Hi Tony & Greg, What's the best way to get these patches in? All patches have been acked by respective maintainers. If Tony can Ack the arch/arm/mach-omap2 stuff then should I send a pull request directly to Greg? or the other way round? Tony, fyi, these patches should not interfere with the dw3c/musb stuff sent by Felipe & Kishon. cheers, -roger On 01/28/2013 01:30 PM, Roger Quadros wrote: > Hi, > > The OMAP's High Speed Host controller can interface to ULPI/UTMI > PHYs transparently i.e. whithout requiring the device drivers to > access the PHY. However, the OS must ensure that the PHY has the necessary > resources (power/clock/reset) enabled before it is used. > > Till now, the omap-ehci driver was managing the power and reset of the PHY > whereas, clock enabling was left to the bootloader or board files. > > In this patchset we make the NOP PHY driver (nop-usb-xceiv.c) handle > all the PHY resources that are available so that it can be used by > platforms like OMAP. > > The board files add the PHY as a platform device and use usb_bind_phy() > (API introduced in [2]) to bind the PHY device to the controller's port. > The ehci-omap driver then uses usb_get_phy_dev() to get the PHY device > associated to the controller's port. > > All this results in a much cleaner code and makes USB PHY resource management > work properly on OMAP. > > NOTE: Tested on 4460ES-B1 Panda and BeagleBoard C4 only. Other boards are only > build tested. > > Patches are based on Linux-3.8-rc5 and depend on > > [1] [PATCH v9 00/20] OMAP USB Host cleanup > https://lkml.org/lkml/2013/1/23/155 > > [2] [PATCH v2 0/6] USB: Add support for multiple PHYs of same type > https://lkml.org/lkml/2013/1/24/876 > > v2: > - Added Alan's patch to split ehci-omap into separate driver > - Addressed Russell King's comments on usage of clk/regulator framework. > - Adapted all board using ehci-omap to using the PHY mechanism. > > The following changes since commit e18d48b7f7e563664a41d4658b8cc15679ee4745: > > usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type (2013-01-28 12:20:54 +0200) > > git://github.com/rogerq/linux.git linux-usbhost15 > > --- > Alan Stern (1): > USB: EHCI: split ehci-omap out to a separate driver > > Roger Quadros (29): > usb: phy: nop: use devm_kzalloc() > usb: phy: nop: Manage PHY clock > usb: phy: nop: Handle power supply regulator for the PHY > usb: phy: nop: Handle RESET for the PHY > usb: phy: nop: use new PHY API to register PHY > mfd: omap-usb-host: update nports in platform_data > mfd: omap-usb-host: Remove PHY reset handling code > USB: ehci-omap: Use devm_request_and_ioremap() > USB: ehci-omap: Use PHY APIs to get the PHY device and put it out of > suspend > usb: ehci-omap: Remove PHY reset handling code > usb: ehci-omap: Remove PHY regulator handling code > ARM: OMAP2+: omap4panda: Provide USB Host's PHY platform data > ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes > ARM: OMAP3: Beagle: Adapt to ehci-omap changes > ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes > ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes > ARM: OMAP: AM3517crane: Adapt to ehci-omap changes > ARM: OMAP: AM3517evm: Adapt to ehci-omap changes > ARM: OMAP3: cm-t35: Adapt to ehci-omap changes > ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes > ARM: OMAP: devkit8000: Adapt to ehci-omap changes > ARM: OMAP3: igep0020: Adapt to ehci-omap changes > ARM: OMAP3: omap3evm: Adapt to ehci-omap changes > ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes > ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes > ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes > ARM: OMAP3: overo: Adapt to ehci-omap changes > ARM: OMAP: zoom: Adapt to ehci-omap changes > ARM: OMAP: USB: Remove unused fields from struct > usbhs_omap_platform_data > > arch/arm/mach-omap2/board-3430sdp.c | 99 +++++++++++- > arch/arm/mach-omap2/board-3630sdp.c | 100 +++++++++++- > arch/arm/mach-omap2/board-am3517crane.c | 95 ++++++++++-- > arch/arm/mach-omap2/board-am3517evm.c | 66 +++++++- > arch/arm/mach-omap2/board-cm-t35.c | 95 ++++++++++- > arch/arm/mach-omap2/board-cm-t3517.c | 97 +++++++++++- > arch/arm/mach-omap2/board-devkit8000.c | 20 ++- > arch/arm/mach-omap2/board-igep0020.c | 112 +++++++++++-- > arch/arm/mach-omap2/board-omap3beagle.c | 93 ++++++++++- > arch/arm/mach-omap2/board-omap3evm.c | 63 ++++++-- > arch/arm/mach-omap2/board-omap3pandora.c | 54 +++++- > arch/arm/mach-omap2/board-omap3stalker.c | 52 +++++- > arch/arm/mach-omap2/board-omap3touchbook.c | 62 ++++++- > arch/arm/mach-omap2/board-omap4panda.c | 123 ++++++++++---- > arch/arm/mach-omap2/board-overo.c | 55 ++++++- > arch/arm/mach-omap2/board-zoom.c | 56 ++++++- > drivers/mfd/omap-usb-host.c | 48 +------ > drivers/usb/host/Kconfig | 2 +- > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-hcd.c | 6 +- > drivers/usb/host/ehci-omap.c | 245 +++++++++++----------------- > drivers/usb/otg/nop-usb-xceiv.c | 106 +++++++++++-- > include/linux/platform_data/usb-omap.h | 3 - > include/linux/usb/nop-usb-xceiv.h | 1 + > 24 files changed, 1288 insertions(+), 366 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
