On Tue, 2013-02-12 at 13:42 +0100, Bjørn Mork wrote:
> Interface layout:
>
> 00 CD-ROM
> 01 debug COM port
> 02 AP control port
> 03 modem
> 04 usb-ethernet
Any idea what AT command set the thing uses? If it's got an ethernet
port, then it's going to have some proprietary commands to start/stop
the ethernet interface. Also, happen to know if it uses DHCP or static
IP for the ethernet?
Dan
> Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0408 ProdID=ea42 Rev= 0.00
> S: Manufacturer=Qualcomm, Incorporated
> S: Product=Qualcomm CDMA Technologies MSM
> S: SerialNumber=353568051xxxxxx
> C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
> ---
> drivers/usb/serial/option.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 868a57d..004f5b0 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -576,6 +576,8 @@ static const struct usb_device_id option_ids[] = {
> { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
> { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
> { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
> + { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
> + .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
> { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
> .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
> { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
