Alex Courbot <acourbot@xxxxxxxxxx> writes:
> The board features a USB GSM modem using the usb_wwan module. Once in
> a while, when the system resumes from LP0, a NET_RX softirq will be
> triggered while the modem is still being resumed, calling
> usb_wwan_write(). This will cause usb_autopm_get_interface_async()
> inside usb_wwan_write() to fail because the runtime PM disable_depth
> is still equal to 1 since device_resume() has not completed yet. As a
> result, the modem just stops working.
I believe the usb_autopm_get_interface_async() failing is OK in this
case, but that should not cause the modem to stop working.
Wonder if this patch solves the problem? :
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@xxxxxxx>
Date: Thu, 14 Feb 2013 18:34:48 +0100
Subject: [PATCH] USB: usb_wwan: clear port busy state on error
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Reported-by: Alex Courbot <acourbot@xxxxxxxxxx>
Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
---
drivers/usb/serial/usb_wwan.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 01c94aa..44e106d 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -230,8 +230,10 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
usb_pipeendpoint(this_urb->pipe), i);
err = usb_autopm_get_interface_async(port->serial->interface);
- if (err < 0)
+ if (err < 0) {
+ clear_bit(i, &portdata->out_busy);
break;
+ }
/* send the data */
memcpy(this_urb->transfer_buffer, buf, todo);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
