data transfer result 0x0
[  176.003831] usb-storage: Attempting to get CSW...
[  176.003832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.003952] usb-storage: Status code 0; transferred 13/13
[  176.003954] usb-storage: -- transfer complete
[  176.003955] usb-storage: Bulk status result = 0
[  176.003957] usb-storage: Bulk Status S 0x53425355 T 0x47 R 0 Stat 0x0
[  176.003959] usb-storage: -- Result from auto-sense is 0
[  176.003960] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  176.003964] usb-storage: Not Ready: Medium not present
[  176.003967] usb-storage: scsi cmd done, result=0x2
[  176.003968] usb-storage: *** thread sleeping.
[  176.003980] usb-storage: queuecommand_lck called
[  176.003984] usb-storage: *** thread awakened.
[  176.003985] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  176.003986] usb-storage:  00 00 00 00 00 00
[  176.003990] usb-storage: Bulk Command S 0x43425355 T 0x48 L 0 F 0 Trg 0 LUN 0 CL 6
[  176.003992] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.004077] usb-storage: Status code 0; transferred 31/31
[  176.004078] usb-storage: -- transfer complete
[  176.004079] usb-storage: Bulk command transfer result=0
[  176.004081] usb-storage: Attempting to get CSW...
[  176.004082] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.004203] usb-storage: Status code 0; transferred 13/13
[  176.004204] usb-storage: -- transfer complete
[  176.004205] usb-storage: Bulk status result = 0
[  176.004207] usb-storage: Bulk Status S 0x53425355 T 0x48 R 0 Stat 0x1
[  176.004209] usb-storage: -- transport indicates command failure
[  176.004210] usb-storage: Issuing auto-REQUEST_SENSE
[  176.004212] usb-storage: Bulk Command S 0x43425355 T 0x49 L 18 F 128 Trg 0 LUN 0 CL 6
[  176.004214] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.004327] usb-storage: Status code 0; transferred 31/31
[  176.004328] usb-storage: -- transfer complete
[  176.004329] usb-storage: Bulk command transfer result=0
[  176.004331] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  176.004451] usb-storage: Status code 0; transferred 18/18
[  176.004452] usb-storage: -- transfer complete
[  176.004454] usb-storage: Bulk data transfer result 0x0
[  176.004455] usb-storage: Attempting to get CSW...
[  176.004456] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.004577] usb-storage: Status code 0; transferred 13/13
[  176.004578] usb-storage: -- transfer complete
[  176.004579] usb-storage: Bulk status result = 0
[  176.004581] usb-storage: Bulk Status S 0x53425355 T 0x49 R 0 Stat 0x0
[  176.004582] usb-storage: -- Result from auto-sense is 0
[  176.004584] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  176.004586] usb-storage: Not Ready: Medium not present
[  176.004588] usb-storage: scsi cmd done, result=0x2
[  176.004590] usb-storage: *** thread sleeping.
[  176.004597] usb-storage: queuecommand_lck called
[  176.004599] usb-storage: *** thread awakened.
[  176.004601] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  176.004602] usb-storage:  1e 00 00 00 01 00
[  176.004606] usb-storage: Bulk Command S 0x43425355 T 0x4a L 0 F 0 Trg 0 LUN 0 CL 6
[  176.004607] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.004702] usb-storage: Status code 0; transferred 31/31
[  176.004703] usb-storage: -- transfer complete
[  176.004704] usb-storage: Bulk command transfer result=0
[  176.004706] usb-storage: Attempting to get CSW...
[  176.004707] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.004826] usb-storage: Status code 0; transferred 13/13
[  176.004827] usb-storage: -- transfer complete
[  176.004828] usb-storage: Bulk status result = 0
[  176.004830] usb-storage: Bulk Status S 0x53425355 T 0x4a R 0 Stat 0x0
[  176.004832] usb-storage: scsi cmd done, result=0x0
[  176.004833] usb-storage: *** thread sleeping.
[  176.004842] usb-storage: queuecommand_lck called
[  176.004846] usb-storage: *** thread awakened.
[  176.004848] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  176.004849] usb-storage:  1e 00 00 00 00 00
[  176.004853] usb-storage: Bulk Command S 0x43425355 T 0x4b L 0 F 0 Trg 0 LUN 0 CL 6
[  176.004854] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.004952] usb-storage: Status code 0; transferred 31/31
[  176.004953] usb-storage: -- transfer complete
[  176.004955] usb-storage: Bulk command transfer result=0
[  176.004956] usb-storage: Attempting to get CSW...
[  176.004957] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.005076] usb-storage: Status code 0; transferred 13/13
[  176.005078] usb-storage: -- transfer complete
[  176.005079] usb-storage: Bulk status result = 0
[  176.005081] usb-storage: Bulk Status S 0x53425355 T 0x4b R 0 Stat 0x0
[  176.005082] usb-storage: scsi cmd done, result=0x0
[  176.005084] usb-storage: *** thread sleeping.
[  176.005087] usb-storage: queuecommand_lck called
[  176.005089] usb-storage: *** thread awakened.
[  176.005091] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  176.005092] usb-storage:  00 00 00 00 00 00
[  176.005096] usb-storage: Bulk Command S 0x43425355 T 0x4c L 0 F 0 Trg 0 LUN 0 CL 6
[  176.005098] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.005201] usb-storage: Status code 0; transferred 31/31
[  176.005203] usb-storage: -- transfer complete
[  176.005204] usb-storage: Bulk command transfer result=0
[  176.005205] usb-storage: Attempting to get CSW...
[  176.005207] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.005327] usb-storage: Status code 0; transferred 13/13
[  176.005328] usb-storage: -- transfer complete
[  176.005329] usb-storage: Bulk status result = 0
[  176.005331] usb-storage: Bulk Status S 0x53425355 T 0x4c R 0 Stat 0x1
[  176.005332] usb-storage: -- transport indicates command failure
[  176.005333] usb-storage: Issuing auto-REQUEST_SENSE
[  176.005336] usb-storage: Bulk Command S 0x43425355 T 0x4d L 18 F 128 Trg 0 LUN 0 CL 6
[  176.005337] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  176.005451] usb-storage: Status code 0; transferred 31/31
[  176.005452] usb-storage: -- transfer complete
[  176.005454] usb-storage: Bulk command transfer result=0
[  176.005455] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  176.005577] usb-storage: Status code 0; transferred 18/18
[  176.005578] usb-storage: -- transfer complete
[  176.005579] usb-storage: Bulk data transfer result 0x0
[  176.005580] usb-storage: Attempting to get CSW...
[  176.005581] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  176.005702] usb-storage: Status code 0; transferred 13/13
[  176.005703] usb-storage: -- transfer complete
[  176.005704] usb-storage: Bulk status result = 0
[  176.005706] usb-storage: Bulk Status S 0x53425355 T 0x4d R 0 Stat 0x0
[  176.005708] usb-storage: -- Result from auto-sense is 0
[  176.005709] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  176.005712] usb-storage: Not Ready: Medium not present
[  176.005713] usb-storage: scsi cmd done, result=0x2
[  176.005715] usb-storage: *** thread sleeping.
[  178.003133] usb-storage: queuecommand_lck called
[  178.003141] usb-storage: *** thread awakened.
[  178.003144] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  178.003145] usb-storage:  00 00 00 00 00 00
[  178.003152] usb-storage: Bulk Command S 0x43425355 T 0x4e L 0 F 0 Trg 0 LUN 0 CL 6
[  178.003154] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.003210] usb-storage: Status code 0; transferred 31/31
[  178.003211] usb-storage: -- transfer complete
[  178.003213] usb-storage: Bulk command transfer result=0
[  178.003214] usb-storage: Attempting to get CSW...
[  178.003216] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.003455] usb-storage: Status code 0; transferred 13/13
[  178.003456] usb-storage: -- transfer complete
[  178.003457] usb-storage: Bulk status result = 0
[  178.003459] usb-storage: Bulk Status S 0x53425355 T 0x4e R 0 Stat 0x1
[  178.003461] usb-storage: -- transport indicates command failure
[  178.003462] usb-storage: Issuing auto-REQUEST_SENSE
[  178.003465] usb-storage: Bulk Command S 0x43425355 T 0x4f L 18 F 128 Trg 0 LUN 0 CL 6
[  178.003467] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.003587] usb-storage: Status code 0; transferred 31/31
[  178.003589] usb-storage: -- transfer complete
[  178.003590] usb-storage: Bulk command transfer result=0
[  178.003592] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  178.003705] usb-storage: Status code 0; transferred 18/18
[  178.003707] usb-storage: -- transfer complete
[  178.003708] usb-storage: Bulk data transfer result 0x0
[  178.003709] usb-storage: Attempting to get CSW...
[  178.003710] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.003830] usb-storage: Status code 0; transferred 13/13
[  178.003832] usb-storage: -- transfer complete
[  178.003833] usb-storage: Bulk status result = 0
[  178.003835] usb-storage: Bulk Status S 0x53425355 T 0x4f R 0 Stat 0x0
[  178.003837] usb-storage: -- Result from auto-sense is 0
[  178.003838] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  178.003842] usb-storage: Not Ready: Medium not present
[  178.003845] usb-storage: scsi cmd done, result=0x2
[  178.003846] usb-storage: *** thread sleeping.
[  178.003858] usb-storage: queuecommand_lck called
[  178.003861] usb-storage: *** thread awakened.
[  178.003863] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  178.003864] usb-storage:  00 00 00 00 00 00
[  178.003868] usb-storage: Bulk Command S 0x43425355 T 0x50 L 0 F 0 Trg 0 LUN 0 CL 6
[  178.003870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.003955] usb-storage: Status code 0; transferred 31/31
[  178.003957] usb-storage: -- transfer complete
[  178.003958] usb-storage: Bulk command transfer result=0
[  178.003959] usb-storage: Attempting to get CSW...
[  178.003961] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.004080] usb-storage: Status code 0; transferred 13/13
[  178.004081] usb-storage: -- transfer complete
[  178.004083] usb-storage: Bulk status result = 0
[  178.004084] usb-storage: Bulk Status S 0x53425355 T 0x50 R 0 Stat 0x1
[  178.004086] usb-storage: -- transport indicates command failure
[  178.004087] usb-storage: Issuing auto-REQUEST_SENSE
[  178.004089] usb-storage: Bulk Command S 0x43425355 T 0x51 L 18 F 128 Trg 0 LUN 0 CL 6
[  178.004091] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.004205] usb-storage: Status code 0; transferred 31/31
[  178.004206] usb-storage: -- transfer complete
[  178.004207] usb-storage: Bulk command transfer result=0
[  178.004209] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  178.004330] usb-storage: Status code 0; transferred 18/18
[  178.004331] usb-storage: -- transfer complete
[  178.004332] usb-storage: Bulk data transfer result 0x0
[  178.004333] usb-storage: Attempting to get CSW...
[  178.004334] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.004455] usb-storage: Status code 0; transferred 13/13
[  178.004456] usb-storage: -- transfer complete
[  178.004458] usb-storage: Bulk status result = 0
[  178.004459] usb-storage: Bulk Status S 0x53425355 T 0x51 R 0 Stat 0x0
[  178.004461] usb-storage: -- Result from auto-sense is 0
[  178.004463] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  178.004465] usb-storage: Not Ready: Medium not present
[  178.004466] usb-storage: scsi cmd done, result=0x2
[  178.004468] usb-storage: *** thread sleeping.
[  178.004474] usb-storage: queuecommand_lck called
[  178.004476] usb-storage: *** thread awakened.
[  178.004478] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  178.004479] usb-storage:  1e 00 00 00 01 00
[  178.004483] usb-storage: Bulk Command S 0x43425355 T 0x52 L 0 F 0 Trg 0 LUN 0 CL 6
[  178.004484] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.004580] usb-storage: Status code 0; transferred 31/31
[  178.004581] usb-storage: -- transfer complete
[  178.004583] usb-storage: Bulk command transfer result=0
[  178.004584] usb-storage: Attempting to get CSW...
[  178.004585] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.004704] usb-storage: Status code 0; transferred 13/13
[  178.004705] usb-storage: -- transfer complete
[  178.004707] usb-storage: Bulk status result = 0
[  178.004709] usb-storage: Bulk Status S 0x53425355 T 0x52 R 0 Stat 0x0
[  178.004710] usb-storage: scsi cmd done, result=0x0
[  178.004711] usb-storage: *** thread sleeping.
[  178.004720] usb-storage: queuecommand_lck called
[  178.004724] usb-storage: *** thread awakened.
[  178.004726] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  178.004727] usb-storage:  1e 00 00 00 00 00
[  178.004731] usb-storage: Bulk Command S 0x43425355 T 0x53 L 0 F 0 Trg 0 LUN 0 CL 6
[  178.004733] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.004831] usb-storage: Status code 0; transferred 31/31
[  178.004832] usb-storage: -- transfer complete
[  178.004833] usb-storage: Bulk command transfer result=0
[  178.004834] usb-storage: Attempting to get CSW...
[  178.004836] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.004955] usb-storage: Status code 0; transferred 13/13
[  178.004956] usb-storage: -- transfer complete
[  178.004957] usb-storage: Bulk status result = 0
[  178.004959] usb-storage: Bulk Status S 0x53425355 T 0x53 R 0 Stat 0x0
[  178.004960] usb-storage: scsi cmd done, result=0x0
[  178.004962] usb-storage: *** thread sleeping.
[  178.004965] usb-storage: queuecommand_lck called
[  178.004968] usb-storage: *** thread awakened.
[  178.004969] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  178.004970] usb-storage:  00 00 00 00 00 00
[  178.004974] usb-storage: Bulk Command S 0x43425355 T 0x54 L 0 F 0 Trg 0 LUN 0 CL 6
[  178.004976] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.005080] usb-storage: Status code 0; transferred 31/31
[  178.005081] usb-storage: -- transfer complete
[  178.005083] usb-storage: Bulk command transfer result=0
[  178.005084] usb-storage: Attempting to get CSW...
[  178.005085] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.005205] usb-storage: Status code 0; transferred 13/13
[  178.005206] usb-storage: -- transfer complete
[  178.005207] usb-storage: Bulk status result = 0
[  178.005209] usb-storage: Bulk Status S 0x53425355 T 0x54 R 0 Stat 0x1
[  178.005211] usb-storage: -- transport indicates command failure
[  178.005212] usb-storage: Issuing auto-REQUEST_SENSE
[  178.005214] usb-storage: Bulk Command S 0x43425355 T 0x55 L 18 F 128 Trg 0 LUN 0 CL 6
[  178.005216] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  178.005330] usb-storage: Status code 0; transferred 31/31
[  178.005331] usb-storage: -- transfer complete
[  178.005332] usb-storage: Bulk command transfer result=0
[  178.005334] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  178.005455] usb-storage: Status code 0; transferred 18/18
[  178.005456] usb-storage: -- transfer complete
[  178.005457] usb-storage: Bulk data transfer result 0x0
[  178.005458] usb-storage: Attempting to get CSW...
[  178.005460] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  178.005580] usb-storage: Status code 0; transferred 13/13
[  178.005581] usb-storage: -- transfer complete
[  178.005583] usb-storage: Bulk status result = 0
[  178.005584] usb-storage: Bulk Status S 0x53425355 T 0x55 R 0 Stat 0x0
[  178.005586] usb-storage: -- Result from auto-sense is 0
[  178.005588] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  178.005590] usb-storage: Not Ready: Medium not present
[  178.005591] usb-storage: scsi cmd done, result=0x2
[  178.005593] usb-storage: *** thread sleeping.
[  180.004058] usb-storage: queuecommand_lck called
[  180.004067] usb-storage: *** thread awakened.
[  180.004070] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  180.004071] usb-storage:  00 00 00 00 00 00
[  180.004077] usb-storage: Bulk Command S 0x43425355 T 0x56 L 0 F 0 Trg 0 LUN 0 CL 6
[  180.004079] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.004213] usb-storage: Status code 0; transferred 31/31
[  180.004214] usb-storage: -- transfer complete
[  180.004216] usb-storage: Bulk command transfer result=0
[  180.004217] usb-storage: Attempting to get CSW...
[  180.004219] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.005334] usb-storage: Status code 0; transferred 13/13
[  180.005335] usb-storage: -- transfer complete
[  180.005336] usb-storage: Bulk status result = 0
[  180.005338] usb-storage: Bulk Status S 0x53425355 T 0x56 R 0 Stat 0x1
[  180.005340] usb-storage: -- transport indicates command failure
[  180.005341] usb-storage: Issuing auto-REQUEST_SENSE
[  180.005344] usb-storage: Bulk Command S 0x43425355 T 0x57 L 18 F 128 Trg 0 LUN 0 CL 6
[  180.005346] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.005458] usb-storage: Status code 0; transferred 31/31
[  180.005459] usb-storage: -- transfer complete
[  180.005460] usb-storage: Bulk command transfer result=0
[  180.005462] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  180.005584] usb-storage: Status code 0; transferred 18/18
[  180.005585] usb-storage: -- transfer complete
[  180.005586] usb-storage: Bulk data transfer result 0x0
[  180.005587] usb-storage: Attempting to get CSW...
[  180.005589] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.005708] usb-storage: Status code 0; transferred 13/13
[  180.005710] usb-storage: -- transfer complete
[  180.005711] usb-storage: Bulk status result = 0
[  180.005713] usb-storage: Bulk Status S 0x53425355 T 0x57 R 0 Stat 0x0
[  180.005715] usb-storage: -- Result from auto-sense is 0
[  180.005716] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  180.005720] usb-storage: Not Ready: Medium not present
[  180.005722] usb-storage: scsi cmd done, result=0x2
[  180.005724] usb-storage: *** thread sleeping.
[  180.005736] usb-storage: queuecommand_lck called
[  180.005739] usb-storage: *** thread awakened.
[  180.005741] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  180.005742] usb-storage:  00 00 00 00 00 00
[  180.005746] usb-storage: Bulk Command S 0x43425355 T 0x58 L 0 F 0 Trg 0 LUN 0 CL 6
[  180.005748] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.005834] usb-storage: Status code 0; transferred 31/31
[  180.005835] usb-storage: -- transfer complete
[  180.005836] usb-storage: Bulk command transfer result=0
[  180.005837] usb-storage: Attempting to get CSW...
[  180.005839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.005958] usb-storage: Status code 0; transferred 13/13
[  180.005959] usb-storage: -- transfer complete
[  180.005960] usb-storage: Bulk status result = 0
[  180.005962] usb-storage: Bulk Status S 0x53425355 T 0x58 R 0 Stat 0x1
[  180.005963] usb-storage: -- transport indicates command failure
[  180.005964] usb-storage: Issuing auto-REQUEST_SENSE
[  180.005967] usb-storage: Bulk Command S 0x43425355 T 0x59 L 18 F 128 Trg 0 LUN 0 CL 6
[  180.005968] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.006083] usb-storage: Status code 0; transferred 31/31
[  180.006084] usb-storage: -- transfer complete
[  180.006085] usb-storage: Bulk command transfer result=0
[  180.006087] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  180.006208] usb-storage: Status code 0; transferred 18/18
[  180.006209] usb-storage: -- transfer complete
[  180.006210] usb-storage: Bulk data transfer result 0x0
[  180.006211] usb-storage: Attempting to get CSW...
[  180.006213] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.006333] usb-storage: Status code 0; transferred 13/13
[  180.006334] usb-storage: -- transfer complete
[  180.006335] usb-storage: Bulk status result = 0
[  180.006337] usb-storage: Bulk Status S 0x53425355 T 0x59 R 0 Stat 0x0
[  180.006338] usb-storage: -- Result from auto-sense is 0
[  180.006340] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  180.006342] usb-storage: Not Ready: Medium not present
[  180.006344] usb-storage: scsi cmd done, result=0x2
[  180.006345] usb-storage: *** thread sleeping.
[  180.006351] usb-storage: queuecommand_lck called
[  180.006353] usb-storage: *** thread awakened.
[  180.006355] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  180.006356] usb-storage:  1e 00 00 00 01 00
[  180.006360] usb-storage: Bulk Command S 0x43425355 T 0x5a L 0 F 0 Trg 0 LUN 0 CL 6
[  180.006362] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.006458] usb-storage: Status code 0; transferred 31/31
[  180.006460] usb-storage: -- transfer complete
[  180.006461] usb-storage: Bulk command transfer result=0
[  180.006462] usb-storage: Attempting to get CSW...
[  180.006464] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.006583] usb-storage: Status code 0; transferred 13/13
[  180.006584] usb-storage: -- transfer complete
[  180.006585] usb-storage: Bulk status result = 0
[  180.006587] usb-storage: Bulk Status S 0x53425355 T 0x5a R 0 Stat 0x0
[  180.006589] usb-storage: scsi cmd done, result=0x0
[  180.006590] usb-storage: *** thread sleeping.
[  180.006598] usb-storage: queuecommand_lck called
[  180.006603] usb-storage: *** thread awakened.
[  180.006604] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  180.006605] usb-storage:  1e 00 00 00 00 00
[  180.006609] usb-storage: Bulk Command S 0x43425355 T 0x5b L 0 F 0 Trg 0 LUN 0 CL 6
[  180.006611] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.006708] usb-storage: Status code 0; transferred 31/31
[  180.006709] usb-storage: -- transfer complete
[  180.006710] usb-storage: Bulk command transfer result=0
[  180.006711] usb-storage: Attempting to get CSW...
[  180.006713] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.006833] usb-storage: Status code 0; transferred 13/13
[  180.006834] usb-storage: -- transfer complete
[  180.006835] usb-storage: Bulk status result = 0
[  180.006837] usb-storage: Bulk Status S 0x53425355 T 0x5b R 0 Stat 0x0
[  180.006839] usb-storage: scsi cmd done, result=0x0
[  180.006840] usb-storage: *** thread sleeping.
[  180.006843] usb-storage: queuecommand_lck called
[  180.006846] usb-storage: *** thread awakened.
[  180.006847] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  180.006848] usb-storage:  00 00 00 00 00 00
[  180.006852] usb-storage: Bulk Command S 0x43425355 T 0x5c L 0 F 0 Trg 0 LUN 0 CL 6
[  180.006854] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.006959] usb-storage: Status code 0; transferred 31/31
[  180.006960] usb-storage: -- transfer complete
[  180.006961] usb-storage: Bulk command transfer result=0
[  180.006962] usb-storage: Attempting to get CSW...
[  180.006964] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.007082] usb-storage: Status code 0; transferred 13/13
[  180.007083] usb-storage: -- transfer complete
[  180.007085] usb-storage: Bulk status result = 0
[  180.007086] usb-storage: Bulk Status S 0x53425355 T 0x5c R 0 Stat 0x1
[  180.007088] usb-storage: -- transport indicates command failure
[  180.007089] usb-storage: Issuing auto-REQUEST_SENSE
[  180.007091] usb-storage: Bulk Command S 0x43425355 T 0x5d L 18 F 128 Trg 0 LUN 0 CL 6
[  180.007093] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  180.007208] usb-storage: Status code 0; transferred 31/31
[  180.007209] usb-storage: -- transfer complete
[  180.007210] usb-storage: Bulk command transfer result=0
[  180.007212] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  180.007333] usb-storage: Status code 0; transferred 18/18
[  180.007334] usb-storage: -- transfer complete
[  180.007335] usb-storage: Bulk data transfer result 0x0
[  180.007336] usb-storage: Attempting to get CSW...
[  180.007338] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  180.007457] usb-storage: Status code 0; transferred 13/13
[  180.007458] usb-storage: -- transfer complete
[  180.007460] usb-storage: Bulk status result = 0
[  180.007461] usb-storage: Bulk Status S 0x53425355 T 0x5d R 0 Stat 0x0
[  180.007463] usb-storage: -- Result from auto-sense is 0
[  180.007465] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  180.007467] usb-storage: Not Ready: Medium not present
[  180.007468] usb-storage: scsi cmd done, result=0x2
[  180.007470] usb-storage: *** thread sleeping.
[  182.003956] usb-storage: queuecommand_lck called
[  182.003964] usb-storage: *** thread awakened.
[  182.003966] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  182.003968] usb-storage:  00 00 00 00 00 00
[  182.003974] usb-storage: Bulk Command S 0x43425355 T 0x5e L 0 F 0 Trg 0 LUN 0 CL 6
[  182.003976] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.004091] usb-storage: Status code 0; transferred 31/31
[  182.004092] usb-storage: -- transfer complete
[  182.004094] usb-storage: Bulk command transfer result=0
[  182.004095] usb-storage: Attempting to get CSW...
[  182.004097] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.005212] usb-storage: Status code 0; transferred 13/13
[  182.005213] usb-storage: -- transfer complete
[  182.005214] usb-storage: Bulk status result = 0
[  182.005216] usb-storage: Bulk Status S 0x53425355 T 0x5e R 0 Stat 0x1
[  182.005218] usb-storage: -- transport indicates command failure
[  182.005219] usb-storage: Issuing auto-REQUEST_SENSE
[  182.005222] usb-storage: Bulk Command S 0x43425355 T 0x5f L 18 F 128 Trg 0 LUN 0 CL 6
[  182.005224] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.005336] usb-storage: Status code 0; transferred 31/31
[  182.005338] usb-storage: -- transfer complete
[  182.005339] usb-storage: Bulk command transfer result=0
[  182.005341] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  182.005462] usb-storage: Status code 0; transferred 18/18
[  182.005463] usb-storage: -- transfer complete
[  182.005464] usb-storage: Bulk data transfer result 0x0
[  182.005465] usb-storage: Attempting to get CSW...
[  182.005467] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.005586] usb-storage: Status code 0; transferred 13/13
[  182.005587] usb-storage: -- transfer complete
[  182.005588] usb-storage: Bulk status result = 0
[  182.005590] usb-storage: Bulk Status S 0x53425355 T 0x5f R 0 Stat 0x0
[  182.005592] usb-storage: -- Result from auto-sense is 0
[  182.005594] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  182.005597] usb-storage: Not Ready: Medium not present
[  182.005600] usb-storage: scsi cmd done, result=0x2
[  182.005602] usb-storage: *** thread sleeping.
[  182.005613] usb-storage: queuecommand_lck called
[  182.005617] usb-storage: *** thread awakened.
[  182.005618] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  182.005619] usb-storage:  00 00 00 00 00 00
[  182.005624] usb-storage: Bulk Command S 0x43425355 T 0x60 L 0 F 0 Trg 0 LUN 0 CL 6
[  182.005625] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.005712] usb-storage: Status code 0; transferred 31/31
[  182.005713] usb-storage: -- transfer complete
[  182.005714] usb-storage: Bulk command transfer result=0
[  182.005716] usb-storage: Attempting to get CSW...
[  182.005717] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.005836] usb-storage: Status code 0; transferred 13/13
[  182.005837] usb-storage: -- transfer complete
[  182.005838] usb-storage: Bulk status result = 0
[  182.005840] usb-storage: Bulk Status S 0x53425355 T 0x60 R 0 Stat 0x1
[  182.005841] usb-storage: -- transport indicates command failure
[  182.005843] usb-storage: Issuing auto-REQUEST_SENSE
[  182.005845] usb-storage: Bulk Command S 0x43425355 T 0x61 L 18 F 128 Trg 0 LUN 0 CL 6
[  182.005847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.005961] usb-storage: Status code 0; transferred 31/31
[  182.005962] usb-storage: -- transfer complete
[  182.005963] usb-storage: Bulk command transfer result=0
[  182.005965] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  182.006086] usb-storage: Status code 0; transferred 18/18
[  182.006087] usb-storage: -- transfer complete
[  182.006089] usb-storage: Bulk data transfer result 0x0
[  182.006090] usb-storage: Attempting to get CSW...
[  182.006091] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.006211] usb-storage: Status code 0; transferred 13/13
[  182.006212] usb-storage: -- transfer complete
[  182.006213] usb-storage: Bulk status result = 0
[  182.006215] usb-storage: Bulk Status S 0x53425355 T 0x61 R 0 Stat 0x0
[  182.006217] usb-storage: -- Result from auto-sense is 0
[  182.006219] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  182.006221] usb-storage: Not Ready: Medium not present
[  182.006222] usb-storage: scsi cmd done, result=0x2
[  182.006224] usb-storage: *** thread sleeping.
[  182.006230] usb-storage: queuecommand_lck called
[  182.006232] usb-storage: *** thread awakened.
[  182.006234] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  182.006235] usb-storage:  1e 00 00 00 01 00
[  182.006239] usb-storage: Bulk Command S 0x43425355 T 0x62 L 0 F 0 Trg 0 LUN 0 CL 6
[  182.006241] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.006336] usb-storage: Status code 0; transferred 31/31
[  182.006337] usb-storage: -- transfer complete
[  182.006338] usb-storage: Bulk command transfer result=0
[  182.006339] usb-storage: Attempting to get CSW...
[  182.006341] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.006461] usb-storage: Status code 0; transferred 13/13
[  182.006462] usb-storage: -- transfer complete
[  182.006463] usb-storage: Bulk status result = 0
[  182.006465] usb-storage: Bulk Status S 0x53425355 T 0x62 R 0 Stat 0x0
[  182.006467] usb-storage: scsi cmd done, result=0x0
[  182.006468] usb-storage: *** thread sleeping.
[  182.006477] usb-storage: queuecommand_lck called
[  182.006481] usb-storage: *** thread awakened.
[  182.006483] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  182.006484] usb-storage:  1e 00 00 00 00 00
[  182.006488] usb-storage: Bulk Command S 0x43425355 T 0x63 L 0 F 0 Trg 0 LUN 0 CL 6
[  182.006489] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.006586] usb-storage: Status code 0; transferred 31/31
[  182.006588] usb-storage: -- transfer complete
[  182.006589] usb-storage: Bulk command transfer result=0
[  182.006590] usb-storage: Attempting to get CSW...
[  182.006592] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.006710] usb-storage: Status code 0; transferred 13/13
[  182.006711] usb-storage: -- transfer complete
[  182.006713] usb-storage: Bulk status result = 0
[  182.006715] usb-storage: Bulk Status S 0x53425355 T 0x63 R 0 Stat 0x0
[  182.006716] usb-storage: scsi cmd done, result=0x0
[  182.006718] usb-storage: *** thread sleeping.
[  182.006721] usb-storage: queuecommand_lck called
[  182.006723] usb-storage: *** thread awakened.
[  182.006725] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  182.006726] usb-storage:  00 00 00 00 00 00
[  182.006730] usb-storage: Bulk Command S 0x43425355 T 0x64 L 0 F 0 Trg 0 LUN 0 CL 6
[  182.006731] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.006837] usb-storage: Status code 0; transferred 31/31
[  182.006838] usb-storage: -- transfer complete
[  182.006839] usb-storage: Bulk command transfer result=0
[  182.006840] usb-storage: Attempting to get CSW...
[  182.006842] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.006961] usb-storage: Status code 0; transferred 13/13
[  182.006962] usb-storage: -- transfer complete
[  182.006963] usb-storage: Bulk status result = 0
[  182.006965] usb-storage: Bulk Status S 0x53425355 T 0x64 R 0 Stat 0x1
[  182.006966] usb-storage: -- transport indicates command failure
[  182.006968] usb-storage: Issuing auto-REQUEST_SENSE
[  182.006970] usb-storage: Bulk Command S 0x43425355 T 0x65 L 18 F 128 Trg 0 LUN 0 CL 6
[  182.006972] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  182.007085] usb-storage: Status code 0; transferred 31/31
[  182.007087] usb-storage: -- transfer complete
[  182.007088] usb-storage: Bulk command transfer result=0
[  182.007090] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  182.007211] usb-storage: Status code 0; transferred 18/18
[  182.007213] usb-storage: -- transfer complete
[  182.007214] usb-storage: Bulk data transfer result 0x0
[  182.007215] usb-storage: Attempting to get CSW...
[  182.007216] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  182.007336] usb-storage: Status code 0; transferred 13/13
[  182.007337] usb-storage: -- transfer complete
[  182.007338] usb-storage: Bulk status result = 0
[  182.007340] usb-storage: Bulk Status S 0x53425355 T 0x65 R 0 Stat 0x0
[  182.007342] usb-storage: -- Result from auto-sense is 0
[  182.007343] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  182.007346] usb-storage: Not Ready: Medium not present
[  182.007347] usb-storage: scsi cmd done, result=0x2
[  182.007349] usb-storage: *** thread sleeping.
[  184.002490] usb-storage: queuecommand_lck called
[  184.002498] usb-storage: *** thread awakened.
[  184.002500] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  184.002502] usb-storage:  00 00 00 00 00 00
[  184.002508] usb-storage: Bulk Command S 0x43425355 T 0x66 L 0 F 0 Trg 0 LUN 0 CL 6
[  184.002510] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.002594] usb-storage: Status code 0; transferred 31/31
[  184.002596] usb-storage: -- transfer complete
[  184.002597] usb-storage: Bulk command transfer result=0
[  184.002598] usb-storage: Attempting to get CSW...
[  184.002600] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.003090] usb-storage: Status code 0; transferred 13/13
[  184.003091] usb-storage: -- transfer complete
[  184.003093] usb-storage: Bulk status result = 0
[  184.003095] usb-storage: Bulk Status S 0x53425355 T 0x66 R 0 Stat 0x1
[  184.003096] usb-storage: -- transport indicates command failure
[  184.003098] usb-storage: Issuing auto-REQUEST_SENSE
[  184.003101] usb-storage: Bulk Command S 0x43425355 T 0x67 L 18 F 128 Trg 0 LUN 0 CL 6
[  184.003102] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.003215] usb-storage: Status code 0; transferred 31/31
[  184.003216] usb-storage: -- transfer complete
[  184.003218] usb-storage: Bulk command transfer result=0
[  184.003220] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  184.003341] usb-storage: Status code 0; transferred 18/18
[  184.003342] usb-storage: -- transfer complete
[  184.003343] usb-storage: Bulk data transfer result 0x0
[  184.003344] usb-storage: Attempting to get CSW...
[  184.003346] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.003464] usb-storage: Status code 0; transferred 13/13
[  184.003465] usb-storage: -- transfer complete
[  184.003467] usb-storage: Bulk status result = 0
[  184.003469] usb-storage: Bulk Status S 0x53425355 T 0x67 R 0 Stat 0x0
[  184.003471] usb-storage: -- Result from auto-sense is 0
[  184.003472] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  184.003476] usb-storage: Not Ready: Medium not present
[  184.003479] usb-storage: scsi cmd done, result=0x2
[  184.003480] usb-storage: *** thread sleeping.
[  184.003492] usb-storage: queuecommand_lck called
[  184.003496] usb-storage: *** thread awakened.
[  184.003497] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  184.003498] usb-storage:  00 00 00 00 00 00
[  184.003503] usb-storage: Bulk Command S 0x43425355 T 0x68 L 0 F 0 Trg 0 LUN 0 CL 6
[  184.003504] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.003591] usb-storage: Status code 0; transferred 31/31
[  184.003592] usb-storage: -- transfer complete
[  184.003593] usb-storage: Bulk command transfer result=0
[  184.003594] usb-storage: Attempting to get CSW...
[  184.003596] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.003715] usb-storage: Status code 0; transferred 13/13
[  184.003716] usb-storage: -- transfer complete
[  184.003717] usb-storage: Bulk status result = 0
[  184.003719] usb-storage: Bulk Status S 0x53425355 T 0x68 R 0 Stat 0x1
[  184.003720] usb-storage: -- transport indicates command failure
[  184.003721] usb-storage: Issuing auto-REQUEST_SENSE
[  184.003724] usb-storage: Bulk Command S 0x43425355 T 0x69 L 18 F 128 Trg 0 LUN 0 CL 6
[  184.003725] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.003839] usb-storage: Status code 0; transferred 31/31
[  184.003840] usb-storage: -- transfer complete
[  184.003842] usb-storage: Bulk command transfer result=0
[  184.003843] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  184.003965] usb-storage: Status code 0; transferred 18/18
[  184.003966] usb-storage: -- transfer complete
[  184.003967] usb-storage: Bulk data transfer result 0x0
[  184.003968] usb-storage: Attempting to get CSW...
[  184.003970] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.004090] usb-storage: Status code 0; transferred 13/13
[  184.004091] usb-storage: -- transfer complete
[  184.004092] usb-storage: Bulk status result = 0
[  184.004094] usb-storage: Bulk Status S 0x53425355 T 0x69 R 0 Stat 0x0
[  184.004096] usb-storage: -- Result from auto-sense is 0
[  184.004097] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  184.004100] usb-storage: Not Ready: Medium not present
[  184.004101] usb-storage: scsi cmd done, result=0x2
[  184.004103] usb-storage: *** thread sleeping.
[  184.004109] usb-storage: queuecommand_lck called
[  184.004111] usb-storage: *** thread awakened.
[  184.004113] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  184.004114] usb-storage:  1e 00 00 00 01 00
[  184.004118] usb-storage: Bulk Command S 0x43425355 T 0x6a L 0 F 0 Trg 0 LUN 0 CL 6
[  184.004119] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.004215] usb-storage: Status code 0; transferred 31/31
[  184.004216] usb-storage: -- transfer complete
[  184.004217] usb-storage: Bulk command transfer result=0
[  184.004218] usb-storage: Attempting to get CSW...
[  184.004220] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.004340] usb-storage: Status code 0; transferred 13/13
[  184.004341] usb-storage: -- transfer complete
[  184.004342] usb-storage: Bulk status result = 0
[  184.004344] usb-storage: Bulk Status S 0x53425355 T 0x6a R 0 Stat 0x0
[  184.004346] usb-storage: scsi cmd done, result=0x0
[  184.004347] usb-storage: *** thread sleeping.
[  184.004355] usb-storage: queuecommand_lck called
[  184.004360] usb-storage: *** thread awakened.
[  184.004361] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  184.004363] usb-storage:  1e 00 00 00 00 00
[  184.004367] usb-storage: Bulk Command S 0x43425355 T 0x6b L 0 F 0 Trg 0 LUN 0 CL 6
[  184.004368] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.004465] usb-storage: Status code 0; transferred 31/31
[  184.004466] usb-storage: -- transfer complete
[  184.004468] usb-storage: Bulk command transfer result=0
[  184.004469] usb-storage: Attempting to get CSW...
[  184.004470] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.004589] usb-storage: Status code 0; transferred 13/13
[  184.004590] usb-storage: -- transfer complete
[  184.004591] usb-storage: Bulk status result = 0
[  184.004593] usb-storage: Bulk Status S 0x53425355 T 0x6b R 0 Stat 0x0
[  184.004595] usb-storage: scsi cmd done, result=0x0
[  184.004596] usb-storage: *** thread sleeping.
[  184.004600] usb-storage: queuecommand_lck called
[  184.004602] usb-storage: *** thread awakened.
[  184.004604] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  184.004605] usb-storage:  00 00 00 00 00 00
[  184.004609] usb-storage: Bulk Command S 0x43425355 T 0x6c L 0 F 0 Trg 0 LUN 0 CL 6
[  184.004610] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.004716] usb-storage: Status code 0; transferred 31/31
[  184.004717] usb-storage: -- transfer complete
[  184.004718] usb-storage: Bulk command transfer result=0
[  184.004719] usb-storage: Attempting to get CSW...
[  184.004721] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.004839] usb-storage: Status code 0; transferred 13/13
[  184.004841] usb-storage: -- transfer complete
[  184.004842] usb-storage: Bulk status result = 0
[  184.004844] usb-storage: Bulk Status S 0x53425355 T 0x6c R 0 Stat 0x1
[  184.004845] usb-storage: -- transport indicates command failure
[  184.004846] usb-storage: Issuing auto-REQUEST_SENSE
[  184.004849] usb-storage: Bulk Command S 0x43425355 T 0x6d L 18 F 128 Trg 0 LUN 0 CL 6
[  184.004850] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  184.004964] usb-storage: Status code 0; transferred 31/31
[  184.004965] usb-storage: -- transfer complete
[  184.004967] usb-storage: Bulk command transfer result=0
[  184.004968] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  184.005090] usb-storage: Status code 0; transferred 18/18
[  184.005091] usb-storage: -- transfer complete
[  184.005092] usb-storage: Bulk data transfer result 0x0
[  184.005093] usb-storage: Attempting to get CSW...
[  184.005095] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  184.005215] usb-storage: Status code 0; transferred 13/13
[  184.005216] usb-storage: -- transfer complete
[  184.005217] usb-storage: Bulk status result = 0
[  184.005219] usb-storage: Bulk Status S 0x53425355 T 0x6d R 0 Stat 0x0
[  184.005221] usb-storage: -- Result from auto-sense is 0
[  184.005222] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  184.005224] usb-storage: Not Ready: Medium not present
[  184.005226] usb-storage: scsi cmd done, result=0x2
[  184.005228] usb-storage: *** thread sleeping.
[  186.003641] usb-storage: queuecommand_lck called
[  186.003649] usb-storage: *** thread awakened.
[  186.003652] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  186.003653] usb-storage:  00 00 00 00 00 00
[  186.003660] usb-storage: Bulk Command S 0x43425355 T 0x6e L 0 F 0 Trg 0 LUN 0 CL 6
[  186.003662] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.003724] usb-storage: Status code 0; transferred 31/31
[  186.003725] usb-storage: -- transfer complete
[  186.003726] usb-storage: Bulk command transfer result=0
[  186.003728] usb-storage: Attempting to get CSW...
[  186.003729] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.003968] usb-storage: Status code 0; transferred 13/13
[  186.003970] usb-storage: -- transfer complete
[  186.003971] usb-storage: Bulk status result = 0
[  186.003973] usb-storage: Bulk Status S 0x53425355 T 0x6e R 0 Stat 0x1
[  186.003975] usb-storage: -- transport indicates command failure
[  186.003976] usb-storage: Issuing auto-REQUEST_SENSE
[  186.003979] usb-storage: Bulk Command S 0x43425355 T 0x6f L 18 F 128 Trg 0 LUN 0 CL 6
[  186.003981] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.004097] usb-storage: Status code 0; transferred 31/31
[  186.004098] usb-storage: -- transfer complete
[  186.004100] usb-storage: Bulk command transfer result=0
[  186.004102] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  186.004219] usb-storage: Status code 0; transferred 18/18
[  186.004220] usb-storage: -- transfer complete
[  186.004239] usb-storage: Bulk data transfer result 0x0
[  186.004240] usb-storage: Attempting to get CSW...
[  186.004241] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.004343] usb-storage: Status code 0; transferred 13/13
[  186.004345] usb-storage: -- transfer complete
[  186.004346] usb-storage: Bulk status result = 0
[  186.004348] usb-storage: Bulk Status S 0x53425355 T 0x6f R 0 Stat 0x0
[  186.004350] usb-storage: -- Result from auto-sense is 0
[  186.004352] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  186.004355] usb-storage: Not Ready: Medium not present
[  186.004358] usb-storage: scsi cmd done, result=0x2
[  186.004359] usb-storage: *** thread sleeping.
[  186.004371] usb-storage: queuecommand_lck called
[  186.004375] usb-storage: *** thread awakened.
[  186.004376] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  186.004377] usb-storage:  00 00 00 00 00 00
[  186.004382] usb-storage: Bulk Command S 0x43425355 T 0x70 L 0 F 0 Trg 0 LUN 0 CL 6
[  186.004383] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.004469] usb-storage: Status code 0; transferred 31/31
[  186.004470] usb-storage: -- transfer complete
[  186.004471] usb-storage: Bulk command transfer result=0
[  186.004472] usb-storage: Attempting to get CSW...
[  186.004474] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.004593] usb-storage: Status code 0; transferred 13/13
[  186.004594] usb-storage: -- transfer complete
[  186.004596] usb-storage: Bulk status result = 0
[  186.004598] usb-storage: Bulk Status S 0x53425355 T 0x70 R 0 Stat 0x1
[  186.004599] usb-storage: -- transport indicates command failure
[  186.004600] usb-storage: Issuing auto-REQUEST_SENSE
[  186.004602] usb-storage: Bulk Command S 0x43425355 T 0x71 L 18 F 128 Trg 0 LUN 0 CL 6
[  186.004604] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.004718] usb-storage: Status code 0; transferred 31/31
[  186.004719] usb-storage: -- transfer complete
[  186.004720] usb-storage: Bulk command transfer result=0
[  186.004722] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  186.004843] usb-storage: Status code 0; transferred 18/18
[  186.004844] usb-storage: -- transfer complete
[  186.004845] usb-storage: Bulk data transfer result 0x0
[  186.004846] usb-storage: Attempting to get CSW...
[  186.004848] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.004968] usb-storage: Status code 0; transferred 13/13
[  186.004969] usb-storage: -- transfer complete
[  186.004971] usb-storage: Bulk status result = 0
[  186.004972] usb-storage: Bulk Status S 0x53425355 T 0x71 R 0 Stat 0x0
[  186.004974] usb-storage: -- Result from auto-sense is 0
[  186.004976] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  186.004978] usb-storage: Not Ready: Medium not present
[  186.004979] usb-storage: scsi cmd done, result=0x2
[  186.004981] usb-storage: *** thread sleeping.
[  186.004987] usb-storage: queuecommand_lck called
[  186.004989] usb-storage: *** thread awakened.
[  186.004991] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  186.004992] usb-storage:  1e 00 00 00 01 00
[  186.004996] usb-storage: Bulk Command S 0x43425355 T 0x72 L 0 F 0 Trg 0 LUN 0 CL 6
[  186.004998] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.005093] usb-storage: Status code 0; transferred 31/31
[  186.005094] usb-storage: -- transfer complete
[  186.005096] usb-storage: Bulk command transfer result=0
[  186.005097] usb-storage: Attempting to get CSW...
[  186.005098] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.005217] usb-storage: Status code 0; transferred 13/13
[  186.005218] usb-storage: -- transfer complete
[  186.005220] usb-storage: Bulk status result = 0
[  186.005222] usb-storage: Bulk Status S 0x53425355 T 0x72 R 0 Stat 0x0
[  186.005223] usb-storage: scsi cmd done, result=0x0
[  186.005224] usb-storage: *** thread sleeping.
[  186.005233] usb-storage: queuecommand_lck called
[  186.005237] usb-storage: *** thread awakened.
[  186.005239] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  186.005240] usb-storage:  1e 00 00 00 00 00
[  186.005244] usb-storage: Bulk Command S 0x43425355 T 0x73 L 0 F 0 Trg 0 LUN 0 CL 6
[  186.005246] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.005344] usb-storage: Status code 0; transferred 31/31
[  186.005345] usb-storage: -- transfer complete
[  186.005346] usb-storage: Bulk command transfer result=0
[  186.005347] usb-storage: Attempting to get CSW...
[  186.005349] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.005468] usb-storage: Status code 0; transferred 13/13
[  186.005469] usb-storage: -- transfer complete
[  186.005470] usb-storage: Bulk status result = 0
[  186.005472] usb-storage: Bulk Status S 0x53425355 T 0x73 R 0 Stat 0x0
[  186.005473] usb-storage: scsi cmd done, result=0x0
[  186.005475] usb-storage: *** thread sleeping.
[  186.005479] usb-storage: queuecommand_lck called
[  186.005481] usb-storage: *** thread awakened.
[  186.005482] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  186.005483] usb-storage:  00 00 00 00 00 00
[  186.005488] usb-storage: Bulk Command S 0x43425355 T 0x74 L 0 F 0 Trg 0 LUN 0 CL 6
[  186.005489] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.005593] usb-storage: Status code 0; transferred 31/31
[  186.005594] usb-storage: -- transfer complete
[  186.005595] usb-storage: Bulk command transfer result=0
[  186.005597] usb-storage: Attempting to get CSW...
[  186.005598] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.005718] usb-storage: Status code 0; transferred 13/13
[  186.005719] usb-storage: -- transfer complete
[  186.005720] usb-storage: Bulk status result = 0
[  186.005722] usb-storage: Bulk Status S 0x53425355 T 0x74 R 0 Stat 0x1
[  186.005724] usb-storage: -- transport indicates command failure
[  186.005725] usb-storage: Issuing auto-REQUEST_SENSE
[  186.005727] usb-storage: Bulk Command S 0x43425355 T 0x75 L 18 F 128 Trg 0 LUN 0 CL 6
[  186.005729] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  186.005842] usb-storage: Status code 0; transferred 31/31
[  186.005844] usb-storage: -- transfer complete
[  186.005845] usb-storage: Bulk command transfer result=0
[  186.005847] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  186.005968] usb-storage: Status code 0; transferred 18/18
[  186.005969] usb-storage: -- transfer complete
[  186.005970] usb-storage: Bulk data transfer result 0x0
[  186.005972] usb-storage: Attempting to get CSW...
[  186.005973] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  186.006093] usb-storage: Status code 0; transferred 13/13
[  186.006094] usb-storage: -- transfer complete
[  186.006096] usb-storage: Bulk status result = 0
[  186.006098] usb-storage: Bulk Status S 0x53425355 T 0x75 R 0 Stat 0x0
[  186.006099] usb-storage: -- Result from auto-sense is 0
[  186.006101] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  186.006103] usb-storage: Not Ready: Medium not present
[  186.006105] usb-storage: scsi cmd done, result=0x2
[  186.006106] usb-storage: *** thread sleeping.
[  188.003563] usb-storage: queuecommand_lck called
[  188.003571] usb-storage: *** thread awakened.
[  188.003574] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  188.003576] usb-storage:  00 00 00 00 00 00
[  188.003582] usb-storage: Bulk Command S 0x43425355 T 0x76 L 0 F 0 Trg 0 LUN 0 CL 6
[  188.003584] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.003726] usb-storage: Status code 0; transferred 31/31
[  188.003728] usb-storage: -- transfer complete
[  188.003729] usb-storage: Bulk command transfer result=0
[  188.003731] usb-storage: Attempting to get CSW...
[  188.003732] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.004847] usb-storage: Status code 0; transferred 13/13
[  188.004848] usb-storage: -- transfer complete
[  188.004850] usb-storage: Bulk status result = 0
[  188.004852] usb-storage: Bulk Status S 0x53425355 T 0x76 R 0 Stat 0x1
[  188.004853] usb-storage: -- transport indicates command failure
[  188.004855] usb-storage: Issuing auto-REQUEST_SENSE
[  188.004858] usb-storage: Bulk Command S 0x43425355 T 0x77 L 18 F 128 Trg 0 LUN 0 CL 6
[  188.004859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.004971] usb-storage: Status code 0; transferred 31/31
[  188.004972] usb-storage: -- transfer complete
[  188.004974] usb-storage: Bulk command transfer result=0
[  188.004976] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  188.005097] usb-storage: Status code 0; transferred 18/18
[  188.005098] usb-storage: -- transfer complete
[  188.005099] usb-storage: Bulk data transfer result 0x0
[  188.005100] usb-storage: Attempting to get CSW...
[  188.005102] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.005222] usb-storage: Status code 0; transferred 13/13
[  188.005223] usb-storage: -- transfer complete
[  188.005224] usb-storage: Bulk status result = 0
[  188.005226] usb-storage: Bulk Status S 0x53425355 T 0x77 R 0 Stat 0x0
[  188.005228] usb-storage: -- Result from auto-sense is 0
[  188.005230] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  188.005233] usb-storage: Not Ready: Medium not present
[  188.005236] usb-storage: scsi cmd done, result=0x2
[  188.005237] usb-storage: *** thread sleeping.
[  188.005249] usb-storage: queuecommand_lck called
[  188.005253] usb-storage: *** thread awakened.
[  188.005254] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  188.005255] usb-storage:  00 00 00 00 00 00
[  188.005260] usb-storage: Bulk Command S 0x43425355 T 0x78 L 0 F 0 Trg 0 LUN 0 CL 6
[  188.005261] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.005347] usb-storage: Status code 0; transferred 31/31
[  188.005348] usb-storage: -- transfer complete
[  188.005349] usb-storage: Bulk command transfer result=0
[  188.005351] usb-storage: Attempting to get CSW...
[  188.005352] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.005471] usb-storage: Status code 0; transferred 13/13
[  188.005472] usb-storage: -- transfer complete
[  188.005473] usb-storage: Bulk status result = 0
[  188.005475] usb-storage: Bulk Status S 0x53425355 T 0x78 R 0 Stat 0x1
[  188.005476] usb-storage: -- transport indicates command failure
[  188.005478] usb-storage: Issuing auto-REQUEST_SENSE
[  188.005480] usb-storage: Bulk Command S 0x43425355 T 0x79 L 18 F 128 Trg 0 LUN 0 CL 6
[  188.005482] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.005596] usb-storage: Status code 0; transferred 31/31
[  188.005598] usb-storage: -- transfer complete
[  188.005599] usb-storage: Bulk command transfer result=0
[  188.005601] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  188.005721] usb-storage: Status code 0; transferred 18/18
[  188.005722] usb-storage: -- transfer complete
[  188.005723] usb-storage: Bulk data transfer result 0x0
[  188.005725] usb-storage: Attempting to get CSW...
[  188.005726] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.005846] usb-storage: Status code 0; transferred 13/13
[  188.005847] usb-storage: -- transfer complete
[  188.005848] usb-storage: Bulk status result = 0
[  188.005850] usb-storage: Bulk Status S 0x53425355 T 0x79 R 0 Stat 0x0
[  188.005852] usb-storage: -- Result from auto-sense is 0
[  188.005854] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  188.005856] usb-storage: Not Ready: Medium not present
[  188.005857] usb-storage: scsi cmd done, result=0x2
[  188.005859] usb-storage: *** thread sleeping.
[  188.005865] usb-storage: queuecommand_lck called
[  188.005867] usb-storage: *** thread awakened.
[  188.005869] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  188.005870] usb-storage:  1e 00 00 00 01 00
[  188.005874] usb-storage: Bulk Command S 0x43425355 T 0x7a L 0 F 0 Trg 0 LUN 0 CL 6
[  188.005875] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.005972] usb-storage: Status code 0; transferred 31/31
[  188.005973] usb-storage: -- transfer complete
[  188.005974] usb-storage: Bulk command transfer result=0
[  188.005975] usb-storage: Attempting to get CSW...
[  188.005977] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.006096] usb-storage: Status code 0; transferred 13/13
[  188.006097] usb-storage: -- transfer complete
[  188.006099] usb-storage: Bulk status result = 0
[  188.006100] usb-storage: Bulk Status S 0x53425355 T 0x7a R 0 Stat 0x0
[  188.006102] usb-storage: scsi cmd done, result=0x0
[  188.006103] usb-storage: *** thread sleeping.
[  188.006112] usb-storage: queuecommand_lck called
[  188.006116] usb-storage: *** thread awakened.
[  188.006118] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  188.006119] usb-storage:  1e 00 00 00 00 00
[  188.006123] usb-storage: Bulk Command S 0x43425355 T 0x7b L 0 F 0 Trg 0 LUN 0 CL 6
[  188.006124] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.006222] usb-storage: Status code 0; transferred 31/31
[  188.006224] usb-storage: -- transfer complete
[  188.006225] usb-storage: Bulk command transfer result=0
[  188.006226] usb-storage: Attempting to get CSW...
[  188.006228] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.006348] usb-storage: Status code 0; transferred 13/13
[  188.006350] usb-storage: -- transfer complete
[  188.006351] usb-storage: Bulk status result = 0
[  188.006353] usb-storage: Bulk Status S 0x53425355 T 0x7b R 0 Stat 0x0
[  188.006354] usb-storage: scsi cmd done, result=0x0
[  188.006356] usb-storage: *** thread sleeping.
[  188.006361] usb-storage: queuecommand_lck called
[  188.006364] usb-storage: *** thread awakened.
[  188.006365] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  188.006366] usb-storage:  00 00 00 00 00 00
[  188.006371] usb-storage: Bulk Command S 0x43425355 T 0x7c L 0 F 0 Trg 0 LUN 0 CL 6
[  188.006372] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.006473] usb-storage: Status code 0; transferred 31/31
[  188.006475] usb-storage: -- transfer complete
[  188.006476] usb-storage: Bulk command transfer result=0
[  188.006477] usb-storage: Attempting to get CSW...
[  188.006479] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.006608] usb-storage: Status code 0; transferred 13/13
[  188.006609] usb-storage: -- transfer complete
[  188.006610] usb-storage: Bulk status result = 0
[  188.006612] usb-storage: Bulk Status S 0x53425355 T 0x7c R 0 Stat 0x1
[  188.006614] usb-storage: -- transport indicates command failure
[  188.006615] usb-storage: Issuing auto-REQUEST_SENSE
[  188.006618] usb-storage: Bulk Command S 0x43425355 T 0x7d L 18 F 128 Trg 0 LUN 0 CL 6
[  188.006620] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  188.006723] usb-storage: Status code 0; transferred 31/31
[  188.006725] usb-storage: -- transfer complete
[  188.006726] usb-storage: Bulk command transfer result=0
[  188.006728] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  188.006851] usb-storage: Status code 0; transferred 18/18
[  188.006852] usb-storage: -- transfer complete
[  188.006853] usb-storage: Bulk data transfer result 0x0
[  188.006854] usb-storage: Attempting to get CSW...
[  188.006856] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  188.006971] usb-storage: Status code 0; transferred 13/13
[  188.006972] usb-storage: -- transfer complete
[  188.006973] usb-storage: Bulk status result = 0
[  188.006975] usb-storage: Bulk Status S 0x53425355 T 0x7d R 0 Stat 0x0
[  188.006977] usb-storage: -- Result from auto-sense is 0
[  188.006979] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  188.006983] usb-storage: Not Ready: Medium not present
[  188.006985] usb-storage: scsi cmd done, result=0x2
[  188.006987] usb-storage: *** thread sleeping.
[  190.003397] usb-storage: queuecommand_lck called
[  190.003405] usb-storage: *** thread awakened.
[  190.003407] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  190.003409] usb-storage:  00 00 00 00 00 00
[  190.003415] usb-storage: Bulk Command S 0x43425355 T 0x7e L 0 F 0 Trg 0 LUN 0 CL 6
[  190.003417] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.003479] usb-storage: Status code 0; transferred 31/31
[  190.003481] usb-storage: -- transfer complete
[  190.003482] usb-storage: Bulk command transfer result=0
[  190.003484] usb-storage: Attempting to get CSW...
[  190.003485] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.003725] usb-storage: Status code 0; transferred 13/13
[  190.003727] usb-storage: -- transfer complete
[  190.003728] usb-storage: Bulk status result = 0
[  190.003730] usb-storage: Bulk Status S 0x53425355 T 0x7e R 0 Stat 0x1
[  190.003732] usb-storage: -- transport indicates command failure
[  190.003733] usb-storage: Issuing auto-REQUEST_SENSE
[  190.003736] usb-storage: Bulk Command S 0x43425355 T 0x7f L 18 F 128 Trg 0 LUN 0 CL 6
[  190.003738] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.003854] usb-storage: Status code 0; transferred 31/31
[  190.003855] usb-storage: -- transfer complete
[  190.003856] usb-storage: Bulk command transfer result=0
[  190.003858] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  190.003975] usb-storage: Status code 0; transferred 18/18
[  190.003976] usb-storage: -- transfer complete
[  190.003995] usb-storage: Bulk data transfer result 0x0
[  190.003996] usb-storage: Attempting to get CSW...
[  190.003998] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.004100] usb-storage: Status code 0; transferred 13/13
[  190.004101] usb-storage: -- transfer complete
[  190.004102] usb-storage: Bulk status result = 0
[  190.004104] usb-storage: Bulk Status S 0x53425355 T 0x7f R 0 Stat 0x0
[  190.004106] usb-storage: -- Result from auto-sense is 0
[  190.004108] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  190.004112] usb-storage: Not Ready: Medium not present
[  190.004114] usb-storage: scsi cmd done, result=0x2
[  190.004116] usb-storage: *** thread sleeping.
[  190.004127] usb-storage: queuecommand_lck called
[  190.004131] usb-storage: *** thread awakened.
[  190.004132] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  190.004133] usb-storage:  00 00 00 00 00 00
[  190.004138] usb-storage: Bulk Command S 0x43425355 T 0x80 L 0 F 0 Trg 0 LUN 0 CL 6
[  190.004139] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.004226] usb-storage: Status code 0; transferred 31/31
[  190.004227] usb-storage: -- transfer complete
[  190.004228] usb-storage: Bulk command transfer result=0
[  190.004229] usb-storage: Attempting to get CSW...
[  190.004231] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.004350] usb-storage: Status code 0; transferred 13/13
[  190.004351] usb-storage: -- transfer complete
[  190.004352] usb-storage: Bulk status result = 0
[  190.004354] usb-storage: Bulk Status S 0x53425355 T 0x80 R 0 Stat 0x1
[  190.004355] usb-storage: -- transport indicates command failure
[  190.004356] usb-storage: Issuing auto-REQUEST_SENSE
[  190.004359] usb-storage: Bulk Command S 0x43425355 T 0x81 L 18 F 128 Trg 0 LUN 0 CL 6
[  190.004360] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.004475] usb-storage: Status code 0; transferred 31/31
[  190.004476] usb-storage: -- transfer complete
[  190.004477] usb-storage: Bulk command transfer result=0
[  190.004479] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  190.004600] usb-storage: Status code 0; transferred 18/18
[  190.004601] usb-storage: -- transfer complete
[  190.004602] usb-storage: Bulk data transfer result 0x0
[  190.004603] usb-storage: Attempting to get CSW...
[  190.004605] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.004724] usb-storage: Status code 0; transferred 13/13
[  190.004726] usb-storage: -- transfer complete
[  190.004727] usb-storage: Bulk status result = 0
[  190.004729] usb-storage: Bulk Status S 0x53425355 T 0x81 R 0 Stat 0x0
[  190.004730] usb-storage: -- Result from auto-sense is 0
[  190.004732] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  190.004734] usb-storage: Not Ready: Medium not present
[  190.004736] usb-storage: scsi cmd done, result=0x2
[  190.004737] usb-storage: *** thread sleeping.
[  190.004743] usb-storage: queuecommand_lck called
[  190.004745] usb-storage: *** thread awakened.
[  190.004747] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  190.004748] usb-storage:  1e 00 00 00 01 00
[  190.004752] usb-storage: Bulk Command S 0x43425355 T 0x82 L 0 F 0 Trg 0 LUN 0 CL 6
[  190.004754] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.004850] usb-storage: Status code 0; transferred 31/31
[  190.004851] usb-storage: -- transfer complete
[  190.004852] usb-storage: Bulk command transfer result=0
[  190.004853] usb-storage: Attempting to get CSW...
[  190.004855] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.004975] usb-storage: Status code 0; transferred 13/13
[  190.004976] usb-storage: -- transfer complete
[  190.004977] usb-storage: Bulk status result = 0
[  190.004979] usb-storage: Bulk Status S 0x53425355 T 0x82 R 0 Stat 0x0
[  190.004981] usb-storage: scsi cmd done, result=0x0
[  190.004982] usb-storage: *** thread sleeping.
[  190.004991] usb-storage: queuecommand_lck called
[  190.004995] usb-storage: *** thread awakened.
[  190.004996] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  190.004997] usb-storage:  1e 00 00 00 00 00
[  190.005002] usb-storage: Bulk Command S 0x43425355 T 0x83 L 0 F 0 Trg 0 LUN 0 CL 6
[  190.005003] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.005100] usb-storage: Status code 0; transferred 31/31
[  190.005102] usb-storage: -- transfer complete
[  190.005103] usb-storage: Bulk command transfer result=0
[  190.005104] usb-storage: Attempting to get CSW...
[  190.005106] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.005224] usb-storage: Status code 0; transferred 13/13
[  190.005226] usb-storage: -- transfer complete
[  190.005227] usb-storage: Bulk status result = 0
[  190.005229] usb-storage: Bulk Status S 0x53425355 T 0x83 R 0 Stat 0x0
[  190.005230] usb-storage: scsi cmd done, result=0x0
[  190.005232] usb-storage: *** thread sleeping.
[  190.005235] usb-storage: queuecommand_lck called
[  190.005237] usb-storage: *** thread awakened.
[  190.005239] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  190.005240] usb-storage:  00 00 00 00 00 00
[  190.005244] usb-storage: Bulk Command S 0x43425355 T 0x84 L 0 F 0 Trg 0 LUN 0 CL 6
[  190.005246] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.005350] usb-storage: Status code 0; transferred 31/31
[  190.005352] usb-storage: -- transfer complete
[  190.005353] usb-storage: Bulk command transfer result=0
[  190.005354] usb-storage: Attempting to get CSW...
[  190.005356] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.005475] usb-storage: Status code 0; transferred 13/13
[  190.005476] usb-storage: -- transfer complete
[  190.005477] usb-storage: Bulk status result = 0
[  190.005479] usb-storage: Bulk Status S 0x53425355 T 0x84 R 0 Stat 0x1
[  190.005480] usb-storage: -- transport indicates command failure
[  190.005481] usb-storage: Issuing auto-REQUEST_SENSE
[  190.005484] usb-storage: Bulk Command S 0x43425355 T 0x85 L 18 F 128 Trg 0 LUN 0 CL 6
[  190.005486] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  190.005599] usb-storage: Status code 0; transferred 31/31
[  190.005600] usb-storage: -- transfer complete
[  190.005601] usb-storage: Bulk command transfer result=0
[  190.005603] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  190.005725] usb-storage: Status code 0; transferred 18/18
[  190.005726] usb-storage: -- transfer complete
[  190.005727] usb-storage: Bulk data transfer result 0x0
[  190.005728] usb-storage: Attempting to get CSW...
[  190.005730] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  190.005850] usb-storage: Status code 0; transferred 13/13
[  190.005852] usb-storage: -- transfer complete
[  190.005853] usb-storage: Bulk status result = 0
[  190.005855] usb-storage: Bulk Status S 0x53425355 T 0x85 R 0 Stat 0x0
[  190.005856] usb-storage: -- Result from auto-sense is 0
[  190.005858] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  190.005860] usb-storage: Not Ready: Medium not present
[  190.005862] usb-storage: scsi cmd done, result=0x2
[  190.005863] usb-storage: *** thread sleeping.
[  192.003315] usb-storage: queuecommand_lck called
[  192.003323] usb-storage: *** thread awakened.
[  192.003326] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  192.003328] usb-storage:  00 00 00 00 00 00
[  192.003334] usb-storage: Bulk Command S 0x43425355 T 0x86 L 0 F 0 Trg 0 LUN 0 CL 6
[  192.003336] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.003482] usb-storage: Status code 0; transferred 31/31
[  192.003484] usb-storage: -- transfer complete
[  192.003485] usb-storage: Bulk command transfer result=0
[  192.003487] usb-storage: Attempting to get CSW...
[  192.003488] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.004604] usb-storage: Status code 0; transferred 13/13
[  192.004605] usb-storage: -- transfer complete
[  192.004606] usb-storage: Bulk status result = 0
[  192.004608] usb-storage: Bulk Status S 0x53425355 T 0x86 R 0 Stat 0x1
[  192.004610] usb-storage: -- transport indicates command failure
[  192.004611] usb-storage: Issuing auto-REQUEST_SENSE
[  192.004614] usb-storage: Bulk Command S 0x43425355 T 0x87 L 18 F 128 Trg 0 LUN 0 CL 6
[  192.004616] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.004728] usb-storage: Status code 0; transferred 31/31
[  192.004729] usb-storage: -- transfer complete
[  192.004730] usb-storage: Bulk command transfer result=0
[  192.004732] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  192.004853] usb-storage: Status code 0; transferred 18/18
[  192.004854] usb-storage: -- transfer complete
[  192.004855] usb-storage: Bulk data transfer result 0x0
[  192.004857] usb-storage: Attempting to get CSW...
[  192.004858] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.004978] usb-storage: Status code 0; transferred 13/13
[  192.004979] usb-storage: -- transfer complete
[  192.004981] usb-storage: Bulk status result = 0
[  192.004982] usb-storage: Bulk Status S 0x53425355 T 0x87 R 0 Stat 0x0
[  192.004984] usb-storage: -- Result from auto-sense is 0
[  192.004986] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  192.004990] usb-storage: Not Ready: Medium not present
[  192.004992] usb-storage: scsi cmd done, result=0x2
[  192.004994] usb-storage: *** thread sleeping.
[  192.005005] usb-storage: queuecommand_lck called
[  192.005009] usb-storage: *** thread awakened.
[  192.005010] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  192.005012] usb-storage:  00 00 00 00 00 00
[  192.005016] usb-storage: Bulk Command S 0x43425355 T 0x88 L 0 F 0 Trg 0 LUN 0 CL 6
[  192.005018] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.005104] usb-storage: Status code 0; transferred 31/31
[  192.005105] usb-storage: -- transfer complete
[  192.005106] usb-storage: Bulk command transfer result=0
[  192.005107] usb-storage: Attempting to get CSW...
[  192.005109] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.005227] usb-storage: Status code 0; transferred 13/13
[  192.005228] usb-storage: -- transfer complete
[  192.005230] usb-storage: Bulk status result = 0
[  192.005232] usb-storage: Bulk Status S 0x53425355 T 0x88 R 0 Stat 0x1
[  192.005233] usb-storage: -- transport indicates command failure
[  192.005234] usb-storage: Issuing auto-REQUEST_SENSE
[  192.005236] usb-storage: Bulk Command S 0x43425355 T 0x89 L 18 F 128 Trg 0 LUN 0 CL 6
[  192.005238] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.005353] usb-storage: Status code 0; transferred 31/31
[  192.005354] usb-storage: -- transfer complete
[  192.005355] usb-storage: Bulk command transfer result=0
[  192.005357] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  192.005478] usb-storage: Status code 0; transferred 18/18
[  192.005479] usb-storage: -- transfer complete
[  192.005480] usb-storage: Bulk data transfer result 0x0
[  192.005481] usb-storage: Attempting to get CSW...
[  192.005483] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.005602] usb-storage: Status code 0; transferred 13/13
[  192.005604] usb-storage: -- transfer complete
[  192.005605] usb-storage: Bulk status result = 0
[  192.005607] usb-storage: Bulk Status S 0x53425355 T 0x89 R 0 Stat 0x0
[  192.005608] usb-storage: -- Result from auto-sense is 0
[  192.005610] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  192.005612] usb-storage: Not Ready: Medium not present
[  192.005614] usb-storage: scsi cmd done, result=0x2
[  192.005615] usb-storage: *** thread sleeping.
[  192.005621] usb-storage: queuecommand_lck called
[  192.005623] usb-storage: *** thread awakened.
[  192.005625] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  192.005626] usb-storage:  1e 00 00 00 01 00
[  192.005630] usb-storage: Bulk Command S 0x43425355 T 0x8a L 0 F 0 Trg 0 LUN 0 CL 6
[  192.005632] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.005728] usb-storage: Status code 0; transferred 31/31
[  192.005729] usb-storage: -- transfer complete
[  192.005731] usb-storage: Bulk command transfer result=0
[  192.005732] usb-storage: Attempting to get CSW...
[  192.005733] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.005852] usb-storage: Status code 0; transferred 13/13
[  192.005854] usb-storage: -- transfer complete
[  192.005855] usb-storage: Bulk status result = 0
[  192.005857] usb-storage: Bulk Status S 0x53425355 T 0x8a R 0 Stat 0x0
[  192.005858] usb-storage: scsi cmd done, result=0x0
[  192.005860] usb-storage: *** thread sleeping.
[  192.005868] usb-storage: queuecommand_lck called
[  192.005872] usb-storage: *** thread awakened.
[  192.005874] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[  192.005875] usb-storage:  1e 00 00 00 00 00
[  192.005879] usb-storage: Bulk Command S 0x43425355 T 0x8b L 0 F 0 Trg 0 LUN 0 CL 6
[  192.005881] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.005978] usb-storage: Status code 0; transferred 31/31
[  192.005979] usb-storage: -- transfer complete
[  192.005980] usb-storage: Bulk command transfer result=0
[  192.005982] usb-storage: Attempting to get CSW...
[  192.005983] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.006103] usb-storage: Status code 0; transferred 13/13
[  192.006104] usb-storage: -- transfer complete
[  192.006105] usb-storage: Bulk status result = 0
[  192.006107] usb-storage: Bulk Status S 0x53425355 T 0x8b R 0 Stat 0x0
[  192.006109] usb-storage: scsi cmd done, result=0x0
[  192.006110] usb-storage: *** thread sleeping.
[  192.006113] usb-storage: queuecommand_lck called
[  192.006116] usb-storage: *** thread awakened.
[  192.006117] usb-storage: Command TEST_UNIT_READY (6 bytes)
[  192.006118] usb-storage:  00 00 00 00 00 00
[  192.006123] usb-storage: Bulk Command S 0x43425355 T 0x8c L 0 F 0 Trg 0 LUN 0 CL 6
[  192.006124] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.006228] usb-storage: Status code 0; transferred 31/31
[  192.006230] usb-storage: -- transfer complete
[  192.006231] usb-storage: Bulk command transfer result=0
[  192.006232] usb-storage: Attempting to get CSW...
[  192.006234] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.006352] usb-storage: Status code 0; transferred 13/13
[  192.006353] usb-storage: -- transfer complete
[  192.006355] usb-storage: Bulk status result = 0
[  192.006356] usb-storage: Bulk Status S 0x53425355 T 0x8c R 0 Stat 0x1
[  192.006358] usb-storage: -- transport indicates command failure
[  192.006359] usb-storage: Issuing auto-REQUEST_SENSE
[  192.006361] usb-storage: Bulk Command S 0x43425355 T 0x8d L 18 F 128 Trg 0 LUN 0 CL 6
[  192.006363] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[  192.006478] usb-storage: Status code 0; transferred 31/31
[  192.006479] usb-storage: -- transfer complete
[  192.006480] usb-storage: Bulk command transfer result=0
[  192.006482] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
[  192.006604] usb-storage: Status code 0; transferred 18/18
[  192.006605] usb-storage: -- transfer complete
[  192.006607] usb-storage: Bulk data transfer result 0x0
[  192.006608] usb-storage: Attempting to get CSW...
[  192.006609] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[  192.006727] usb-storage: Status code 0; transferred 13/13
[  192.006728] usb-storage: -- transfer complete
[  192.006730] usb-storage: Bulk status result = 0
[  192.006731] usb-storage: Bulk Status S 0x53425355 T 0x8d R 0 Stat 0x0
[  192.006733] usb-storage: -- Result from auto-sense is 0
[  192.006735] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[  192.006737] usb-storage: Not Ready: Medium not present
[  192.006738] usb-storage: scsi cmd done, result=0x2
[  192.006740] usb-storage: *** thread sleeping.