The current ordering in makefile makes gadget drivers to be loaded before usb functions making usb_get_function_instance() to fail when the modules are *built-in* the kernel. Changed the ordering here so that USB functions are loaded before gadget drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- drivers/usb/gadget/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 97a13c3..82fb225 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +# USB Functions +obj-$(CONFIG_USB_F_ACM) += f_acm.o +f_ss_lb-y := f_loopback.o f_sourcesink.o +obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o +obj-$(CONFIG_USB_U_SERIAL) += u_serial.o + # # USB gadget drivers # @@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o - -# USB Functions -obj-$(CONFIG_USB_F_ACM) += f_acm.o -f_ss_lb-y := f_loopback.o f_sourcesink.o -obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o -obj-$(CONFIG_USB_U_SERIAL) += u_serial.o -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
