Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> writes: > From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> > > This patch makes it possible to configure the PTW and PTS bits inside > the portsc register for host and device mode before the driver starts > and the phy can be addressed as hardware implementation is designed. > > Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> > Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/usb/ci13xxx-imx.txt | 5 +++ > drivers/usb/chipidea/bits.h | 14 ++++++- > drivers/usb/chipidea/ci13xxx_imx.c | 3 ++ > drivers/usb/chipidea/core.c | 39 ++++++++++++++++++++ > include/linux/usb/chipidea.h | 1 + > 5 files changed, 61 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > index 5778b9c..dd42ccd 100644 > --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > @@ -5,6 +5,11 @@ Required properties: > - reg: Should contain registers location and length > - interrupts: Should contain controller interrupt > > +Recommended properies: > +- phy_type: the type of the phy connected to the core. Should be one > + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this > + property the PORTSC register won't be touched > + Looks like this bit belongs to patch 3/9, where you're adding devicetree hooks. Otherwise looks good. Regards, -- Alex -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
